Upload Button Icon Add office photos

Ramboll

Compare button icon Compare button icon Compare

Filter interviews by

Ramboll Design Engineer Interview Questions, Process, and Tips

Updated 10 Jul 2024

Top Ramboll Design Engineer Interview Questions and Answers

Ramboll Design Engineer Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Patch load on towers
  • Ans. 

    Patch load on towers refers to the additional weight or load that is applied to a tower structure to strengthen or modify its capacity.

    • Patch load can be applied to towers to increase their capacity to withstand wind, seismic, or other loads.

    • Patch load can also be used to redistribute loads on a tower to prevent structural failures.

    • Examples of patch loads include adding steel plates or braces to a tower structure to inc...

  • Answered by AI
  • Q2. Epa calculation
Round 2 - Technical 

(2 Questions)

  • Q1. Work beyond shift time
  • Q2. Codes on towers
  • Ans. 

    Codes on towers refer to the specific design and construction standards that must be followed for safety and structural integrity.

    • Codes on towers are regulations set by organizations like ANSI/TIA and ASCE that dictate the design, construction, and maintenance of towers.

    • These codes cover aspects such as materials used, structural design, wind loading, and safety factors.

    • For example, ANSI/TIA-222-G specifies the require...

  • Answered by AI

Design Engineer Interview Questions & Answers

user image D.B.NIRANJAN

posted on 5 Jul 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Company Website and was interviewed before Jul 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is Truss member
  • Ans. 

    A truss member is a structural component of a truss, which is a framework of beams used to support a roof or bridge.

    • Truss members are typically straight and connected at joints.

    • They can be made of various materials such as wood, steel, or aluminum.

    • Common types of truss members include chords, webs, and diagonals.

    • Truss members are designed to carry tension or compression forces efficiently.

    • Examples of truss members incl

  • Answered by AI
  • Q2. How to check tower load valudation
  • Ans. 

    Tower load validation can be checked through structural analysis software and manual calculations.

    • Use structural analysis software to simulate different load conditions on the tower.

    • Calculate the expected load on the tower based on the design specifications and environmental factors.

    • Compare the simulated and calculated loads to ensure they are within the safe limits.

    • Perform on-site inspections and measurements to verif...

  • Answered by AI

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Nov 2017. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions Based on Hvac subjects basics

Interview Preparation Tips

Round: Resume Shortlist
Experience: Based of software training

Round: Group Discussion
Experience: Was asked to design HVAC for a home

General Tips: It was easy interview but process was so cool and they took a good care
Skills: Communication, Decision Making Skills
Duration: 1-4 weeks
College Name: Reva Institute of technology and management
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Aptitude Test 

Question where asked from trains,permutation and some grammer

Interview Preparation Tips

Topics to prepare for Wood Group Design Engineer interview:
  • Transformers
  • basic aptitude
Interview preparation tips for other job seekers - stay consistent
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Oct 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Duration of noticed period
  • Ans. 

    The duration of the notice period is typically specified in the employment contract.

    • The notice period can vary depending on the company and the position.

    • It is usually between 2 weeks to 3 months.

    • Some companies may require a longer notice period for senior positions.

    • The notice period can be negotiated during the hiring process.

    • It is important to adhere to the notice period to maintain a good professional relationship wi

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Software and std. .. Knowledge ofvoil and gas

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge about microstation and e3d. More than 10yr exp. Preferred
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via LinkedIn and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Cable sizing calculation
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical related to engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Good positive session
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

QA Reasoning English

Round 3 - Technical 

(1 Question)

  • Q1. Qualification specific questions

I applied via Referral and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Salary requirements and other benefits desired
  • Q2. Notice period at current company
Round 2 - Technical 

(1 Question)

  • Q1. Related to job description

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep applying. It will work out one day.
Be passionate and show good attitude during interview

I applied via Referral and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about you work experience.
  • Ans. I have explained them about my projects I have worked with key points and highlight.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - All questions were about my work experience. confidence and clarity about the work you have done matters a lot.
They have also asked which softwares and codes I have worked on. Their main requirement was US codes.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Good test. You need to do a good preparation to crack that.

Round 3 - Technical 

(2 Questions)

  • Q1. Technical round was a deatiled round. power system was the core.
  • Q2. Basic or Power System

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Company to work. Good working environment. Friendly culture.

Ramboll Interview FAQs

How many rounds are there in Ramboll Design Engineer interview?
Ramboll interview process usually has 1-2 rounds. The most common rounds in the Ramboll interview process are Technical.
How to prepare for Ramboll Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Ramboll. The most common topics and skills that interviewers at Ramboll expect are AutoCAD, Design Engineering, Civil Engineering, Design and Staad Pro.
What are the top questions asked in Ramboll Design Engineer interview?

Some of the top questions asked at the Ramboll Design Engineer interview -

  1. How to check tower load valudat...read more
  2. What is Truss mem...read more
  3. Patch load on tow...read more

Tell us how to improve this page.

Ramboll Design Engineer Interview Process

based on 4 interviews

Interview experience

4.3
  
Good
View more
Ramboll Design Engineer Salary
based on 71 salaries
₹4 L/yr - ₹16 L/yr
80% more than the average Design Engineer Salary in India
View more details

Ramboll Design Engineer Reviews and Ratings

based on 18 reviews

4.0/5

Rating in categories

3.8

Skill development

3.3

Work-life balance

2.8

Salary

3.7

Job security

3.9

Company culture

2.8

Promotions

3.1

Work satisfaction

Explore 18 Reviews and Ratings
Advanced Associate
139 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
71 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
58 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Associate
54 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Ramboll with

AECOM

4.2
Compare

Jacobs Engineering Group

4.1
Compare

WSP

4.2
Compare

ARCADIS

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview