Filter interviews by
I applied via Walk-in and was interviewed before May 2021. There were 2 interview rounds.
Interview questions for Structural Engineer
For irregular shape, find volume and multiply by unit weight to get weight. Divide moment of each part by total weight to get COG.
To calculate force required for COG shift, use moment equation. Sum of moments about any point should be equal to zero.
For SFD and BMD, use equations of equilibrium and moment. Draw free body diagram to show all forces acting on the portal.
Understan...
Barge and lifting analysis involves determining the support conditions and lifting factors for equipment on a barge.
Barge and lifting analysis is used to ensure that equipment on a barge is properly supported and can be safely lifted.
The procedure involves analyzing the support conditions of the barge and the equipment, as well as determining the lifting factors required to safely lift the equipment.
Various factors mus...
I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.
Dynamic and static analysis of structures and foundations is essential for ensuring their stability and safety.
Dynamic analysis involves studying the behavior of structures under dynamic loads such as earthquakes or wind.
Static analysis focuses on the response of structures to static loads like gravity or applied forces.
Both analyses help in determining the structural integrity, performance, and design optimization.
Dyn...
Yes, I have experience using software such as ETABS, SAP2000, and SAFE. I have also worked with SACS.
I have used ETABS for the design of high-rise buildings
I have used SAP2000 for the analysis of complex structures
I have used SAFE for the design of foundation systems
I have experience working with SACS for offshore structures
Top trending discussions
I applied via campus placement at Birla Institute of Technology and Science (BITS), Pilani and was interviewed in Jul 2024. There were 3 interview rounds.
Social media connecting people
Sfd and bmd diagrams show the variation of shear force and bending moment along the length of a structural member.
SFD (Shear Force Diagram) shows the variation of shear force along the length of a beam or structural member.
BMD (Bending Moment Diagram) shows the variation of bending moment along the length of a beam or structural member.
SFD and BMD are essential for analyzing the internal forces and moments in a structu...
I am a structural engineer with 5 years of experience in designing and analyzing buildings and bridges.
Graduated with a degree in Civil Engineering
Worked on various projects including high-rise buildings and pedestrian bridges
Proficient in software such as AutoCAD and SAP2000
I am open to job locations that offer opportunities for growth and development.
I am willing to relocate for the right job opportunity
I prefer job locations with good transportation options
I am open to both urban and rural locations depending on the job requirements
Dual case in finding R value in EQ refers to considering both the worst-case scenario and the best-case scenario.
Dual case involves analyzing the structure's response to both maximum and minimum loads.
It helps in determining the range of possible outcomes for the structure.
For example, in seismic design, dual case analysis considers both the maximum and minimum seismic forces that the structure may experience.
I applied via LinkedIn and was interviewed in Feb 2024. There were 2 interview rounds.
Static analysis deals with loads that do not change over time, while dynamic analysis considers loads that vary with time.
Static analysis is used to determine the effects of loads that do not change over time, such as dead loads and live loads.
Dynamic analysis considers loads that vary with time, such as wind loads, seismic loads, and vibrations.
Static analysis is simpler and less computationally intensive compared to ...
Spectral fatigue analysis is performed by calculating the stress response of a structure to dynamic loads over a range of frequencies.
Determine the dynamic loads acting on the structure
Calculate the stress response of the structure using spectral methods
Analyze the stress response at different frequencies to assess fatigue damage
Consider factors such as material properties, load history, and environmental conditions
Use...
I prioritize transparency, disclose the conflict, and recuse myself if necessary.
Prioritize transparency and disclose the conflict to all parties involved
Evaluate the situation and determine if recusal is necessary
Seek guidance from a supervisor or ethics committee if unsure how to proceed
My notice period is currently one month.
Notice period is one month
I am required to give one month notice before leaving my current position
I can start a new position after one month
Yes, I have extensive experience with basements and below ground structures.
I have designed and analyzed numerous basements for residential and commercial buildings.
I am familiar with waterproofing techniques and soil mechanics related to below ground structures.
I have experience with retaining walls, foundations, and underground parking structures.
I have worked on projects involving deep excavations and shoring system...
I applied via Walk-in and was interviewed before Apr 2022. There were 3 interview rounds.
I am a structural engineer with 5 years of experience in designing and analyzing buildings and bridges.
I have a Bachelor's degree in Civil Engineering from XYZ University.
I have worked on several high-rise building projects, including the design of the structural system and the analysis of load-bearing elements.
I am proficient in using software such as AutoCAD, SAP2000, and ETABS for structural analysis and design.
I ha...
I faced difficulties in coordinating with other teams and managing tight deadlines.
Coordinating with other teams was challenging due to communication gaps and conflicting priorities.
Managing tight deadlines required careful planning and prioritization of tasks.
Ensuring the quality and safety of the project while meeting deadlines was a constant challenge.
Dealing with unexpected design changes and modifications added co...
I enjoyed the construction phase the most in my previous project.
I enjoyed seeing the design plans come to life as the structure was built.
I found it exciting to work closely with contractors and construction teams.
I enjoyed solving any unexpected challenges that arose during construction.
I found satisfaction in seeing the progress and completion of each construction milestone.
I enjoyed the hands-on aspect of the const...
Yes, I am comfortable working in remote locations.
I have experience working on projects in remote areas.
I am adaptable and can work in challenging environments.
I am willing to travel and work on-site as required.
I am familiar with using remote communication tools to stay connected with the team.
For example, I worked on a project in a remote area of Alaska where we had to fly in and out by helicopter.
The notice period with my current employer is 1 month.
My notice period with my current employer is 1 month.
I am required to give a 1-month notice before leaving my current job.
The standard notice period in my industry is 1 month, and I adhere to it.
I have already informed my current employer about my intention to leave and will serve the notice period accordingly.
I am passionate about structural engineering and your organization aligns with my career goals.
I have always been fascinated by the field of structural engineering and have a strong passion for it.
I have researched your organization extensively and am impressed by the projects you have undertaken.
Your organization has a reputation for excellence and innovation in the field of structural engineering.
I believe that joini...
I applied via Referral and was interviewed before Aug 2023. There was 1 interview round.
I am a structural engineer with a passion for designing safe and innovative structures.
Graduated with a degree in Civil Engineering
Experienced in using software like AutoCAD and SAP2000
Worked on projects ranging from residential buildings to bridges
Strong understanding of structural analysis and design principles
I have worked on various projects including designing high-rise buildings, bridges, and industrial structures.
Designed structural systems for a 30-story residential building
Performed analysis and design for a pedestrian bridge over a river
Worked on retrofitting an existing industrial facility to meet current building codes
based on 9 reviews
Rating in categories
Piping Engineer
167
salaries
| ₹6.5 L/yr - ₹22 L/yr |
Piping Designer
95
salaries
| ₹5.4 L/yr - ₹18 L/yr |
Electrical Designer
91
salaries
| ₹5 L/yr - ₹14.6 L/yr |
Process Engineer
85
salaries
| ₹5 L/yr - ₹19.6 L/yr |
Structural Designer
80
salaries
| ₹7 L/yr - ₹18.5 L/yr |
TechnipFMC
Saipem
Subsea 7
Petrofac