Add office photos
i
MSPL
Compare
Filter interviews by
MSPL Interview Questions, Process, and Tips for Freshers
Top MSPL Interview Questions and Answers for Freshers
- Q1. How many degrees do the rod die in the poking hole?asked in Fireman interview
MSPL Interview Experiences for Freshers
4 interviews found
Selected
I applied via campus placement at Dr. Timmaiah Institute of Technology, K G F and was interviewed in Dec 2022. There were 2 interview rounds.
(7 Questions)
- Q1. Techanicaly improve the achieved organized goals . establishment of worker and workplace with zero hazards.occupational health and safety
- Q2. Low grade to high grade
- Q3. Solved the environmental issues
- Q4. Solved ground vibration at blasting
- Ans.
Ground vibration at blasting can be solved by using proper blasting techniques and monitoring equipment.
Use of delay timing in blasting to reduce the impact of ground vibration
Proper selection of explosives and their placement
Monitoring equipment like seismographs to measure the ground vibration levels
Implementing safety measures like limiting the blast size and distance from structures
Regular maintenance and calibrati
- Q5. Avoid the generat of fly rock
- Ans.
To avoid fly rock generation, proper drilling and blasting techniques should be followed.
Use controlled blasting techniques
Ensure proper drilling and blasting design
Use appropriate explosives and detonators
Implement effective blast monitoring and evaluation
Train personnel on safe blasting practices
- Q6. Reclamation and Rehabilitation
- Q7. Evaluation of forest
- Ans.
Evaluation of forest
Assessing the forest's biodiversity and ecosystem services
Evaluating the forest's economic value and potential for sustainable use
Analyzing the forest's health and identifying any threats or risks
Assessing the forest's social and cultural significance to local communities
Using remote sensing and GIS technology to map and monitor the forest
Considering the impacts of climate change on the forest and i...
Interview Preparation Tips
Chethan k.c.
I applied via Company Website and was interviewed in Jul 2022. There was 1 interview round.
(1 Question)
- Q1. Maintenance related technical questions
Interview Preparation Tips
Senior Engineer- Maintenance Interview Questions asked at other Companies
I applied via Campus Placement and was interviewed in Feb 2021. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. How many degrees do the rod die in the poking hole?
- Ans.
The rod doesn't die in the poking hole, it's used to poke and move burning material.
The rod is made of metal and is used to stir and move burning material in a fire.
It doesn't have a specific temperature it dies at as it's not meant to be in the fire for long periods of time.
The poking hole is a small opening in the firebox used to add air and move material around.
The rod is an important tool for firefighters to contro
- Q2. 45 to 90 degree.
Interview Preparation Tips
Fireman Interview Questions asked at other Companies
Interview Questionnaire
1 Question
- Q1. About my role & responsibilities
HR Manager Interview Questions asked at other Companies
MSPL interview questions for popular designations
Jobs at MSPL
Top trending discussions
Interview questions from similar companies
Akash Sharma
Selected
I applied via Campus Placement and was interviewed in Mar 2024. There were 6 interview rounds.
(2 Questions)
- Q1. It was like a normal behavioural questions test where candidates are required to attempt some of the questions related to one's own behaviour.
- Q2. 1.What is your nature 2.How you describe yourself most of the time ?
In apti test , for our batch, it was like a candidate will have 50 aptitude ques which has to be answer within 12 mins.
There is no negative marking and no limit, you can attempt as many as you can in specified time limit.
Note : The questions were really easy , you can refer it from Google
(1 Question)
- Q1. Technical questions were really good and conceptual. The questions paper setter have touch the competitive exam level like GATE, ESE. But If someone knows the concept, he/she can easy tackle the option or ...
Topic were quite easier. Some of the topics are
1. Is bullet train/ high speed rail a good investment in india?
2. Which is better hard work or smart work?
3. Which is necessary in a work place: speed of accuracy?
(1 Question)
- Q1. Just like a personal interview asking about introducing yourself and technical questions related to your branch
(1 Question)
- Q1. It's a special round were some higher authorities like CHRO, CXO, etc will take you interview and asking basic questions with details and depth for better selection
Interview Preparation Tips
2.Show no nervousness/tension in your face
3. Don't think like you are giving interview, just think like you are giving answers to your clg teacher.
Note: Don't fear about result, even I also got placed after rejecting by 10 or 12 companies like LnT, jsw,jspl,msil etc
Focus on process and factors that are controllable.
I applied via campus placement at Indian Institute of Technology (IIT), Jodhpur and was interviewed in Jun 2024. There was 1 interview round.
(2 Questions)
- Q1. It was an on campus recruitment. There were 2 rounds of interview, 1st one was in virtual mode and questions were mainly HR type. 2nd one was face-to-face interview took place in ranchi at Mecon office. I...
- Q2. In 2nd round, the questions was totally core based, they asked me lot of mechanical questions based on my favorite topic. There were 3 Interviewer, and you can't fool them, they were very expert in it.
Selected
I applied via Naukri.com and was interviewed in Nov 2023. There were 4 interview rounds.
(1 Question)
- Q1. Self introduction and salary expectations realted
(1 Question)
- Q1. About technical skills
(1 Question)
- Q1. Final round with director asking why are you searching new job
Graduate Trainee Interview Questions & Answers
TRL Krosaki Refractories
Anonymous
posted on 29 Mar 2024
(2 Questions)
- Q1. What is casting
- Ans.
Casting is the process of creating objects by pouring a liquid material into a mold and allowing it to harden.
Casting involves pouring a material such as metal, plastic, or concrete into a mold
The material then hardens and takes the shape of the mold
Common examples of casting include metal casting for manufacturing parts and concrete casting for construction projects
- Q2. What is the difference between drilling and boring
- Ans.
Drilling is the process of creating a hole using a rotating cutting tool, while boring is the process of enlarging an existing hole.
Drilling is typically used to create holes in materials, while boring is used to enlarge existing holes.
Drilling is usually done with a drill bit, while boring is done with a boring tool.
Drilling is often used in construction and manufacturing, while boring is commonly used in machining pr...
Skills evaluated in this interview
PhD fresher Interview Questions & Answers
Carborundum Universal Limited
Anonymous
posted on 10 Aug 2023
I applied via Referral and was interviewed in Feb 2023. There were 3 interview rounds.
(2 Questions)
- Q1. About your PHD project
- Q2. Related to company products...general methods for producing their products.like how alumina synthesized
(1 Question)
- Q1. Which position will you be after 3-5 years? How can you contribute to company...Willing to move any place across the country...
Interview Preparation Tips
I applied via Job Portal and was interviewed in Sep 2023. There were 2 interview rounds.
(5 Questions)
- Q1. Which qualification
- Q2. How your experience
- Q3. Annual income and wich position in your previous company
- Q4. Add your resume
- Q5. Intermediate 5 years 200000 Operator
Interview Preparation Tips
MSPL Interview FAQs
Tell us how to improve this page.
MSPL Interviews By Designations
- MSPL Assistant Company Secretary Interview Questions
- MSPL Assistant Manager Interview Questions
- MSPL Assistant Manager Mechanical Interview Questions
- MSPL Diploma Trainee Engineer Interview Questions
- MSPL Electrical Maintenance Engineer Interview Questions
- MSPL Fireman Interview Questions
- MSPL Graduate Engineer Trainee (Get) Interview Questions
- MSPL HR Manager Interview Questions
- Show more
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
3-5 Yrs
₹ 8-13 LPA
|
Assistant Manager
32
salaries
|  ₹4.4 L/yr - ₹12.9 L/yr |
|
Deputy Manager
22
salaries
| ₹6 L/yr - ₹14.5 L/yr |
|
Engineer
17
salaries
| ₹2.4 L/yr - ₹5.8 L/yr |
|
Mechanical Engineer
15
salaries
| ₹3 L/yr - ₹7.2 L/yr |
|
Senior Engineer
14
salaries
| ₹4.5 L/yr - ₹8 L/yr |
Tata Group
Reliance Industries
Adani Group
Bharti Enterprises
Calculate your in-hand salary
- Home >
- Interviews >
- MSPL Interview Questions >
- MSPL Interview Questions for Fresher
