Add office photos
i
Filter interviews by
International Automotive Components Senior Design Engineer Interview Questions and Answers
International Automotive Components Senior Design Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Naukri.com and was interviewed before Aug 2023. There was 1 interview round.
(3 Questions)
- Q1. Which peoject you have worked on
- Ans.
I have worked on designing a solar-powered irrigation system for a rural community.
Researched solar panel efficiency and irrigation system requirements
Designed a system to efficiently pump water using solar energy
Implemented sensors for monitoring water levels and irrigation needs
Collaborated with local community for installation and testing
- Q2. What are the challenges you faced
- Ans.
Challenges faced include tight deadlines, complex design requirements, and communication issues.
Tight deadlines for project completion
Complex design requirements that required innovative solutions
Communication issues with team members or clients
Balancing multiple projects simultaneously
- Q3. What new things you learned
- Ans.
I learned new design software, improved communication skills, and gained knowledge in project management.
Learned how to use SolidWorks for 3D modeling
Enhanced communication skills through regular team meetings and client interactions
Acquired project management skills by leading a team in completing a design project
Interview Preparation Tips
Interviewer is well aware of products so be true to whatever you explain.
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Oct 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Rate yourself for power electronics circuit designing
- Ans.
I rate myself 8 out of 10 for power electronics circuit designing.
I have extensive experience in designing power electronics circuits for various applications.
I am proficient in using simulation tools like LTSpice and MATLAB for circuit analysis and design.
I have designed and implemented several power electronics circuits, including DC-DC converters, inverters, and motor drives.
I keep myself updated with the latest tre...
- Q2. Currently Which kind of work you are doing? Which technique you follow to solve if any problems occure in the team
- Ans.
I am currently working as a Sr. Engineer in design.
I am responsible for designing and developing new products.
I collaborate with cross-functional teams to gather requirements and ensure design feasibility.
I use various techniques like brainstorming, prototyping, and simulation to solve problems.
I encourage open communication and teamwork to address any issues that arise within the team.
I also conduct regular design rev...
Interview Preparation Tips
(1 Question)
- Q1. What is tolerance and basic tolerance
- Ans.
Tolerance refers to the allowable deviation from a specified dimension in engineering design.
Tolerance is the acceptable range of variation in a dimension or property of a part or product.
Basic tolerance is the general tolerance that is applied to all dimensions unless otherwise specified.
Tolerance helps ensure that parts fit together properly and function as intended.
Examples of tolerance include +/- 0.1mm for a machi...
First round is aptitude test all type of questions asked like verbal, reasoning and Technical
(2 Questions)
- Q1. Explain stress, strain curve diagram with example?
- Ans.
Stress-strain curve shows relationship between stress and strain in a material under tension.
Stress-strain curve is a graphical representation of how a material deforms under stress.
It typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.
Example: Steel has a high yield strength, so its stress-strain curve shows a steep initial slope.
Example: Rubber has a low yield stre...
- Q2. What is DOF? How many degrees of freedom from any object
- Ans.
DOF stands for Degrees of Freedom. It refers to the number of independent parameters that define the configuration of an object.
DOF is the number of ways a rigid body can move in 3D space.
For a rigid body in 3D space, there are 6 degrees of freedom - 3 translational and 3 rotational.
Examples of DOF include linear motion along x, y, z axes and rotational motion around x, y, z axes.
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. EPLAN P8 Macro creation?
- Q2. EPLAN version and forms generation?
- Ans.
EPLAN is a software used for electrical design engineering. It allows for easy generation of forms.
EPLAN is a popular software used for electrical design engineering
It allows for easy generation of forms such as bills of materials, wiring diagrams, and terminal diagrams
EPLAN also has a version control system to manage changes and revisions
The latest version of EPLAN is EPLAN Electric P8
EPLAN also offers integration wit...
Interview Preparation Tips
- EPLAN
- AutoCAD
Prepare for EPLAN macro and form creation.
I applied via Referral and was interviewed in Nov 2021. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Press tool Design basic questions.
- Q2. Catia press tool model tree.
- Q3. Draw progressive striplayout.
- Ans.
Progressive stripline layout is a type of transmission line layout used in high-frequency circuits.
Progressive stripline layout is used to reduce the size of transmission lines in high-frequency circuits.
It involves gradually increasing the width of the stripline as it approaches the load.
This helps to reduce the impedance mismatch and improve signal integrity.
The layout is commonly used in microwave and RF circuits.
Ex...
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed in Dec 2020. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Rubber properties and measuring parameters and devices.
- Ans.
Rubber properties can be measured using various parameters and devices.
Rubber properties include elasticity, tensile strength, hardness, and compression set.
Parameters used to measure rubber properties include stress, strain, and deformation.
Devices used to measure rubber properties include rheometers, durometers, and tensile testers.
Rubber properties can also be measured using thermal analysis and dynamic mechanical a...
- Q2. About work experience details and institutional projects.
- Q3. Technical questions and basics part of engineering.
Interview Preparation Tips
Try to give it answer of the questions which will asked by interviewer. This interview was technical one but was majorly a stress test. Mostly asked a question related to your designation and your qualifications. Interviewer check your knowledge and communication.
I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.
(2 Questions)
- Q1. They asks about the project?
- Q2. Other technical questions like GD&T,machining process,etc.
Interview Preparation Tips
(2 Questions)
- Q1. Seating regulations
- Q2. Safety standards
(2 Questions)
- Q1. Salary expectation
- Q2. When can you join
Selected
I applied via Walk-in and was interviewed in Dec 2023. There was 1 interview round.
(5 Questions)
- Q1. Part drawing 2D or 3D
- Ans.
2D is a flat picture while 3D is one that has depth.
- Q2. Sketcher 2d drawings
- Ans.
First of all we sketch 2d drawings after we assembly the complete object
- Q3. Assembly all part drawing
- Ans.
When 2D sketch complete, after we calling parts to make complete assembly.
- Q4. Generative Sheet metal
- Q5. Generative drafting
Interview Preparation Tips
- CATIA
- AutoCAD
International Automotive Components Interview FAQs
Tell us how to improve this page.
International Automotive Components Interviews By Designations
- International Automotive Components Tool Room Engineer Trainee Interview Questions
- International Automotive Components Accountant Interview Questions
- International Automotive Components Accounts Payable Associate Interview Questions
- International Automotive Components Analyst Interview Questions
- International Automotive Components Assistant Quality Engineer Interview Questions
- International Automotive Components Deputy Manager Interview Questions
- International Automotive Components Design Engineer Interview Questions
- International Automotive Components Helper Interview Questions
- Show more
Interview Questions for Popular Designations
- Design Engineer Interview Questions
- Mechanical Engg. Design Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
International Automotive Components Senior Design Engineer Reviews and Ratings
based on 5 reviews
Rating in categories
|
Design Engineer
137
salaries
|  ₹2.4 L/yr - ₹8 L/yr |
|
Assistant Manager
61
salaries
| ₹6.4 L/yr - ₹18 L/yr |
|
Senior Design Engineer
54
salaries
| ₹5 L/yr - ₹10.5 L/yr |
|
Senior Engineer
53
salaries
| ₹5 L/yr - ₹10 L/yr |
|
Quality Inspector
49
salaries
| ₹1.4 L/yr - ₹2.5 L/yr |
Samvardhana Motherson Group
Bharat Forge
Varroc Group
Sundaram Clayton
- Home >
- Interviews >
- International Automotive Components Interview Questions >
- International Automotive Components Senior Design Engineer Interview Questions
