Filter interviews by
I applied via Approached by Company and was interviewed in Apr 2024. There were 2 interview rounds.
I have over 10 years of experience in geotechnical engineering, working on various projects including foundation design, slope stability analysis, and ground improvement techniques.
Managed geotechnical investigations for large-scale infrastructure projects
Performed foundation design calculations for high-rise buildings
Conducted slope stability analysis for highway embankments
Implemented ground improvement techniques su...
Liquefaction is a phenomenon where soil loses its strength and stiffness due to increased pore water pressure during an earthquake.
Liquefaction occurs when loosely packed, water-saturated sediments lose their strength and behave like a liquid.
It can lead to ground settlement, tilting of buildings, and even landslides.
Common in areas with loose, sandy soils, such as coastal regions or river deltas.
Examples include the 1...
Pile foundations are deep foundations that transfer loads to deeper, more competent soil or rock strata, while shallow foundations transfer loads to the near-surface soils.
Pile foundations are used when the soil at shallow depths is not capable of supporting the structure's load.
Shallow foundations are typically used for smaller structures with light loads and where the soil is strong enough to support the load.
Pile fo...
I applied via Campus Placement
Questions related to Core subjects
Star delta circuits symbols represent the connections used in motor control circuits.
Star symbol (Y) represents the connection of three windings in a star configuration
Delta symbol (Δ) represents the connection of three windings in a delta configuration
The star-delta starter is a common application of these symbols in motor control circuits
posted on 12 Nov 2024
The pH value of bentonite typically ranges from 8 to 10.
Bentonite is a clay material commonly used in construction and engineering projects.
The pH value of bentonite can vary depending on its source and composition.
A pH value of 7 is considered neutral, so bentonite is slightly alkaline.
The pH value of bentonite is important in determining its suitability for various applications.
FE500 is a grade of steel used in construction, indicating its yield strength in megapascals.
FE500 is a designation for a type of steel reinforcement used in construction
The 'FE' stands for 'iron', while '500' indicates the minimum yield strength in megapascals
FE500 steel is commonly used in reinforced concrete structures for its high strength and durability
posted on 14 Sep 2024
I applied via LinkedIn and was interviewed in Jun 2024. There were 3 interview rounds.
Paper work Formalities
I applied via Campus Placement and was interviewed in Aug 2024. There was 1 interview round.
Question where asked from trains,permutation and some grammer
I applied via Naukri.com and was interviewed in Jun 2024. There were 2 interview rounds.
Patch load on towers refers to the additional weight or load that is applied to a tower structure to strengthen or modify its capacity.
Patch load can be applied to towers to increase their capacity to withstand wind, seismic, or other loads.
Patch load can also be used to redistribute loads on a tower to prevent structural failures.
Examples of patch loads include adding steel plates or braces to a tower structure to inc...
Codes on towers refer to the specific design and construction standards that must be followed for safety and structural integrity.
Codes on towers are regulations set by organizations like ANSI/TIA and ASCE that dictate the design, construction, and maintenance of towers.
These codes cover aspects such as materials used, structural design, wind loading, and safety factors.
For example, ANSI/TIA-222-G specifies the require...
Yes, I have extensive experience with basements and below ground structures.
I have designed and analyzed numerous basements for residential and commercial buildings.
I am familiar with waterproofing techniques and soil mechanics related to below ground structures.
I have experience with retaining walls, foundations, and underground parking structures.
I have worked on projects involving deep excavations and shoring system...
posted on 29 Aug 2024
I applied via Naukri.com
Technical questions about the Revit and MEP
I applied via Approached by Company and was interviewed in Apr 2024. There were 2 interview rounds.
Piping Designer
53
salaries
| ₹5 L/yr - ₹15.2 L/yr |
Piping Engineer
16
salaries
| ₹8.6 L/yr - ₹20 L/yr |
Structural Engineer
14
salaries
| ₹6.6 L/yr - ₹25.5 L/yr |
Electrical Engineer
14
salaries
| ₹8 L/yr - ₹14 L/yr |
Civil Structural Engineer
13
salaries
| ₹6.5 L/yr - ₹16.5 L/yr |
L&T Technology Services
TCS
Wipro
Infosys