Upload Button Icon Add office photos

Havells

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Havells Design Engineer Interview Questions, Process, and Tips

Updated 18 Oct 2023

Top Havells Design Engineer Interview Questions and Answers

View all 9 questions

Havells Design Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Plastic shrinkage?
  • Q2. How many types of plastic material category?
  • Ans. 

    There are seven main categories of plastic materials.

    • Thermoplastics

    • Thermosets

    • Elastomers

    • Composites

    • Biodegradable plastics

    • Engineering plastics

    • High-performance plastics

  • Answered by AI
  • Q3. Plastic rib thickness standard?
  • Ans. 

    Plastic rib thickness standard varies depending on the application and material used.

    • Plastic rib thickness is typically between 0.5mm to 5mm.

    • Thicker ribs provide more strength but may increase material usage and cost.

    • Thinner ribs are more cost-effective but may be prone to warping or breaking.

    • Consider the material properties and intended use when determining rib thickness.

    • Consult industry standards and guidelines for s

  • Answered by AI
  • Q4. How many types of defects in plastic?
  • Ans. 

    There are three main types of defects in plastic: surface defects, physical defects, and chemical defects.

    • Surface defects include scratches, sink marks, and flow marks.

    • Physical defects include bubbles, voids, and warping.

    • Chemical defects include discoloration, degradation, and contamination.

  • Answered by AI
Round 3 - Technical 

(7 Questions)

  • Q1. Diff b/w hot runner & cold runner?
  • Q2. How to prevent plastic defects?
  • Ans. 

    Preventing plastic defects involves proper material selection, design optimization, and quality control measures.

    • Selecting the right type of plastic for the application

    • Optimizing the design to minimize stress concentrations

    • Implementing proper molding techniques and parameters

    • Conducting thorough quality control inspections

    • Training staff on proper handling and storage of plastic materials

  • Answered by AI
  • Q3. No. of tonnage molding machine you are used?
  • Ans. 

    I have experience working with various tonnage molding machines, including 50-ton, 100-ton, and 200-ton machines.

    • 50-ton molding machine

    • 100-ton molding machine

    • 200-ton molding machine

  • Answered by AI
  • Q4. What is draft angle in plastic?
  • Ans. 

    Draft angle in plastic is the degree of taper or slope applied to the vertical walls of a plastic part to facilitate its ejection from the mold.

    • Draft angles are typically recommended to be between 1-3 degrees for most plastic parts

    • Draft angles help prevent the part from getting stuck in the mold during ejection

    • Examples of draft angles include adding a slight taper to the sides of a plastic cup or the walls of a plastic

  • Answered by AI
  • Q5. What is parametric modelling?
  • Ans. 

    Parametric modelling is a design approach where the model is defined by a set of parameters and rules that govern its shape and size.

    • Uses parameters to define the shape and size of the model

    • Allows for easy modification of the design by changing parameters

    • Enables creation of complex designs with interconnected features

    • Commonly used in CAD software like SolidWorks and Autodesk Inventor

  • Answered by AI
  • Q6. How to solve plastic defects issue in plastic?
  • Ans. 

    Plastic defects can be solved by identifying root causes, adjusting processing parameters, using quality materials, and implementing proper maintenance.

    • Identify root causes of defects such as improper molding conditions or poor material quality

    • Adjust processing parameters like temperature, pressure, and cooling rate to optimize production

    • Use high-quality materials to ensure consistency and durability of the final produ...

  • Answered by AI
  • Q7. Cad test on NX Software 2306 version? Plastic parts devlop in cad softwares?
  • Ans. 

    Yes, CAD tests can be conducted on NX Software 2306 version. Plastic parts can be developed in CAD software.

    • CAD tests can be performed on NX Software 2306 version to ensure compatibility and functionality.

    • CAD software allows for the design and development of plastic parts with precision and accuracy.

    • Features like 3D modeling, simulation, and analysis tools in CAD software aid in the development of plastic parts.

    • Example...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Havells Design Engineer interview:
  • Product Design
  • Injection Moulding
  • UG NX
Interview preparation tips for other job seekers - Read plastic related topics?

Skills evaluated in this interview

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Quantitative and qualitative reasoning, electrical and electronics basics

Round 3 - Technical 

(2 Questions)

  • Q1. Projects based , basic electronics concepts
  • Q2. Embedded projects related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare resume well . Go through your projects properly. Revise foundational concepts

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

Interview questions from similar companies

I applied via Company Website and was interviewed in Jul 2021. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself.
Round 2 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 3 - HR 

Interview Preparation Tips

Interview preparation tips for other job seekers - Recently I find job , i have five year experience in optical fiber cables ltd
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed before May 2023.

Round 1 - Technical 

(1 Question)

  • Q1. Wires nd cable related

Senior Engineer Interview Questions & Answers

KEI Industries user image GANDU VENKATESWARA RAO

posted on 5 Nov 2023

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Transformers Installation
Round 3 - Technical 

(1 Question)

  • Q1. Eelctrical Testing for equiomemt
  • Ans. 

    Electrical testing for equipment involves verifying functionality and safety through various tests.

    • Perform insulation resistance tests to check for any leakage currents

    • Conduct continuity tests to ensure proper electrical connections

    • Verify voltage and current ratings are within acceptable limits

    • Test for proper grounding to prevent electrical hazards

    • Use specialized equipment like multimeters and insulation testers

    • Documen

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Small projects regular location transfers
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - HR 

(2 Questions)

  • Q1. Work experience?
  • Q2. Educational and work details details?
Round 2 - Technical 

(2 Questions)

  • Q1. Civil engineering related questions
  • Q2. Assignment for costing and Estimation
  • Ans. 

    Costing and estimation assignment for Senior Engineer position

    • Understand the scope of the project and gather all relevant information

    • Break down the project into smaller tasks and estimate the time and cost for each task

    • Consider factors such as materials, labor, equipment, and overhead costs

    • Use historical data or industry benchmarks to validate your estimates

    • Provide a detailed cost breakdown and justification for your e

  • Answered by AI
Round 3 - Aptitude Test 

Computer software skills

Round 4 - Assignment 

Estimation & costing related work

Round 5 - HR 

(2 Questions)

  • Q1. Documents check
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Need a proper knowledge about your profile and proper documentation for further process
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Previous project cost and scope
  • Ans. Previous project cost -467 cr and scope overhead line convert into underground project
  • Answered by Arvind Maurya
Round 2 - Technical 

(2 Questions)

  • Q1. Cable type and current carrying capacity and also methode of Laying
  • Ans. 

    Different cable types have varying current carrying capacities and methods of laying, impacting overall electrical system performance.

    • Different cable types such as PVC, XLPE, and rubber have different current carrying capacities.

    • Current carrying capacity is influenced by factors like conductor size, insulation material, and ambient temperature.

    • Methods of laying cables include direct burial, conduit installation, and ov...

  • Answered by AI
  • Q2. Xlpe cable are used in ug cable and cable capacity can be varry as per size of cable

I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Profile discussion and expectations
  • Q2. Technical discussion regarding your previous assignments

Interview Preparation Tips

Interview preparation tips for other job seekers - Only apply here if you want good learning and salary ..after joining growth related to profile is limited
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Why do u leave current job.
  • Q2. Why do u join HPL electric

Interview Preparation Tips

Interview preparation tips for other job seekers - Strong technical knowledge. And positive attitude.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2025.

Round 1 - Technical 

(5 Questions)

  • Q1. How do you modem connected with ccms.
  • Ans. 

    Modem can be connected with CCMS using a physical cable or wirelessly through a network connection.

    • Connect the modem to the CCMS using an Ethernet cable for a wired connection.

    • Configure the modem to connect to the CCMS network wirelessly through Wi-Fi or cellular data.

    • Ensure proper settings and security protocols are in place for a secure connection.

    • Test the connection to ensure data transfer and communication between

  • Answered by AI
  • Q2. How do you intrigate with ccms
  • Ans. 

    I integrate with CCMS by collaborating with cross-functional teams, utilizing CCMS tools for documentation, and ensuring consistency and accuracy in content.

    • Collaborate with cross-functional teams to understand content requirements

    • Utilize CCMS tools for creating, editing, and managing documentation

    • Ensure consistency and accuracy in content by following style guides and best practices

  • Answered by AI
  • Q3. What is the Process of lights showing on dashboard
  • Ans. 

    The lights on the dashboard indicate various issues or statuses of the vehicle.

    • Lights are controlled by sensors that monitor different aspects of the vehicle

    • Different colors indicate different levels of urgency or severity

    • Common lights include check engine, oil pressure, battery, and brake system

    • Refer to the vehicle's manual for specific meanings of each light

  • Answered by AI
  • Q4. Tell me about you self.
  • Q5. How many types of meter & describe.
  • Ans. 

    There are various types of meters used for different purposes such as measuring electricity, water, gas, etc.

    • Electricity meters: measure the amount of electricity consumed by a household or business

    • Water meters: measure the volume of water used in a residential or commercial building

    • Gas meters: measure the amount of gas consumed for heating or cooking purposes

    • Smart meters: digital devices that record energy consumption...

  • Answered by AI
Contribute & help others!
anonymous
You can choose to be anonymous

Havells Interview FAQs

How many rounds are there in Havells Design Engineer interview?
Havells interview process usually has 3 rounds. The most common rounds in the Havells interview process are Technical, Resume Shortlist and Aptitude Test.
How to prepare for Havells Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Havells. The most common topics and skills that interviewers at Havells expect are CAD, D, Design Development, Design Engineering and Detailing.
What are the top questions asked in Havells Design Engineer interview?

Some of the top questions asked at the Havells Design Engineer interview -

  1. Cad test on NX Software 2306 version? Plastic parts devlop in cad softwar...read more
  2. How many types of plastic material catego...read more
  3. How to solve plastic defects issue in plast...read more

Recently Viewed

COMPANY BENEFITS

State Street Corporation

No Benefits

INTERVIEWS

Hpl Electric & Power

No Interviews

INTERVIEWS

Havells

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Havells

No Interviews

SALARIES

State Street Syntel

No Salaries

SALARIES

State Street Syntel

SALARIES

State Street Syntel

REVIEWS

State Street Corporation

No Reviews

REVIEWS

State Street Corporation

No Reviews

Tell us how to improve this page.

Havells Design Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Havells Design Engineer Salary
based on 48 salaries
₹2.1 L/yr - ₹8 L/yr
5% more than the average Design Engineer Salary in India
View more details

Havells Design Engineer Reviews and Ratings

based on 15 reviews

3.9/5

Rating in categories

3.3

Skill development

4.4

Work-life balance

3.6

Salary

3.8

Job security

3.4

Company culture

3.8

Promotions

3.6

Work satisfaction

Explore 15 Reviews and Ratings
Assistant Manager
900 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
607 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
390 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
384 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
347 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Havells with

Bajaj Electricals

4.0
Compare

Crompton Greaves Consumer Electricals

3.8
Compare

V-Guard Industries

4.4
Compare

Panasonic Life Solutions India

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview