Add office photos
Filter interviews by
Preca Solutions Senior Civil Site Engineer Interview Questions and Answers
Preca Solutions Senior Civil Site Engineer Interview Experiences
1 interview found
Selected
I applied via Recruitment Consulltant and was interviewed before Jul 2022. There were 3 interview rounds.
(1 Question)
- Q1. Basic questions about construction
(2 Questions)
- Q1. Measurements boq's bbs
- Q2. Basics of construction
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
(5 Questions)
- Q1. Why are remove the pile head.
- Ans.
Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.
To prepare for further construction on top of the piles
To ensure proper load transfer to the foundation
To facilitate the installation of pile caps or beams
To adjust the pile length if necessary
- Q2. How many deduction of 90 degree angle.
- Ans.
There are four deductions of 90 degree angles.
A 90 degree angle is formed when two lines intersect at a right angle.
In a square, all four angles are 90 degrees.
In a rectangle, opposite angles are 90 degrees.
In a right triangle, one angle is always 90 degrees.
- Q3. What is static load test and dynamic load test.
- Ans.
Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.
Static load test involves applying a constant load to a structure and measuring its response over time.
Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.
Static load test helps determine the maxi...
- Q4. How many tolerance of pile load test.
- Ans.
The number of tolerance of pile load test depends on the specific project requirements and standards.
The number of tolerance of pile load test can vary based on the project specifications and standards.
Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.
Some projects may have more stringent tolerance requirements depending on the criticality of the structure.
It is important to refer...
- Q5. What is rang Density of bentonite and why is this use.
- Ans.
Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.
Range density of bentonite is typically between 17-22 lb/gal.
Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.
The range density of bentonite is important for determining its effectiveness in different applications.
Higher range density ...
Skills evaluated in this interview
Civil Site Engineer Interview Questions & Answers
D.p. Jain & Co. Infrastructure Pvt .
Anonymous
posted on 10 Aug 2024
Selected
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
(2 Questions)
- Q1. How much your Salary
- Ans.
My salary is competitive and based on my experience, qualifications, and the current market rates for Civil Site Engineers.
My salary is determined by factors such as my level of experience in the field.
Qualifications and certifications also play a role in determining my salary.
Market rates for Civil Site Engineers in the specific location where I work also influence my salary.
I am open to discussing salary expectations
- Q2. When you Join, We need urgent requirement
Interview Preparation Tips
Diploma Civil Engineer Interview Questions & Answers
Gaja Engineering
Anonymous
posted on 2 Mar 2024
Selected
(5 Questions)
- Q1. Technical question
- Q2. Water line Drawing wate tank
- Q3. Concrete grade & mixing
- Q4. Slump testing & cube strength
- Q5. Measurement & drawing map making
Civil Site Engineer Interview Questions & Answers
Bahwan Engineering
Anonymous
posted on 27 Oct 2023
Selected
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
(1 Question)
- Q1. 1. Self indirection ? 2. What about the fall ceiling work ? 3. What kind of material using for waterproofing ? 4. What meaning of PPM ? 5. He was supervisor one door key is missing so what can you do ? 6. ...
- Ans.
I am Loganathan Gangadharan I Finished diploma in civil engineering with 10 years experience in Construction Field. Building background to eat not come down
(4 Questions)
- Q1. 1. 12 mm Steel Rod using for construction ok that lapping length how much
- Ans.
The lapping length for a 12 mm steel rod used in construction is typically 60 times the diameter of the rod.
Lapping length is usually 60 times the diameter of the steel rod
For a 12 mm steel rod, the lapping length would be 12 mm x 60 = 720 mm
Lapping is done to ensure continuity and strength in the reinforcement
- Q2. What type of footting using the oman country
- Ans.
In Oman, commonly used footings include spread footings, strip footings, and raft footings.
Spread footings are used for individual columns or walls and distribute the load over a larger area.
Strip footings are continuous footings that support a line of columns or walls.
Raft footings are used for large or irregularly shaped structures to distribute the load over a wider area.
In Oman, due to the sandy soil conditions, de...
- Q3. One concrete floor for broken so rectify the floor what kind of material using
- Ans.
To rectify a broken concrete floor, materials like concrete mix, epoxy resin, or self-leveling compound can be used.
Use concrete mix to fill in the broken areas and level the floor.
Apply epoxy resin to seal cracks and strengthen the floor.
Consider using self-leveling compound for a smooth and even surface.
Ensure proper preparation and cleaning of the floor before applying any material.
Consult with a structural engineer
- Q4. Concrete setting times how many days
- Ans.
Concrete setting times can vary depending on factors like temperature and mix design.
Concrete typically sets within 24-48 hours, but continues to harden over time.
Factors affecting setting time include temperature, humidity, and mix design.
For example, in hot weather, concrete may set faster, while in cold weather it may take longer.
Accelerators or retarders can be added to the mix to adjust setting times as needed.
Interview Preparation Tips
Civil Site Engineer Interview Questions & Answers
Patel Infrastructure
Anonymous
posted on 29 Jan 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2023. There were 2 interview rounds.
(1 Question)
- Q1. Plz brief himself
(2 Questions)
- Q1. Which type of foundation you done?
- Ans.
I have experience with various types of foundations including shallow foundations, deep foundations, and pile foundations.
Shallow foundations: These are used when the soil is stable and can support the load of the structure. Examples include spread footings and mat foundations.
Deep foundations: These are used when the soil near the surface is not suitable for supporting the load. Examples include pile foundations and d...
- Q2. Open foundation or pile foundation
Interview Preparation Tips
- Foundation
- Girder
- Piling
- Mnb
- Mjb
- culverts
- Flyovers
- Casting yard
- Reinforcement
- Site Execution
Interview Questionnaire
6 Questions
- Q1. They were asked about previous work experience in detail.
- Q2. Previous Project details.
- Q3. Previous projects shuttering area and type of formwork
- Ans.
The previous projects involved various types of formwork with a total shuttering area of approximately 10,000 square meters.
Used traditional timber formwork for a residential building project
Implemented modular steel formwork for a commercial complex
Utilized aluminum formwork for a high-rise construction
Employed tunnel formwork for an underground structure
- Q4. Build-up area
- Q5. About subcontractors billing.
- Q6. Formwork,steel and masonry work daily productive
Interview Preparation Tips
Selected
I applied via Job Fair and was interviewed before Jan 2022. There were 7 interview rounds.
(3 Questions)
- Q1. Hard work,.road line..pipe line.. others
- Q2. Hard work.. road line..pipe line..others
- Q3. Hard work..road line
Hard work and pipeline roadlines work...
(4 Questions)
- Q1. Hard work..road line pipe line
- Ans.
All machine.(bom loader.jcb.oather) old pipe line area.. new pipe line coverage
- Q2. Hard work..road line pipe line work
- Q3. Hard work..road line pipe line work ...
- Q4. Hard work pipe line work
Hard work and pipeline roadlines work..
(15 Questions)
- Q1. Hard work and pipeline roadlines
- Q2. Hard work and pipeline ..roadlines
- Q3. Hard work and pipeline roadlines work.
- Q4. Hard work and pipeline roadlines work..
- Q5. JCB work road line pipe..
- Q6. Hard work and pipeline ..roadlines work..
- Q7. Hard work.. pipe line work..
- Q8. Hard work and pipeline roadlines ok
- Q9. Civil foreman complete documents and..
- Q10. Hard work and JCB work road line pipe line..
- Q11. Road line pipe line.
- Q12. Hard work pipe line pipe line
- Q13. Hard work pipe line..
- Q14. Hard work road line..
- Q15. JCB work road line..
Hard work and pipeline roadlines work..
Hard work and pipeline roadlines
Interview Preparation Tips
- Civil foreman
- Graduate
Selected
I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.
(3 Questions)
- Q1. What was your previous salary what is your expect
- Ans.
I am unable to provide my previous salary as it is confidential. However, I am expecting a competitive salary based on my qualifications and experience.
My previous salary is confidential and I am unable to disclose it.
I am expecting a salary that is commensurate with my qualifications and experience.
I am open to discussing salary expectations during the negotiation process.
I believe that a competitive salary is importa...
- Q2. Previous salary 1 expected salary 2 whatever.
- Q3. Educational mass card certificate documents previous salary certificate if you worked
Interview Preparation Tips
Senior Civil Engineer Interview Questions & Answers
Onshore Construction
Anonymous
posted on 27 Dec 2019
I applied via Naukri.com and was interviewed in Nov 2019. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. All Question about from your past working projects & structure.
Interview Preparation Tips
Preca Solutions Interview FAQs
Tell us how to improve this page.
Preca Solutions Interviews By Designations
- Preca Solutions Electrician Interview Questions
- Preca Solutions Graduate Engineer Trainee (Get) Interview Questions
- Preca Solutions Land Surveyor Interview Questions
- Preca Solutions QS Engineer Interview Questions
- Preca Solutions Senior Civil Site Engineer Interview Questions
- Preca Solutions Senior Sales Associate Interview Questions
- Preca Solutions Trainee Interview Questions
Interview Questions for Popular Designations
- Civil Site Engineer Interview Questions
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
Interview Questions from Similar Companies
Preca Solutions Senior Civil Site Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Safety Officer
18
salaries
|  ₹2.1 L/yr - ₹4.5 L/yr |
|
Production Engineer
12
salaries
| ₹2.4 L/yr - ₹5 L/yr |
|
QA QC Engineer
11
salaries
| ₹2.2 L/yr - ₹5.3 L/yr |
|
Junior Engineer
11
salaries
| ₹1.9 L/yr - ₹3.7 L/yr |
|
Junior Engineer Civil
6
salaries
| ₹2.5 L/yr - ₹4.3 L/yr |
TCS
Infosys
Wipro
HCLTech
Calculate your in-hand salary
- Home >
- Interviews >
- Preca Solutions Interview Questions >
- Preca Solutions Senior Civil Site Engineer Interview Questions
