Upload Button Icon Add office photos

Idom

Compare button icon Compare button icon Compare

Filter interviews by

Idom General Instrumentation Engineer Trainee Interview Questions and Answers

Updated 18 Sep 2024

Idom General Instrumentation Engineer Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Told me to read p&id
  • Q2. Drew an gate logic
  • Ans. 

    An gate logic is a digital logic gate that outputs true only when all inputs are true.

    • AND gate has two or more inputs and one output

    • Output is true only when all inputs are true

    • Example: A AND B = Y, where Y is true only when both A and B are true

  • Answered by AI
  • Q3. All about documentation, if you are experienced, on which you have worked on
  • Q4. About projects you worked on
  • Q5. General understanding of discipline related documents and standards

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be honest

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Expansion stress formula
  • Ans. 

    Expansion stress formula calculates the stress caused by thermal expansion or contraction.

    • Expansion stress formula is given by: ΔL/L = αΔT, where ΔL is the change in length, L is the original length, α is the coefficient of thermal expansion, and ΔT is the change in temperature.

    • The formula can be used to calculate the stress caused by thermal expansion or contraction in piping systems.

    • The formula assumes that the mater...

  • Answered by AI
  • Q2. IBR LINES details.pressure ratings etc
  • Q3. Sustain stress formula
  • Ans. 

    Sustain stress formula calculates the maximum allowable stress for a given material under sustained loading.

    • Sustain stress formula is used in piping stress analysis to determine the maximum allowable stress for a given material under sustained loading.

    • The formula takes into account the material's yield strength, ultimate tensile strength, and safety factor.

    • Sustain stress formula is expressed as S = (Sy/FS) + (Su/FS) * ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically strong. Good knowledge of critical lines
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical round - Basic stress questions
Round 3 - Technical 

(1 Question)

  • Q1. Technical round - Basic questions
Round 4 - One-on-one 

(1 Question)

  • Q1. Interview with HOD - Personality test
Round 5 - HR 

(1 Question)

  • Q1. Salary discussion and OVERTIME discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Work culture and work life balance seems to be concerning.

Interview Questionnaire 

2 Questions

  • Q1. Working purpos
  • Q2. How to E. T. S work
  • Ans. 

    ETS (Educational Testing Service) is a non-profit organization that develops and administers standardized tests.

    • ETS develops and administers tests like the GRE, TOEFL, and Praxis exams.

    • The organization also offers research and assessment services for educational institutions.

    • ETS uses computer-based testing and scoring for many of its exams.

    • The organization has faced criticism for its role in the standardized testing in

  • Answered by AI

I applied via Naukri.com and was interviewed in Nov 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is the previous job role ?
  • Q2. What is the percentage of bitumen in DBM ?
  • Ans. 

    The percentage of bitumen in DBM varies depending on the specific mix design and project requirements.

    • DBM stands for Dense Bituminous Macadam, which is a type of road construction material.

    • The percentage of bitumen in DBM typically ranges from 4% to 6% by weight.

    • The exact percentage of bitumen is determined based on factors such as traffic load, climate conditions, and desired durability.

    • Higher percentages of bitumen a...

  • Answered by AI
  • Q3. Why you want change your company ?
  • Q4. What is your salary expectation ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't expect genuine to salary hike, really so sad to genuine salary negotiation Person .

I applied via Walk-in and was interviewed in Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. ELSR MEANS

Interview Preparation Tips

Interview preparation tips for other job seekers - Elevated service level Reservoir

I applied via Referral and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

I received a video call link and in that link will get the accounting basic questions for that we have to answer after a beep.

Round 2 - Technical 

(1 Question)

  • Q1. It was all basic accounting question.mostly related to 12th standard c v raman book Friendly interviewers
Round 3 - HR 

(1 Question)

  • Q1. 5 min telephonic call with recruiter

Interview Preparation Tips

Interview preparation tips for other job seekers - Get yourself prepared with basic accounting questions and be confident

I applied via Naukri.com and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Project related questions.
  • Q2. Scenario based technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview was technical . There were overall 3 rounds of interview , 2 technical and 1 hr.
The first technical was conducted by offshore lead and lasted around an hour
The second one involved manager ,senior manager from onshore along with lead and was completely technical.

I applied via Referral and was interviewed before Jan 2021. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What do you want to do in 5 years
  • Q2. What is glass
  • Ans. 

    Glass is a solid, transparent material made by heating a mixture of silica and other materials.

    • Glass is a non-crystalline, amorphous solid

    • It is made by heating a mixture of silica, soda ash, and lime

    • It can be molded into various shapes and sizes

    • It is used in windows, mirrors, lenses, and containers

    • Different types of glass include tempered, laminated, and stained glass

  • Answered by AI
  • Q3. What is graphene
  • Ans. 

    Graphene is a thin layer of pure carbon arranged in a hexagonal lattice.

    • It is the thinnest material known to man

    • It is a good conductor of electricity and heat

    • It is incredibly strong and flexible

    • It has potential applications in electronics, energy, and medicine

  • Answered by AI
  • Q4. What is your expectations

Interview Preparation Tips

Interview preparation tips for other job seekers - Talk about the topic wher you are good at

Interview Questionnaire 

1 Question

  • Q1. Hard core techanical

Idom Interview FAQs

How many rounds are there in Idom General Instrumentation Engineer Trainee interview?
Idom interview process usually has 1 rounds. The most common rounds in the Idom interview process are Technical.
What are the top questions asked in Idom General Instrumentation Engineer Trainee interview?

Some of the top questions asked at the Idom General Instrumentation Engineer Trainee interview -

  1. Drew an gate lo...read more
  2. All about documentation, if you are experienced, on which you have worked...read more
  3. General understanding of discipline related documents and standa...read more

Tell us how to improve this page.

Idom General Instrumentation Engineer Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Technologies Interview Questions
3.6
 • 266 Interviews
Saint-Gobain Interview Questions
4.0
 • 174 Interviews
AECOM Interview Questions
4.2
 • 120 Interviews
Worley Interview Questions
4.1
 • 113 Interviews
Bechtel Interview Questions
4.0
 • 68 Interviews
Samsung E&A Interview Questions
4.0
 • 61 Interviews
View all
Piping Designer
58 salaries
unlock blur

₹4 L/yr - ₹15.2 L/yr

Piping Engineer
18 salaries
unlock blur

₹7.3 L/yr - ₹21 L/yr

Structural Engineer
14 salaries
unlock blur

₹6 L/yr - ₹25 L/yr

Electrical Engineer
13 salaries
unlock blur

₹8 L/yr - ₹14 L/yr

Civil Structural Engineer
12 salaries
unlock blur

₹6.5 L/yr - ₹16.5 L/yr

Explore more salaries
Compare Idom with

Megha Engineering & Infrastructures

3.9
Compare

Shapoorji Pallonji Group

4.1
Compare

Alstom Transportation

3.7
Compare

Tata Technologies

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview