Add office photos
Engaged Employer
i
This company page is being actively managed by
GGS Engineering Services Team. If you also belong to the team, you
can get access from
here
GGS Engineering Services
Compare
Filter interviews by
GGS Engineering Services Senior Design Engineer Interview Questions, Process, and Tips
Updated
15 Aug 2024
Top GGS Engineering Services Senior Design Engineer Interview Questions and Answers
- Q1. How to decide sheetmetal bracket or casting is required.
- Q2. Material selection and which material used in current working?
- Q3. Modelling & Detailing of large sheet metal
2 GGS Engineering Services Senior Design Engineer Interview Experiences
11 questions found
Sort by:
Popular
Anonymous
Interview experience
Good
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Naukri.com and was interviewed before Aug 2023.
1 Interview Round
1
Technical Round (6 Questions)
- Q1. What is GD & T and why it is required? View Answers (1)
- Q2. What is difference between circularity and runout View Answers (1)
- Q3. Design an L bracket with 2 mounting holes? View Answers (1)
- Q4. Material selection and which material used in current working? View Answers (1)
- Q5. What is DFMEA explain steps of DFMEA? View Answers (1)
- Q6. HOw many symbols in GD & T? View Answers (1)
Interview Preparation Tips
Interview preparation tips for other job seekers - I got interviewed in July 2022.
There was 2 round
First round with GGS manager
1. GD & T
2. Sheet Metal Design aspects
3. Regarding current work experience
Second round was with Johndeere manager
1. Design rules for sheetmetal and Plastics
2. Difference between runout and cylindericity
3. GD & T Symbols
4. Tolerance stackup
5. What is DFMEA
6. Question regarding Creo Modeling.
There was 2 round
First round with GGS manager
1. GD & T
2. Sheet Metal Design aspects
3. Regarding current work experience
Second round was with Johndeere manager
1. Design rules for sheetmetal and Plastics
2. Difference between runout and cylindericity
3. GD & T Symbols
4. Tolerance stackup
5. What is DFMEA
6. Question regarding Creo Modeling.
Skills evaluated in this interview
I applied via Approached by Company and was interviewed before Oct 2021.
4 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
2
HR Round (1 Question)
- Q1. General Brief of profile & requirement
Skills View Answers (1)
3
Technical Round (3 Questions)
- Q1. Vehicle Engineering, Sheetmetal, structure, casting type & design parameters, GD&T, Welding standards, material standard, sheetmetal manufacturing process View Answers (1)
- Q2. Casting design parameters View Answers (1)
- Q3. How to decide sheetmetal bracket or casting is required. View Answers (2)
4
Design Test Round (1 Question)
- Q1. Modelling & Detailing of large sheet metal View Answers (2)
Interview Preparation Tips
Topics to prepare for GGS Engineering Services Senior Design Engineer interview:
- Gd&t
- Sheet Metal
- Creo
- Mechanical Engineering
- Casting process
- Strength of materials
- Welding Techniques
Get interview-ready with top interview questions
Interview questions from similar companies
Interview experience
Excellent
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Recruitment Consulltant and was interviewed in Apr 2024.
1 Interview Round
1
Technical Round (1 Question)
- Q1. What are Duplex stainless steels applications? View Answers (2)
I applied via Recruitment Consultant and was interviewed in Jun 2021.
1 Interview Round
Interview Questions
- Q1. Technical Quaetion related to IEC,IEEE, SIZING CALC
Add Answer
Interview Preparation Tips
Interview preparation tips for other job seekers - Be prepared and dress well be simple
Interview experience
Bad
Difficulty level
-
Duration
-
Result
-
3 Interview Rounds
1
Aptitude Test Round
Aptitude test was not prompt
2
Technical Round (2 Questions)
- Q1. They mentioned personal interview for technical round Add Answer
- Q2. They took technical interview and then gave detailing work. Add Answer
3
HR Round (1 Question)
- Q1. Hr is very poor Add Answer
Interview Preparation Tips
Interview preparation tips for other job seekers - They hire engineers for detailing work. Please note they do not have engineering work. Not recommended for freshers or ani degree holder. They take Workplace harassment casually. Poor HR department who is biased. They do not take safety as a priority. Very very very poor company. Don’t waste your valuable time and talent in this company.
Interview experience
Excellent
Difficulty level
-
Duration
-
Result
-
2 Interview Rounds
1
Technical Round (17 Questions)
- Q1. What is load density? View Answers (1)
- Q2. What will be short circuit current form 1000kVA TF (5% Z) on a panel and determine it’s CB Fault current rating? Which IEC Standard is used? View Answers (1)
- Q3. What will be cable size & CB rating for 50KW motor at 30m distance from panel? View Answers (3)
- Q4. What is CRI? (Lighting design) View Answers (1)
- Q5. What is UGR? (Lighting design) View Answers (1)
- Q6. What is Uniformity factor? (Lighting design) View Answers (1)
- Q7. What is maintenance factor? (Lighting design) View Answers (1)
- Q8. What are reflection index in rooms? View Answers (1)
- Q9. How to design exit sign lighting in corridor or pathways? (Lighting design) View Answers (1)
- Q10. How to design earthing? View Answers (1)
- Q11. What earth loop impedance? View Answers (1)
- Q12. How to design transformer room? View Answers (1)
- Q13. How to size cable tray? View Answers (1)
- Q14. How much spacing required between smoke detectors? View Answers (1)
- Q15. How clearance maintained with cable tray and wet service pipe ? View Answers (1)
- Q16. How to design CCTV system ? which cable used for CCTV? View Answers (1)
- Q17. What is Harmonics in transformer? What are it’s impacts on system and how to reduce it? View Answers (1)
2
ToolTest Round (2 Questions)
- Q1. Revit tool test: -Link Arch file. -Copy monitor all levels. -Create central file. -Create filter for power, lighting & cable tray. -Create workset for power, li...read more Add Answer
- Q2. Post tool test questions. 1. What is Type & instance parameter? 2. What is view template & revit template? 3. Template file format? 4. How to do electrical dist...read more Add Answer
Skills evaluated in this interview
Interview experience
Average
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Not Selected
I applied via Campus Placement and was interviewed in Aug 2024.
1 Interview Round
1
Aptitude Test Round
Question where asked from trains,permutation and some grammer
Interview Preparation Tips
Topics to prepare for Wood Group Design Engineer interview:
- Transformers
- basic aptitude
Interview experience
Good
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Approached by Company and was interviewed in Apr 2024.
1 Interview Round
1
HR Round (1 Question)
- Q1. What you do in your last company Add Answer
Interview Preparation Tips
Interview preparation tips for other job seekers - Be confident in your interview time.
sree maheshwaran
Interview experience
Excellent
Difficulty level
Moderate
Duration
Less than 2 weeks
Result
Selected
I applied via Referral and was interviewed in Nov 2023.
1 Interview Round
1
Technical Round (1 Question)
- Q1. How to calculate pipe wall thickness View Answers (2)
Interview experience
Excellent
Difficulty level
-
Duration
-
Result
-
3 Interview Rounds
1
Resume Shortlist Round
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
2
Aptitude Test Round
QA Reasoning English
3
Technical Round (1 Question)
- Q1. Qualification specific questions Add Answer
GGS Engineering Services Interview FAQs
How many rounds are there in GGS Engineering Services Senior Design Engineer interview?
GGS Engineering Services interview process usually has 2-3 rounds. The most common rounds in the GGS Engineering Services interview process are Technical, Resume Shortlist and HR.
What are the top questions asked in GGS Engineering Services Senior Design Engineer interview?
Tell us how to improve this page.
GGS Engineering Services Interviews By Designations
- GGS Engineering Services Design Engineer Interview Questions
- GGS Engineering Services Senior Design Engineer Interview Questions
- GGS Engineering Services Assembly Engineer Interview Questions
- GGS Engineering Services Design Team Member Interview Questions
- GGS Engineering Services Fixture Design Engineer Interview Questions
- GGS Engineering Services Junior Design Engineer Interview Questions
- GGS Engineering Services Lead Mechanical Engineer Interview Questions
- GGS Engineering Services Senior Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Design Engineer Interview Questions
- Mechanical Engg. Design Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
People are getting interviews through
based on 2 GGS Engineering Services interviews
Job Portal
50%
50% candidates got the interview through other sources.
Moderate
Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates
Senior Design Engineer Interview Questions from Similar Companies
18%
less
than the average Senior Design Engineer Salary in India
View more details
GGS Engineering Services Senior Design Engineer Reviews and Ratings
based on 34 reviews
Rating in categories
|
Design Engineer
296
salaries
|  ₹2 L/yr - ₹8 L/yr |
|
Senior Design Engineer
128
salaries
| ₹4.8 L/yr - ₹11 L/yr |
|
Junior Design Engineer
58
salaries
| ₹2.5 L/yr - ₹5 L/yr |
|
Senior Engineer
54
salaries
| ₹4.6 L/yr - ₹10.6 L/yr |
|
Lead Engineer
53
salaries
| ₹6.3 L/yr - ₹13.1 L/yr |
Explore more salaries
Compare GGS Engineering Services with
TCS
Compare
Infosys
Compare
Wipro
Compare
Tech Mahindra
Compare
Calculate your in-hand salary
Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and
get your in-hand salary
Did you find this page helpful?
Yes No
- Home >
- Interviews >
- GGS Engineering Services Interview Questions >
- GGS Engineering Services Senior Design Engineer Interview Questions
Share an Interview