Add office photos
Filter interviews by
Bahwan Engineering Civil Site Engineer Interview Questions, Process, and Tips
Bahwan Engineering Civil Site Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
(1 Question)
- Q1. 1. Self indirection ? 2. What about the fall ceiling work ? 3. What kind of material using for waterproofing ? 4. What meaning of PPM ? 5. He was supervisor one door key is missing so what can you do ? 6. ...
- Ans.
I am Loganathan Gangadharan I Finished diploma in civil engineering with 10 years experience in Construction Field. Building background to eat not come down
(4 Questions)
- Q1. 1. 12 mm Steel Rod using for construction ok that lapping length how much
- Ans.
The lapping length for a 12 mm steel rod used in construction is typically 60 times the diameter of the rod.
Lapping length is usually 60 times the diameter of the steel rod
For a 12 mm steel rod, the lapping length would be 12 mm x 60 = 720 mm
Lapping is done to ensure continuity and strength in the reinforcement
- Q2. What type of footting using the oman country
- Ans.
In Oman, commonly used footings include spread footings, strip footings, and raft footings.
Spread footings are used for individual columns or walls and distribute the load over a larger area.
Strip footings are continuous footings that support a line of columns or walls.
Raft footings are used for large or irregularly shaped structures to distribute the load over a wider area.
In Oman, due to the sandy soil conditions, de...
- Q3. One concrete floor for broken so rectify the floor what kind of material using
- Ans.
To rectify a broken concrete floor, materials like concrete mix, epoxy resin, or self-leveling compound can be used.
Use concrete mix to fill in the broken areas and level the floor.
Apply epoxy resin to seal cracks and strengthen the floor.
Consider using self-leveling compound for a smooth and even surface.
Ensure proper preparation and cleaning of the floor before applying any material.
Consult with a structural engineer
- Q4. Concrete setting times how many days
- Ans.
Concrete setting times can vary depending on factors like temperature and mix design.
Concrete typically sets within 24-48 hours, but continues to harden over time.
Factors affecting setting time include temperature, humidity, and mix design.
For example, in hot weather, concrete may set faster, while in cold weather it may take longer.
Accelerators or retarders can be added to the mix to adjust setting times as needed.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I applied via Referral and was interviewed before May 2022. There were 3 interview rounds.
(1 Question)
- Q1. Technical specifications for IS code
- Ans.
IS code refers to Indian Standards code which provides technical specifications for various products and services.
IS codes are developed by the Bureau of Indian Standards (BIS)
They cover a wide range of products and services such as construction materials, electrical appliances, food products, and more
IS codes provide technical specifications for quality, safety, and performance of products and services
Compliance with ...
(1 Question)
- Q1. Salary expectation
Senior Civil Engineer Interview Questions & Answers
Turner Construction
Sankalp Dede
posted on 12 Nov 2024
I applied via Recruitment Consulltant
(1 Question)
- Q1. Will ask Technical Questions Related to Projects.
(1 Question)
- Q1. Will ask about past companies experience and role, responsibility etc.
Civil Foreman Interview Questions & Answers
Leighton Contractors
Romson joseph
posted on 31 Dec 2023
(1 Question)
- Q1. Procedure of laying tile and granite
- Ans.
The procedure of laying tile and granite involves preparing the surface, applying adhesive, laying the tiles/granite, grouting, and sealing.
Prepare the surface by ensuring it is clean, level, and dry.
Apply adhesive to the surface using a trowel, ensuring even coverage.
Lay the tiles/granite starting from the center and working outwards in a pattern.
Grout the tiles/granite by filling the gaps between them with grout and ...
I applied via Recruitment Consulltant and was interviewed in Aug 2022. There was 1 interview round.
(1 Question)
- Q1. Bbs, shuttering, leveling, testing, quality.
Interview Preparation Tips
Interview Questionnaire
6 Questions
- Q1. They were asked about previous work experience in detail.
- Q2. Previous Project details.
- Q3. Previous projects shuttering area and type of formwork
- Ans.
The previous projects involved various types of formwork with a total shuttering area of approximately 10,000 square meters.
Used traditional timber formwork for a residential building project
Implemented modular steel formwork for a commercial complex
Utilized aluminum formwork for a high-rise construction
Employed tunnel formwork for an underground structure
- Q4. Build-up area
- Q5. About subcontractors billing.
- Q6. Formwork,steel and masonry work daily productive
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Mar 2022. There were 2 interview rounds.
(1 Question)
- Q1. Related to department
Interview Preparation Tips
- Related to experience
Selected
I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.
(3 Questions)
- Q1. Asking to me...... Only civil engineering questions
- Q2. Only waste water treatment plants related questions
- Q3. What is hydro power test of DI pipes...?
- Ans.
Hydro power test of DI pipes is a method to check the strength and integrity of ductile iron pipes under pressure.
Hydro power test involves filling the DI pipes with water and pressurizing them to a specified level.
The test is conducted to ensure that the pipes can withstand the pressure they will be subjected to in actual use.
Leaks or deformations during the test indicate weaknesses in the pipes.
The test helps in iden...
(2 Questions)
- Q1. Only waste water treatment plants related questions
- Q2. RCC spun related question
(2 Questions)
- Q1. What is the hydrotest pressure? Ans:- 1.5 times of design pressure.
- Ans.
The hydrotest pressure is 1.5 times the design pressure.
Hydrotest pressure is the pressure applied to a vessel or pipeline to check for leaks or defects.
It is usually done before commissioning the system.
For example, if the design pressure is 100 psi, the hydrotest pressure would be 150 psi.
- Q2. Q:- What is the procedure for fit up inspection? Ans:- Base metal Classification, cleaning, Alignment, Root gap, root face, Bevel angle & mismatch or overlap.
- Ans.
The procedure for fit up inspection includes classification, cleaning, alignment, root gap, root face, bevel angle, and mismatch or overlap.
Classify the base metal
Clean the surface
Align the parts to be joined
Check the root gap and root face
Measure the bevel angle
Check for any mismatch or overlap
Ensure all specifications are met
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before May 2022. There were 3 interview rounds.
(1 Question)
- Q1. Technical specifications for IS code
- Ans.
IS code refers to Indian Standards code which provides technical specifications for various products and services.
IS codes are developed by the Bureau of Indian Standards (BIS)
They cover a wide range of products and services such as construction materials, electrical appliances, food products, and more
IS codes provide technical specifications for quality, safety, and performance of products and services
Compliance with ...
(1 Question)
- Q1. Salary expectation
Bahwan Engineering Interview FAQs
Some of the top questions asked at the Bahwan Engineering Civil Site Engineer interview -
Tell us how to improve this page.
Bahwan Engineering Interviews By Designations
- Bahwan Engineering Barge Master Assistant Interview Questions
- Bahwan Engineering Civil Site Engineer Interview Questions
- Bahwan Engineering Diploma Mechanical Engineer Interview Questions
- Bahwan Engineering Electrical Foreman Interview Questions
- Bahwan Engineering Electrician Interview Questions
- Bahwan Engineering Electrician.I.T.I Interview Questions
- Bahwan Engineering Electronic Technician Interview Questions
- Bahwan Engineering HSE Officer Interview Questions
- Show more
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
People are getting interviews through
Civil Site Engineer Interview Questions from Similar Companies
Bahwan Engineering Civil Site Engineer Reviews and Ratings
based on 5 reviews
Rating in categories
|
Site Engineer
17
salaries
|  ₹9.1 L/yr - ₹14.9 L/yr |
|
HSE Officer
16
salaries
| ₹9.1 L/yr - ₹12.5 L/yr |
|
Hvac Supervisor
16
salaries
| ₹4.8 L/yr - ₹10.3 L/yr |
|
Assistant Manager
15
salaries
| ₹12 L/yr - ₹35 L/yr |
|
Project Engineer
13
salaries
| ₹9.2 L/yr - ₹32.4 L/yr |
Larsen & Toubro Limited
Tata Projects
Shapoorji Pallonji Group
Hindustan Construction Company
Calculate your in-hand salary
- Home >
- Interviews >
- Bahwan Engineering Interview Questions >
- Bahwan Engineering Civil Site Engineer Interview Questions
