Upload Button Icon Add office photos

R.S. Infraprojects

Compare button icon Compare button icon Compare

Filter interviews by

R.S. Infraprojects Interview Questions, Process, and Tips

Updated 27 Jan 2025

Top R.S. Infraprojects Interview Questions and Answers

View all 10 questions

R.S. Infraprojects Interview Experiences

Popular Designations

21 interviews found

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Maximum span under bridges
  • Ans. 

    The maximum span under bridges depends on various factors such as bridge type, design, and load capacity.

    • The maximum span under bridges is determined by the bridge type and design.

    • Factors such as the load capacity of the bridge and the materials used also affect the maximum span.

    • Different types of bridges have different maximum spans, for example, a suspension bridge can have a much longer span compared to a beam bridg...

  • Answered by AI
  • Q2. Required Main technical data for making LOP and CSD
  • Ans. Site survey details and clearance, infringement if any on site, is required for making LOP & CSD.
  • Answered Anonymously
  • Q3. Clearance from signals in front and back side
  • Ans. 

    Clearance from signals in front and back side is important for safety and efficient operation.

    • Clearance refers to the minimum distance required between the signals and any surrounding objects or structures.

    • It ensures that there is no interference or obstruction to the signals' visibility or functionality.

    • Clearance requirements may vary depending on the specific signal type and its intended purpose.

    • For example, in traff...

  • Answered by AI
  • Q4. For making LOP what data exactly required?
  • Ans. 

    For making LOP, the required data includes the electrical load details, power supply specifications, circuit layout, and safety regulations.

    • Electrical load details such as the type of equipment, power rating, and operating voltage are necessary.

    • Power supply specifications like the voltage level, frequency, and phase configuration are important.

    • The circuit layout, including the arrangement of components, wiring, and con...

  • Answered by AI
  • Q5. For making CSD what data exectly required?
  • Ans. 

    The data required for making CSD includes specifications, schematics, component datasheets, and design constraints.

    • Specifications of the electrical system

    • Schematics of the circuit design

    • Datasheets of the components being used

    • Design constraints and requirements

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Why you leaving your last organisation?
  • Ans. 

    Seeking new challenges and growth opportunities.

    • Looking for a more challenging role to further develop my skills and expertise.

    • Seeking a company that aligns better with my long-term career goals.

    • Desire to work on more innovative projects and cutting-edge technologies.

    • Wishing to broaden my professional network and learn from new colleagues.

    • Wanting to explore different industry sectors and gain diverse experience.

  • Answered by AI
  • Q2. What was your last salary as per last 3 months salary slip?
  • Ans. 

    I am unable to provide my last salary as I do not have access to the data.

    • I do not have the available data to provide my last salary

    • I am unable to access my salary information for the last 3 months

    • Unfortunately, I cannot provide the requested information

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please take in written promise s given from HR otherwise there are bad at after joining.

Skills evaluated in this interview

Electrical Design Engineer Interview Questions asked at other Companies

Q1. 8.How do we calculate Cabel sizing? Formula for Voltage drop? How do we calculate resistive & Inductive drop? Why do we limit voltage drop to 5 percent?
View answer (3)

Interview Questions & Answers

user image Anonymous

posted on 25 Jun 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. Knowledge about survey equipments?
  • Q2. Knowledge about profiling and other proposals?
  • Q3. Knowledge about contour and benching in transmission line?
  • Q4. Which is required for start survey at starting point?
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is the reason for using I-section in the design of girders?

Assistant Bridge Engineer Interview Questions asked at other Companies

Q1. Which type of pile in your major bridge, methodology of piling?
View answer (3)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Dance 

(2 Questions)

  • Q1. Do you all like dance? We should dance please tell.
  • Ans. We should dance, it is very good for our body, similarly we should wake up in the morning and keep our mind calm.
  • Answered by mysticalpoison
  • Q2. How do you all like the job?

Interview Preparation Tips

Interview preparation tips for other job seekers - More likely than not, if you and your friend are in even a remotely related field, she’ll want to know if you have contacts who could help. If you do, you can offer to send her resume out to people in your network, introduce her to specific people who might be helpful, or recommend her to a hiring manager.

You all are downloading our app, we will tell you about many jobs which are in demand for you and also beneficial which you will like very much. We will tell you about many jobs for you...

First of all you should know that you are perfect in something and you should do whatever feels good to you. Don't live under anyone's pressure....😌🙏🏻🙏🏻

Senior Supervisor Interview Questions asked at other Companies

Q1. What is standard height between WC Outlet centre to Inlet center?
View answer (1)

R.S. Infraprojects interview questions for popular designations

 Design Engineer

 (2)

 Deputy Project Manager

 (1)

 Senior Engineer

 (1)

 Senior Vice President

 (1)

 Electrical Engineer

 (1)

 Production Engineer

 (1)

 Electrical Design Engineer

 (1)

 Store Incharge

 (1)

Senior Vice President Interview Questions & Answers

user image Jayanta Ganguli

posted on 14 Jun 2024

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.

Round 1 - Just to know how Techno runs 

(1 Question)

  • Q1. How Techno is successful
  • Ans. 

    Techno is successful by staying ahead of trends, adapting quickly, and fostering innovation.

    • Staying ahead of trends by constantly researching and investing in new technologies

    • Adapting quickly to changes in the market and consumer preferences

    • Fostering innovation through a culture of creativity and experimentation

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - No future.

Senior Vice President Interview Questions asked at other Companies

Q1. How large is the Indian freight forwarding industry in terms of revenues
View answer (1)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Group Discussion 

Discuss about experience

Deputy Project Manager Interview Questions asked at other Companies

Q1. If contractors not compliance spec. Then what do you want or take action against.
View answer (2)
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed before Jan 2024.

Round 1 - Group Discussion 

Information about future engineering in construction sector and how can we find thier alternatives

Round 2 - HR 

(1 Question)

  • Q1. Negotiation on salary

Accounts Manager Interview Questions asked at other Companies

Q1. Tell me an analysis about how to factor customer or prospects for your product segment
View answer (5)
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Related to Stores in Power Transmission Tower Line

Store Assistant Trainee Interview Questions asked at other Companies

Q1. What is reason for the you seclect to store department?
View answer (1)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Normal Discussion as per your pervious companies work related.
  • Q2. About your self introduction.
  • Q3. Related SCM job responsibility.

Interview Preparation Tips

Interview preparation tips for other job seekers - AVP purchase discussion your pervious company SCM related works/Responsibilities.

Assistant Manager - SCM Interview Questions asked at other Companies

Q1. What is your understanding of Supply Chain and explain how it affects a business?
View answer (1)

Design Engineer Interview Questions & Answers

user image Ritik Kumar Varman

posted on 13 Jun 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. What is the appropriate size for a beam?
  • Ans. 

    The appropriate size for a beam depends on factors such as load, span, material, and building codes.

    • Consider the load the beam will need to support

    • Calculate the span of the beam

    • Select an appropriate material for the beam based on strength and durability

    • Ensure the beam meets building code requirements for safety

  • Answered by AI

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. About yourself and work experience related
  • Q2. About MTECH thesis

Senior Engineer Interview Questions asked at other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
View answer (57)

R.S. Infraprojects Interview FAQs

How many rounds are there in R.S. Infraprojects interview?
R.S. Infraprojects interview process usually has 1-2 rounds. The most common rounds in the R.S. Infraprojects interview process are Resume Shortlist, HR and One-on-one Round.
How to prepare for R.S. Infraprojects interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at R.S. Infraprojects. The most common topics and skills that interviewers at R.S. Infraprojects expect are Leadership, Project Management, Transmission Line, Business Development and Substation.
What are the top questions asked in R.S. Infraprojects interview?

Some of the top questions asked at the R.S. Infraprojects interview -

  1. For making LOP what data exactly requir...read more
  2. For making CSD what data exectly requir...read more
  3. What is processing of transmission line survey wo...read more
How long is the R.S. Infraprojects interview process?

The duration of R.S. Infraprojects interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

R.S. Infraprojects Interview Process

based on 39 interviews

Interview experience

4.3
  
Good
View more

R.S. Infraprojects Reviews and Ratings

based on 444 reviews

4.0/5

Rating in categories

3.7

Skill development

3.8

Work-life balance

3.6

Salary

3.9

Job security

3.7

Company culture

3.2

Promotions

3.7

Work satisfaction

Explore 444 Reviews and Ratings
Assistant Manager
80 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
58 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
57 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
46 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare R.S. Infraprojects with

Larsen & Toubro Limited

4.0
Compare

Tata Projects

4.2
Compare

Hindustan Construction Company

4.2
Compare

GMR Group

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview