Filter interviews by
The pH value of bentonite typically ranges from 8 to 10.
Bentonite is a clay material commonly used in construction and engineering projects.
The pH value of bentonite can vary depending on its source and composition.
A pH value of 7 is considered neutral, so bentonite is slightly alkaline.
The pH value of bentonite is important in determining its suitability for various applications.
FE500 is a grade of steel used in construction, indicating its yield strength in megapascals.
FE500 is a designation for a type of steel reinforcement used in construction
The 'FE' stands for 'iron', while '500' indicates the minimum yield strength in megapascals
FE500 steel is commonly used in reinforced concrete structures for its high strength and durability
I applied via Walk-in and was interviewed before Oct 2022. There were 3 interview rounds.
Pile foundations are constructed by driving or drilling vertical columns of concrete, steel, or wood into the ground to support a structure.
Determine the type of pile foundation needed based on soil conditions and load requirements
Prepare the site by clearing the area and marking the locations for the piles
Drive or drill the piles into the ground using specialized equipment such as pile drivers or augers
Ensure the pile...
The time needed to complete a structure depends on various factors such as size, complexity, materials, and workforce.
The duration to complete a structure can range from a few days for small projects to several months for large and complex structures.
Factors like weather conditions, availability of materials, and workforce efficiency also impact the timeline.
For example, a small residential house may take around 3-6 mo...
M-30 grade concrete is a type of concrete with a compressive strength of 30 megapascals after 28 days of curing.
M-30 grade concrete is a mix of concrete with a specified compressive strength of 30 megapascals after 28 days.
It is commonly used in construction for structural elements like beams, columns, and slabs.
The mix design for M-30 grade concrete typically includes a combination of cement, sand, aggregates, and wat...
I applied via Naukri.com and was interviewed in Sep 2020. There were 3 interview rounds.
The amount of cement used for making 1m³ of concrete varies depending on the desired strength and type of concrete.
The cement content typically ranges from 300 to 400 kg/m³ for general-purpose concrete.
For high-strength concrete, the cement content can be as high as 500 kg/m³ or more.
The water-cement ratio also affects the amount of cement required.
Admixtures and additives may be used to modify the properties of the co...
The amount of steel used for 1m³ concreting varies depending on the type of concrete and the structural requirements.
The steel used in concrete is typically in the form of reinforcing bars (rebar) or welded wire mesh.
The amount of steel required for 1m³ of concrete depends on the structural requirements and the type of concrete being used.
For example, a standard reinforced concrete slab may require 70-100 kg of steel p...
I applied via Naukri.com and was interviewed in Nov 2020. There were 4 interview rounds.
Megha Engineering & Infrastructures interview questions for designations
Top trending discussions
I applied via Referral and was interviewed before Jan 2021. There were 5 interview rounds.
Glass is a solid, transparent material made by heating a mixture of silica and other materials.
Glass is a non-crystalline, amorphous solid
It is made by heating a mixture of silica, soda ash, and lime
It can be molded into various shapes and sizes
It is used in windows, mirrors, lenses, and containers
Different types of glass include tempered, laminated, and stained glass
Graphene is a thin layer of pure carbon arranged in a hexagonal lattice.
It is the thinnest material known to man
It is a good conductor of electricity and heat
It is incredibly strong and flexible
It has potential applications in electronics, energy, and medicine
posted on 1 Jun 2021
I applied via Walk-in and was interviewed in Feb 2021. There were 3 interview rounds.
I applied via Recruitment Consultant and was interviewed in Sep 2019. There were 3 interview rounds.
posted on 18 Nov 2020
AIDL stands for Android Interface Definition Language, used for inter-process communication in Android.
AIDL is used to define the interface between client and service in Android.
It allows communication between different processes in Android.
AIDL is used to pass complex data types between processes.
AIDL is similar to Remote Procedure Call (RPC) in other programming languages.
Example: AIDL is used in Android to implement...
Hash set and hash map are data structures used to store key-value pairs for efficient retrieval.
Hash set stores unique values without any specific order.
Hash map stores key-value pairs and allows fast retrieval of values based on keys.
Both use hashing to map keys to their corresponding values.
In Java, HashSet and HashMap are implementations of these data structures.
based on 2 interviews
2 Interview rounds
based on 25 reviews
Rating in categories
Engineer
865
salaries
| ₹2.2 L/yr - ₹7 L/yr |
Senior Engineer
841
salaries
| ₹3.2 L/yr - ₹9.6 L/yr |
Associate Manager
505
salaries
| ₹4.8 L/yr - ₹15.8 L/yr |
Mechanical Engineer
388
salaries
| ₹2.1 L/yr - ₹7.3 L/yr |
Civil Engineer
343
salaries
| ₹2.2 L/yr - ₹7.6 L/yr |
Larsen & Toubro Limited
Shapoorji Pallonji Group
Alstom Transportation
Tata Technologies