Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Larsen & Toubro Limited Team. If you also belong to the team, you can get access from here

Larsen & Toubro Limited Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Larsen & Toubro Limited Executive Interview Questions and Answers

Updated 23 Dec 2024

Larsen & Toubro Limited Executive Interview Experiences

3 interviews found

Executive Interview Questions & Answers

user image Anonymous

posted on 23 Dec 2024

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(5 Questions)

  • Q1. Are you currently employed, and are you prepared to transition to the offered position?
  • Q2. What is your preparedness for working from the office?
  • Q3. What is your current cost to company (CTC) and what are your expected CTC expectations?
  • Q4. What is your reason for seeking a job change?
  • Q5. When are you able to start working?

I applied via Job Portal and was interviewed before Jun 2021. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. Company introduction and job profile
  • Q2. Basic introduction about self education and experience
  • Q3. Details of job description
  • Q4. How to handle the procurment
  • Q5. How do develop new system
  • Ans. 

    Developing a new system involves identifying requirements, designing, testing, and implementing the system.

    • Identify the requirements of the system

    • Design the system architecture and components

    • Test the system thoroughly to ensure it meets the requirements

    • Implement the system and monitor its performance

    • Continuously improve the system based on feedback and changing requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - please prepare your self to go any where in interview

Skills evaluated in this interview

Executive Interview Questions Asked at Other Companies

Q1. How will you start RS method Development for known drug product?
Q2. What is peak purity and how it is calculated in hplc?
Q3. Procedure of export and import.China as country and as manufactur ... read more
Q4. How to use excell and basics of advance excellent
Q5. 1 - Which biological indicator use in autoclave validation at the ... read more

Executive Interview Questions & Answers

user image Anonymous

posted on 24 Sep 2021

I applied via Campus Placement and was interviewed before Sep 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Why do you think you are fit for the job

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest, candid in your replies

Executive Jobs at Larsen & Toubro Limited

View all

Interview questions from similar companies

I appeared for an interview before Jul 2016.

Interview Questionnaire 

2 Questions

  • Q1. Non technical as a math Gk and about me
  • Q2. Introduction

Interview Preparation Tips

Round: Test
Experience: My test scores is totall 57 number
Total Questions: 70

Round: HR Interview
Experience: My test scores is totall 57 number
Tips: At this must required your Confident

I applied via Walk-in and was interviewed before Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tower cranes erection,batching plant maintenance and electrical safety
  • Q2. Ok normal

Interview Preparation Tips

Interview preparation tips for other job seekers - Normal not tough

I applied via LinkedIn and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical

Interview Preparation Tips

Interview preparation tips for other job seekers - Have technical knowledge. Learn the basic of your field.

Engineer Interview Questions & Answers

TCE user image Anonymous

posted on 25 Feb 2015

Interview Questionnaire 

1 Question

  • Q1. Questions were from bending moment and shear force diagrams;

Interview Preparation Tips

Round: Test
Experience: Technical (Structural engineering questions only) and aptitude test

Round: Technical Interview
Tips: Questions on Earthquake engineering, structural dynamics,Design of RC and steel structures can also be asked.

Round: HR Interview
Experience: HR interview is trivial if you are selected through technical interview.

General Tips: Technical/aptitude test and technical interview had maximum weightage. If you crack it the best way, you are in!
Skill Tips: CGPA does not help much. Internship, project etc. questions were not asked.
Skills: Aptitude skills, Technical skills, Designing skills
College Name: IIT MADRAS

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What are the common welding process?
  • Ans. 

    Common welding processes include MIG, TIG, Stick, and Flux-Cored welding.

    • MIG (Metal Inert Gas) welding uses a wire electrode and shielding gas to join metal.

    • TIG (Tungsten Inert Gas) welding uses a tungsten electrode and filler metal to join metal.

    • Stick welding uses a consumable electrode coated in flux to join metal.

    • Flux-Cored welding uses a wire electrode with a flux core to join metal.

    • Other common welding processes i...

  • Answered by AI
  • Q2. What are the tests conducted on welding joints?
  • Ans. 

    Tests conducted on welding joints

    • Visual inspection

    • Dye penetrant testing

    • Radiographic testing

    • Ultrasonic testing

    • Magnetic particle testing

    • Tensile testing

    • Bend testing

  • Answered by AI
  • Q3. What is submerged arc welding process?
  • Ans. 

    Submerged arc welding is a process where an arc is maintained between a consumable electrode and the workpiece under a blanket of granular flux.

    • The process is used for welding thick sections of steel.

    • The granular flux shields the weld from atmospheric contamination.

    • The consumable electrode is continuously fed into the weld pool.

    • The process is commonly used in shipbuilding, pipeline construction, and pressure vessel fab

  • Answered by AI
  • Q4. Procedure of rectification for defected welding joints?
  • Ans. 

    Defected welding joints can be rectified through a process of cutting, grinding, and rewelding.

    • Identify the type and extent of the defect

    • Cut out the defected portion of the joint

    • Grind the edges of the remaining joint to prepare for rewelding

    • Reweld the joint using appropriate welding techniques and materials

    • Perform non-destructive testing to ensure the quality of the repaired joint

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go for meil you can experience a great environment and learning platform

I applied via Walk-in and was interviewed before Aug 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Tell daily maintenance schedules of machineries
  • Ans. 

    Daily maintenance schedules of machineries

    • Check oil levels and top up if necessary

    • Inspect and clean filters

    • Check for any signs of wear and tear

    • Lubricate moving parts

    • Check for any leaks or unusual noises

    • Perform any necessary repairs or replacements

    • Keep a record of maintenance performed

  • Answered by AI
  • Q2. Tell how many types of oils uses in construction machinery
  • Ans. 

    Construction machinery uses various types of oils depending on their functions.

    • There are different types of oils used in construction machinery such as engine oil, hydraulic oil, gear oil, transmission oil, and brake oil.

    • Engine oil is used to lubricate the engine and prevent wear and tear.

    • Hydraulic oil is used to transfer power in hydraulic systems.

    • Gear oil is used to lubricate gears and bearings in gearboxes.

    • Transmiss...

  • Answered by AI
  • Q3. How to repair hydraulic pump?
  • Ans. 

    To repair a hydraulic pump, first identify the problem and then disassemble the pump to replace or repair the faulty parts.

    • Identify the problem by checking for leaks, unusual noises, or loss of pressure.

    • Disassemble the pump carefully, taking note of the order of parts and any seals or gaskets.

    • Inspect the parts for damage or wear, and replace any faulty components.

    • Reassemble the pump, making sure all parts are properly ...

  • Answered by AI
  • Q4. What is the reason of engine failure ?
  • Ans. 

    Engine failure can be caused by various factors such as overheating, lack of maintenance, wear and tear, and manufacturing defects.

    • Overheating due to lack of coolant or oil

    • Lack of maintenance such as not changing oil or air filters

    • Wear and tear of engine components such as pistons, bearings, and valves

    • Manufacturing defects such as faulty parts or poor assembly

    • Fuel contamination or incorrect fuel usage

    • Improper installat...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Tough

I applied via Company Website and was interviewed in Sep 2021. There were 3 interview rounds.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic information about civil engineering, diploma and CIVIL ENGINEERING BTech, minimum knowledge of projects and BULIDING AND HYDRAULIC IRRIGATION projects

Larsen & Toubro Limited Interview FAQs

How many rounds are there in Larsen & Toubro Limited Executive interview?
Larsen & Toubro Limited interview process usually has 1 rounds. The most common rounds in the Larsen & Toubro Limited interview process are One-on-one Round and HR.
How to prepare for Larsen & Toubro Limited Executive interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Larsen & Toubro Limited. The most common topics and skills that interviewers at Larsen & Toubro Limited expect are Agile, Javascript, MongoDB, Auditing and JQuery.
What are the top questions asked in Larsen & Toubro Limited Executive interview?

Some of the top questions asked at the Larsen & Toubro Limited Executive interview -

  1. how do develop new sys...read more
  2. Are you currently employed, and are you prepared to transition to the offered p...read more
  3. What is your current cost to company (CTC) and what are your expected CTC expec...read more

Tell us how to improve this page.

Larsen & Toubro Limited Executive Interview Process

based on 3 interviews

Interview experience

3.3
  
Average
View more
Larsen & Toubro Limited Executive Salary
based on 216 salaries
₹4.3 L/yr - ₹15 L/yr
107% more than the average Executive Salary in India
View more details

Larsen & Toubro Limited Executive Reviews and Ratings

based on 41 reviews

3.7/5

Rating in categories

3.8

Skill development

3.2

Work-life balance

3.5

Salary

4.2

Job security

3.5

Company culture

3.2

Promotions

3.2

Work satisfaction

Explore 41 Reviews and Ratings
Prospecting - Executive

Hyderabad / Secunderabad,

Pune

+1

3-7 Yrs

₹ 1.75-6.75 LPA

Explore more jobs
Assistant Manager
3.9k salaries
unlock blur

₹5 L/yr - ₹18.5 L/yr

Senior Engineer
3.5k salaries
unlock blur

₹4.5 L/yr - ₹12.5 L/yr

Engineer
1.2k salaries
unlock blur

₹1.6 L/yr - ₹9.3 L/yr

Manager
1.1k salaries
unlock blur

₹9.5 L/yr - ₹30 L/yr

Assistant Construction Manager
1k salaries
unlock blur

₹6 L/yr - ₹21.5 L/yr

Explore more salaries
Compare Larsen & Toubro Limited with

Tata Projects

4.2
Compare

Megha Engineering & Infrastructures

3.9
Compare

Shapoorji Pallonji Group

4.1
Compare

Kalpataru Projects International

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview