Upload Button Icon Add office photos

Indo Autotech

Compare button icon Compare button icon Compare

Filter interviews by

Indo Autotech Engineer Interview Questions and Answers

Updated 22 Jan 2023

Indo Autotech Engineer Interview Experiences

3 interviews found

Engineer Interview Questions & Answers

user image Anonymous

posted on 22 Jan 2023

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic informational questions
Round 3 - Technical 

(3 Questions)

  • Q1. If Customer complaint reached to supplier then what action will be taken......?
  • Ans. 

    The supplier should investigate the complaint and take appropriate corrective actions.

    • The supplier should acknowledge the complaint and gather all necessary information.

    • They should investigate the root cause of the complaint and take corrective actions to prevent it from happening again.

    • The supplier should communicate the findings and actions taken to the customer.

    • If necessary, the supplier should provide compensation ...

  • Answered by AI
  • Q2. How to Conduct Manufacturing Audit, System Audit Which Documents shall be use during Audit.
  • Ans. 

    Manufacturing and system audits require proper planning and documentation.

    • Plan the audit and identify the scope and objectives.

    • Prepare a checklist of documents to be reviewed during the audit.

    • Conduct the audit and document the findings.

    • Prepare an audit report and share it with the relevant stakeholders.

    • Documents to be reviewed may include quality manuals, procedures, work instructions, records, etc.

  • Answered by AI
  • Q3. ISO/IATF Clauses 8D 5W1H 7QC Tool PPAP &There Elements APQP FMEA SPC MSA CSR How to calculate welding Parameters

Interview Preparation Tips

Interview preparation tips for other job seekers - If your are going for Interview that time be Confidence.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Last experience Salary requirement 5s Kaizen skill
Round 3 - Technical 

(1 Question)

  • Q1. Robo skill OEE Best achievement Cost saving How to calculate mendays MIS Report Basics of SAP welding parameter Welding defects 7QC tools SPC KAIZEN Robo programming
  • Ans. 

    The interview questions cover topics such as robo skill, OEE, cost saving, MIS report, SAP basics, welding parameters and defects, 7QC tools, SPC, KAIZEN, and robo programming.

    • Robo skill: knowledge of programming and operating robots

    • OEE: Overall Equipment Effectiveness, a measure of manufacturing productivity

    • Cost saving: identifying and implementing cost-saving measures

    • MIS report: Management Information System report, ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls be clear with your answers
Short and to the point answer required
Learn about SAP production T Codes
Learn about boring machine.
Welding parameters as per BOP and RM specifications

Engineer Interview Questions Asked at Other Companies

asked in Eaton
Q1. ❖ If a team member is unable to carry out his work, he is doing i ... read more
Q2. What is inheritance? Show me by a code that shouldn't be a pseudo ... read more
asked in Qualcomm
Q3. What is Min-Cut placement algorithm? Given some block sizes, use ... read more
Q4. What is neutonian fluid ? , Stages of fracture, working of engine ... read more
Q5. What is normalization? What do you mean by 1NF, 2NF, 3NF, 4NF?

I applied via Naukri.com and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basically your related questions.like:- Robot, production,cycle time, SPR, Your last company Kaizen etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare your work related question.

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Mold related
  • Q2. Suitable answers

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice

I applied via Campus Placement and was interviewed in Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Personal
  • Q2. Technical

Interview Preparation Tips

Interview preparation tips for other job seekers - Just relax & if u know the answers give it if u don't then politely say no.
Make things simple.

Interview Questionnaire 

3 Questions

  • Q1. What is MSA SPC and 7qc tools?
  • Ans. 

    MSA SPC and 7qc tools are quality control methods used in manufacturing and engineering.

    • MSA (Measurement System Analysis) is used to evaluate the measurement system's ability to provide accurate and reliable data.

    • SPC (Statistical Process Control) is used to monitor and control a process to ensure it operates within its limits and produces consistent results.

    • 7qc tools (Seven Quality Control Tools) are a set of technique...

  • Answered by AI
  • Q2. Sheet metal process ?
  • Ans. 

    Sheet metal process involves cutting, bending, and shaping metal sheets to create various products.

    • Cutting: using tools like shears, lasers, or plasma cutters to cut the metal sheet into the desired shape

    • Bending: using press brakes or rollers to bend the metal sheet into the desired shape

    • Shaping: using tools like hammers or punches to create specific features or designs on the metal sheet

    • Assembly: joining multiple meta...

  • Answered by AI
  • Q3. Defects in sheet metal?
  • Ans. 

    Defects in sheet metal can occur due to various reasons.

    • Warping

    • Cracking

    • Lack of uniformity

    • Corrosion

    • Scratches

    • Dents

    • Blisters

    • Porosity

  • Answered by AI

I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Question's like about transformers,DG, Compressor,HT< breaker's

Interview Preparation Tips

Interview preparation tips for other job seekers - Well management culture and past 6 months my working experience is good.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Say me about your past experience
  • Ans. 

    I have 5 years of experience working as a mechanical engineer in the automotive industry.

    • Designed and implemented new components for vehicle engines

    • Performed stress analysis and simulations to ensure product durability

    • Collaborated with cross-functional teams to troubleshoot and resolve technical issues

    • Managed projects from concept to production, meeting strict deadlines

  • Answered by AI
  • Q2. Eloborate the projects that you have worked on
  • Ans. 

    I have worked on various projects including designing a new software system for a manufacturing company and implementing a renewable energy solution for a residential building.

    • Designed a new software system for a manufacturing company to streamline production processes

    • Implemented a renewable energy solution for a residential building to reduce energy costs and environmental impact

    • Collaborated with a team of engineers t...

  • Answered by AI

I applied via Campus Placement and was interviewed before Apr 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Try to all the interview very fastly

Interview Preparation Tips

Interview preparation tips for other job seekers - My advice to all of the candidates ,whenever they R going for a interview they are must be analysis about that company & don't be nervous & fluently asked The question either that question is subject topics or general type of questions such as ur families ,hobbies & ur activities & also ur passion & most important thing is that always perform all things in a disciplinary manner & don't be stop in that question which one u don't know if u don't know fluently ask I don't know & another important thing was try to choose a proper language where u comfortably answers all the questions in a sequence manner & before ur interview u mustly say that time either morning /night/evening you say the greeting such as gd mng sir &lastly you say thank u sir that's all.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Core Technical and practical skills
  • Q2. Brief about yourself
Round 3 - HR 

(2 Questions)

  • Q1. Ambition related resume relevant question
  • Q2. Previous experience, tell me about yourself

Indo Autotech Interview FAQs

How many rounds are there in Indo Autotech Engineer interview?
Indo Autotech interview process usually has 3 rounds. The most common rounds in the Indo Autotech interview process are Technical, Resume Shortlist and HR.
What are the top questions asked in Indo Autotech Engineer interview?

Some of the top questions asked at the Indo Autotech Engineer interview -

  1. If Customer complaint reached to supplier then what action will be taken.......read more
  2. Robo skill OEE Best achievement Cost saving How to calculate mendays MIS Report...read more
  3. How to Conduct Manufacturing Audit, System Audit Which Documents shall be use ...read more

Tell us how to improve this page.

Indo Autotech Engineer Interview Process

based on 3 interviews

1 Interview rounds

  • HR Round
View more
Indo Autotech Engineer Salary
based on 162 salaries
₹2.1 L/yr - ₹6 L/yr
26% less than the average Engineer Salary in India
View more details

Indo Autotech Engineer Reviews and Ratings

based on 36 reviews

3.9/5

Rating in categories

3.7

Skill development

3.5

Work-life balance

3.5

Salary

3.3

Job security

3.4

Company culture

3.4

Promotions

3.4

Work satisfaction

Explore 36 Reviews and Ratings
Senior Engineer
213 salaries
unlock blur

₹3.2 L/yr - ₹8.5 L/yr

Assistant Manager
168 salaries
unlock blur

₹4.4 L/yr - ₹10.6 L/yr

Engineer
162 salaries
unlock blur

₹2.1 L/yr - ₹6 L/yr

Production Engineer
125 salaries
unlock blur

₹2.3 L/yr - ₹5.4 L/yr

Quality Engineer
106 salaries
unlock blur

₹1.8 L/yr - ₹5 L/yr

Explore more salaries
Compare Indo Autotech with

Delphi TVS

3.9
Compare

Motherson Automotive Technologies and Engineering

3.8
Compare

Belrise Industries

3.7
Compare

Krishna Maruti

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview