Filter interviews by
I applied via Naukri.com and was interviewed in Oct 2021. There were 3 interview rounds.
I am an experienced Senior Safety Engineer with a strong background in ensuring workplace safety and implementing safety protocols.
Over 10 years of experience in the field of safety engineering
Expertise in conducting risk assessments and developing safety procedures
Proven track record of successfully implementing safety measures to prevent accidents and injuries
Strong knowledge of safety regulations and standards
Experi...
The scope of the project is to ensure the safety of senior citizens by implementing measures to prevent accidents and provide assistance in emergency situations.
Implementing safety protocols and guidelines for senior living facilities
Conducting risk assessments and identifying potential hazards
Developing emergency response plans and procedures
Training staff and residents on safety measures and emergency protocols
Instal...
An EHS plan is a document that outlines an organization's policies and procedures for ensuring the safety and health of employees and the environment.
EHS stands for Environment, Health, and Safety
The plan should identify potential hazards and risks, and provide measures to mitigate them
It should also include emergency response procedures and training programs
Examples of EHS plans include spill prevention plans, hazardo...
The client, authority engineer, and safety consultant are key stakeholders in the project.
The client is the individual or organization that initiates and funds the project.
The authority engineer is responsible for ensuring compliance with relevant regulations and standards.
The safety consultant provides expertise and guidance on safety measures and risk mitigation.
Examples: Client - a construction company, Authority en...
Critical lifting refers to the process of lifting heavy loads that require special attention and precautions to ensure safety.
It involves assessing the weight and dimensions of the load, as well as the lifting equipment and environment.
Proper planning, communication, and coordination are essential to minimize risks and prevent accidents.
Examples include lifting large machinery, construction materials, and heavy equipme...
Tandem lifting is a technique of lifting heavy loads using two or more cranes working in unison.
It involves coordinating the movements of multiple cranes to lift a single load.
It is commonly used in construction and industrial settings.
Tandem lifting requires careful planning and communication between crane operators.
The load being lifted must be evenly distributed between the cranes to prevent accidents.
Examples of ta...
The thumb rule for load calculation of wire rope sling and D-shackles is to not exceed the working load limit (WLL).
The WLL is usually marked on the sling or shackle.
The load should never exceed the WLL, even if the sling or shackle appears to be in good condition.
Factors such as angle of lift, number of legs, and type of hitch can affect the WLL.
Consult industry standards and guidelines for specific load calculations.
...
Legal requirements in the current project include compliance with safety regulations and standards.
Compliance with local, state, and federal safety regulations
Adherence to industry-specific safety standards
Documentation and reporting of safety measures
Regular safety inspections and audits
Training and certification requirements for safety personnel
Yes, there have been accidents at my workplace in the past.
Accidents are unfortunate but can happen in any workplace.
It is important to learn from accidents and take measures to prevent them in the future.
Examples of accidents at my workplace include slips, trips, and falls, equipment malfunctions, and chemical spills.
We have implemented safety protocols and training programs to minimize the risk of accidents.
Regular s...
I have a strong background in safety engineering and have achieved significant results in improving safety measures.
Bachelor's degree in Safety Engineering
Certified Safety Professional (CSP)
10+ years of experience in safety engineering
Implemented safety protocols resulting in a 30% reduction in workplace accidents
Developed and conducted safety training programs for employees
Led a team in conducting thorough safety audi...
I applied via Naukri.com
Tiles IS code refers to the Indian Standard codes related to tiles used in construction.
IS 13630:2013 - Ceramic Tiles - Definitions, classification, characteristics and marking
IS 15622:2006 - Ceramic Tiles - Methods of test
IS 1237:2012 - Terrazzo tiles
IS 13753:1993 - Ceramic glazed tiles
IS 13755:1993 - Ceramic unglazed vitreous tiles
Materials testing involves conducting various tests on construction materials to ensure quality and durability. Design mix preparation involves creating the ideal combination of materials for a specific project.
Conducting tests on materials such as concrete, asphalt, steel, and aggregates to assess their properties
Following standard testing procedures to ensure accurate and reliable results
Analyzing test results to det...
I appeared for an interview in Dec 2024.
My experience in handling complex legal cases and providing strategic legal advice aligns well with the company's need for a Legal Head.
Extensive experience in handling legal matters and providing strategic advice
Proven track record of success in managing complex legal cases
Strong understanding of relevant laws and regulations
Ability to lead a team of legal professionals effectively
Experience in developing and implemen
Shapoorji Pallonji Group interview questions for popular designations
Only objective questions little bit tough but all ok
Get interview-ready with Top Shapoorji Pallonji Group Interview Questions
I appeared for an interview in Dec 2024.
The interview was thorough and challenging, with a focus on leadership experience and problem-solving skills.
Discussed previous leadership roles and how I handled challenging situations
Gave examples of successful projects I managed and the outcomes
Talked about my problem-solving approach and strategies
Asked about my vision for the team and how I would drive success
I had a positive experience with the work culture in my previous job.
Encouraged collaboration and teamwork
Open communication between employees and management
Emphasis on work-life balance
Recognition and appreciation for hard work
Supportive and inclusive environment
I have over 10 years of experience in senior management roles, leading teams and driving strategic initiatives.
Led cross-functional teams to successfully launch new products
Implemented cost-saving measures resulting in a 15% increase in profitability
Developed and executed strategic plans to drive business growth
Managed key client relationships and negotiated contracts
Yes, I am open to relocating for the right opportunity.
I am open to relocating for the right opportunity
I have relocated for previous roles and am comfortable with the process
I am excited about the possibility of experiencing a new location and culture
I applied via Recruitment Consulltant and was interviewed in Nov 2024. There was 1 interview round.
I appeared for an interview in Aug 2024.
I have 8 years of post-qualification experience in quality management.
Managed quality control processes to ensure compliance with industry standards
Implemented quality improvement initiatives to enhance product/service quality
Led cross-functional teams to address quality issues and drive continuous improvement
Conducted audits and inspections to identify areas for improvement
Utilized data analysis tools to monitor quali
I have 5 years of experience in waterproofing work, including managing projects, conducting inspections, and ensuring quality standards are met.
Managed waterproofing projects from start to finish
Conducted inspections to ensure quality and compliance with regulations
Implemented quality control measures to meet industry standards
Collaborated with contractors and clients to address any issues or concerns
Utilized waterproo...
I have 5 years of experience working with fire doors in commercial buildings.
Performed regular inspections and maintenance on fire doors to ensure they meet safety standards
Coordinated with contractors for installation and repairs of fire doors
Conducted training sessions for staff on proper use and maintenance of fire doors
I have 5 years of experience working with wooden materials in various projects.
Experience in selecting high-quality wood for projects
Knowledge of different types of wood and their properties
Skilled in cutting, shaping, and finishing wood
Ability to troubleshoot and fix issues with wooden structures
Experience in designing and building wooden furniture
I appeared for an interview in Jul 2024.
Civil work, piling work fabrication and erection
No ather cuntry, only my country india
Mumbai, Surat, Jharkhand, madhyapradesh
I applied via Approached by Company and was interviewed in Jun 2024. There were 3 interview rounds.
I am a finishing engineer with 5 years of experience in surface treatment and coatings. I have a strong attention to detail and a passion for delivering high-quality finishes.
5 years of experience in surface treatment and coatings
Strong attention to detail
Passion for delivering high-quality finishes
The finishing sequence for flats typically involves cleaning, sanding, priming, painting, and sealing.
Start by cleaning the surface to remove any dirt or debris
Sand the surface to create a smooth and even texture
Apply a primer to improve adhesion and coverage of the paint
Paint the surface with the desired color and finish
Finish by sealing the surface to protect the paint and provide durability
Example: Cleaning -> Sa
I will be joining on the first Monday of next month.
I will be starting on the first Monday of next month.
My start date is scheduled for the beginning of next month.
I plan to join at the start of the upcoming month.
After Technical round, There will be Link send on email address. Technical and Aptitude both sections are there.
Some of the top questions asked at the Shapoorji Pallonji Group interview -
The duration of Shapoorji Pallonji Group interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 325 interviews
Interview experience
based on 4.8k reviews
Rating in categories
Deputy Manager
626
salaries
| ₹6 L/yr - ₹17.5 L/yr |
Senior Engineer
444
salaries
| ₹4 L/yr - ₹12 L/yr |
Construction Engineer
281
salaries
| ₹3 L/yr - ₹8.5 L/yr |
Civil Engineer
270
salaries
| ₹2 L/yr - ₹8.9 L/yr |
Civil Site Engineer
230
salaries
| ₹1.5 L/yr - ₹9 L/yr |
Larsen & Toubro Limited
Tata Projects
Alstom Transportation
Kalpataru Projects International