AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Indo Autotech Senior Engineer Interview Questions and Answers
Indo Autotech Senior Engineer Interview Experiences
2 interviews found
Anonymous
Selected
I applied via Referral and was interviewed before Jul 2023. There was 1 interview round.
(2 Questions)
- Q1. Why you have to change your current organization
- Q2. What are your strengths
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Why you want to change?
- Q2. Which liquid is used in Welding penetration test?
- Ans.
The liquid used in welding penetration test is dye penetrant.
Dye penetrant is a liquid that is applied to the surface of the weld.
It seeps into any cracks or defects in the weld.
After the excess penetrant is wiped away, a developer is applied to make the defects visible.
This test is used to check the quality of the weld and ensure it is free from defects.
- Q3. Which gases used in welding?
- Ans.
Gases commonly used in welding are argon, helium, carbon dioxide, and oxygen.
Argon is used for TIG welding of non-ferrous metals.
Helium is used for TIG welding of thick materials.
Carbon dioxide is used for MIG welding of steel.
Oxygen is used for oxy-fuel welding and cutting.
Gas mixtures like argon and carbon dioxide are also used for MIG welding.
- Q4. What voltage and current used in welding?
- Ans.
The voltage and current used in welding depend on the type of welding process and the materials being welded.
For example, in shielded metal arc welding (SMAW), the voltage typically ranges from 20-30 volts and the current ranges from 50-200 amps.
In gas metal arc welding (GMAW), the voltage ranges from 15-40 volts and the current ranges from 50-350 amps.
The voltage and current settings also depend on the thickness of th...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Deepak Rawat
Selected
I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.
(5 Questions)
- Q1. 7qc tools & describe it as per example
- Ans.
7QC tools are a set of quality control tools used for process improvement and problem-solving.
Check sheet: Used to collect and analyze data, such as tallying defects in a manufacturing process.
Pareto chart: Helps identify the most significant factors contributing to a problem, based on the 80/20 rule.
Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.
Histogram: Repre...
- Q2. Difference between QA & QC
- Ans.
QA focuses on preventing defects in the process, while QC focuses on identifying defects in the product.
QA is process oriented, focusing on preventing defects by improving processes and procedures.
QC is product oriented, focusing on identifying defects through testing and inspection.
QA involves activities like reviews, audits, and process improvements.
QC involves activities like testing, inspections, and quality contro...
- Q3. Define of FMEA TYPE
- Ans.
FMEA stands for Failure Modes and Effects Analysis, a systematic method for identifying and preventing potential failures in a system.
FMEA is a structured approach to identifying and prioritizing potential failure modes in a system.
It involves analyzing the potential effects of these failures and developing mitigation strategies.
FMEA helps in improving the reliability, safety, and quality of a system or process.
There a...
- Q4. Process & product audit type of poka yoke
- Ans.
Process & product audit type of poka yoke ensures errors are prevented during audits.
Poka yoke in process audit involves using checklists to ensure all steps are followed correctly
Poka yoke in product audit involves using sensors to detect defects before they occur
Examples include using color-coded labels to prevent mix-ups in audits
- Q5. 8D Capa, 5S, pervios company job profile and DWM
(1 Question)
- Q1. G codes and M codes
Senior Engineer Interview Questions & Answers
Motherson Automotive Technologies and Engineering
Shivam Kumar Sharma
posted on 1 Apr 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 2 interview rounds.
(3 Questions)
- Q1. How to handle if random problem facing on existing parameters
- Ans.
Identify root cause, analyze impact, propose solutions, test solutions, implement changes
Identify the root cause of the random problem by analyzing existing parameters
Analyze the impact of the problem on the system or project
Propose potential solutions to address the random problem
Test the proposed solutions to ensure effectiveness
Implement changes based on the tested solutions
Monitor the system to ensure the random pr
- Q2. Previous experience and achievements regarding your responsibility
- Q3. In your past company customer complaint how you provide action plan
When sudden rejection goes higher how you handle situation
Interview Preparation Tips
How you meet related to QCD
Skills evaluated in this interview
I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.
(2 Questions)
- Q1. Not any specific
- Q2. Knowledge About gear
Selected
(1 Question)
- Q1. Write NC program PFMEA details and knowledge of depth to proportion GD&T Past company experience and technical knowledge, cast reduction, process knowledge
(1 Question)
- Q1. Technical round 2. Interviewed by ME head. Capacity calculation,line balancing,PPAP,APQP,MSD,machine selaction, process selection.
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jun 2023. There was 1 interview round.
(2 Questions)
- Q1. Tell me about yourself?
- Q2. Parameters of costing?
- Ans.
Parameters of costing refer to the factors that influence the cost of a product or service.
Parameters can include materials, labor, overhead, and profit margin.
Other factors like transportation costs, taxes, and market demand can also impact costing.
Understanding and analyzing these parameters is crucial for accurate pricing and cost control.
For example, in manufacturing, the cost of raw materials and labor are key par
Interview Preparation Tips
Pankaj Kumar
I applied via Walk-in and was interviewed in Jul 2023. There were 2 interview rounds.
(2 Questions)
- Q1. 5 core tools, Vsa mace, IATF 16949
- Q2. 5 core tool, 7 qc tool, IATF 16949
Interview Preparation Tips
(2 Questions)
- Q1. Why you want to join Bosch? Where you look yourself in 5 years? Ready to work in shifts? What improvement project you did? Challenges facing in your current employer
- Ans.
I want to join Bosch because of its reputation for innovation and excellence. In 5 years, I see myself in a leadership role. I am ready to work in shifts. I have successfully completed an improvement project in my current role. The challenges I face in my current employer include outdated technology and lack of collaboration.
Joining Bosch for its reputation for innovation and excellence
Aspiring to be in a leadership ro...
- Q2. What is your current CTC
Interview Preparation Tips
Indo Autotech Interview FAQs
Tell us how to improve this page.
Indo Autotech Interviews By Designations
- Indo Autotech Production Engineer Interview Questions
- Indo Autotech Engineer Interview Questions
- Indo Autotech Graduate Engineer Interview Questions
- Indo Autotech Quality Engineer Interview Questions
- Indo Autotech Senior Engineer Interview Questions
- Indo Autotech Software Developer Interview Questions
- Indo Autotech Accounts & Finance Manager Interview Questions
- Indo Autotech Assistant Manager Interview Questions
- Show more
Indo Autotech Senior Engineer Interview Process
based on 6 interviews
Interview experience
Senior Engineer Interview Questions from Similar Companies
Fast track your campus placements
Indo Autotech Senior Engineer Reviews and Ratings
based on 43 reviews
Rating in categories
|
Senior Engineer
217
salaries
|  ₹3.2 L/yr - ₹7.5 L/yr |
|
Engineer
188
salaries
| ₹2.1 L/yr - ₹6 L/yr |
|
Assistant Manager
159
salaries
| ₹4.4 L/yr - ₹10.1 L/yr |
|
Production Engineer
124
salaries
| ₹2.2 L/yr - ₹5.4 L/yr |
|
Quality Engineer
102
salaries
| ₹1.6 L/yr - ₹5 L/yr |
Tata Motors
Mahindra & Mahindra
Maruti Suzuki
Bharat Forge
- Home >
- Interviews >
- Indo Autotech Interview Questions >
- Indo Autotech Senior Engineer Interview Questions
