Hindalco Industries
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
The maximum thickness of slab bar is typically around 32mm to 40mm.
The maximum thickness of slab bar is determined by the design requirements and load capacity of the structure.
In general, the maximum thickness of slab bar is around 32mm to 40mm.
Thicker slab bars may be used for heavy-duty structures or special design requirements.
M25 grade concrete ratio is 1:1:2 (1 part cement, 1 part sand, 2 parts aggregate)
M25 grade concrete has a ratio of 1:1:2 for cement, sand, and aggregate respectively
This means for every part of cement, there is an equal part of sand and double the part of aggregate
For example, for 1 cubic meter of M25 grade concrete, you would need 1 cubic meter of cement, 1 cubic meter of sand, and 2 cubic meters of aggregate
The maximum diameter of a dowel bar typically ranges from 1 inch to 2 inches.
Typical maximum diameter of dowel bar is 1 inch to 2 inches
Dowel bars are commonly used in concrete pavement joints
The diameter of dowel bars can vary based on the specific project requirements
1 M3 of cement volume is equivalent to 1440 kg or 1.44 tonnes.
1 M3 of cement volume is equal to 1440 kg or 1.44 tonnes.
This volume is commonly used in construction projects to calculate the amount of cement needed.
It is important to accurately measure and calculate cement volume to ensure the structural integrity of the project.
I applied via Walk-in and was interviewed before Sep 2023. There were 3 interview rounds.
A white range of altitude questions from verbal , nonverbal , logical and quantitative.
My previous company was a multinational engineering firm specializing in renewable energy projects.
Company focused on renewable energy projects
Multinational presence
Specialized in engineering services
Worked on projects like solar power plants and wind farms
I applied via Approached by Company and was interviewed in Jan 2022. There were 2 interview rounds.
I applied via Referral and was interviewed in Mar 2022. There were 3 interview rounds.
I have extensive experience in senior engineering roles and a proven track record of delivering high-quality results.
I have a deep understanding of complex engineering concepts and can apply them effectively in real-world scenarios.
I have successfully led and managed teams, ensuring efficient collaboration and achieving project goals.
I consistently stay updated with the latest industry trends and technologies, allowing...
Seeking new challenges and growth opportunities in a different organization.
Looking for a more challenging role
Seeking professional growth and development
Interested in exploring new technologies and industries
Want to work in a different organizational culture
Seeking better work-life balance
I worked as a Senior Engineer at XYZ Company.
Led a team of engineers in developing and implementing new software solutions.
Collaborated with cross-functional teams to ensure project success.
Designed and implemented scalable and efficient code.
Performed code reviews and provided technical guidance to junior engineers.
Successfully delivered multiple projects on time and within budget.
Implemented best practices and optimi...
Basic aptitude test with time limit
I applied via Other and was interviewed before Jul 2017. There were 3 interview rounds.
Sharp corners are avoided in casting to prevent stress concentration and improve the overall strength and quality of the casting.
Sharp corners can lead to stress concentration, which can cause cracks or failure in the casting.
Rounded corners distribute stress more evenly, reducing the likelihood of defects.
Sharp corners can also create difficulties during the casting process, such as mold filling and solidification iss...
posted on 19 May 2017
I appeared for an interview in Oct 2016.
Experienced retail professional with strong leadership skills and a passion for customer service.
Over 5 years of retail management experience
Proven track record of increasing sales and improving customer satisfaction
Strong leadership and team-building skills
Passionate about providing excellent customer service
Bachelor's degree in Business Administration
Alumina is obtained from bauxite through the Bayer process.
Bauxite is crushed and mixed with sodium hydroxide to form a slurry.
The slurry is heated and pressurized in a digester to dissolve the alumina content.
The resulting solution is cooled and filtered to remove impurities.
The purified solution is then heated to precipitate the alumina as a white powder.
The alumina powder is washed, dried, and calcined to produce pu...
The reaction for Al extraction from alumina involves the reduction of alumina using carbon or electrolysis.
Alumina (Al2O3) is first converted into aluminum chloride (AlCl3) by reacting with hydrochloric acid.
The aluminum chloride is then reduced to aluminum metal by either carbon reduction or electrolysis.
In carbon reduction, carbon (usually in the form of coke) is heated with the aluminum chloride to produce aluminum ...
There are four main types of cast iron: gray iron, white iron, ductile iron, and malleable iron.
Gray iron is the most common type and has excellent castability and good machinability.
White iron is very hard and brittle, often used for wear-resistant applications.
Ductile iron has high strength and ductility, making it suitable for a wide range of applications.
Malleable iron is heat-treated to improve its strength and du
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.
Mining is the process of extracting valuable minerals or other geological materials from the earth's surface or underground.
Mining is done to obtain various resources such as coal, gold, diamonds, and metals like iron, copper, and aluminum.
It involves the removal of soil, rocks, and other materials to access the desired minerals.
Mining can be categorized into surface mining and underground mining, depending on the loca...
I applied via Referral and was interviewed in May 2019. There were 3 interview rounds.
Newtonian fluid is a type of fluid that follows Newton's law of viscosity.
Newtonian fluid exhibits a linear relationship between shear stress and shear rate.
Examples of Newtonian fluids include water, air, and most oils.
Stages of fracture include initiation, propagation, and final failure.
Engine works by converting heat energy into mechanical work.
Basic thermodynamics questions may include concepts like the first and s...
based on 2 interviews
Interview experience
based on 6 reviews
Rating in categories
Assistant Manager
1k
salaries
| ₹5 L/yr - ₹16.8 L/yr |
Junior Engineer
609
salaries
| ₹2.5 L/yr - ₹7 L/yr |
Manager
566
salaries
| ₹9.3 L/yr - ₹28 L/yr |
Assistant Engineer
455
salaries
| ₹3.4 L/yr - ₹8.8 L/yr |
Deputy Manager
290
salaries
| ₹8.6 L/yr - ₹20 L/yr |
Rungta Mines
Hindustan Zinc
Vedanta Resources
Adani Enterprises