Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by H.G. Infra Engineering Team. If you also belong to the team, you can get access from here

H.G. Infra Engineering Verified Tick

Compare button icon Compare button icon Compare
4.2

based on 885 Reviews

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

H.G. Infra Engineering Senior Structural Engineer Interview Questions and Answers

Updated 6 Apr 2023

H.G. Infra Engineering Senior Structural Engineer Interview Experiences

2 interviews found

I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. First about cv like project details and work experience
  • Q2. About stream like structure
  • Q3. Pile, girder, stressing,

Interview Preparation Tips

Interview preparation tips for other job seekers - Cv shortlisted few chance otherwise all company selection based on reference
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Site Execution work Related.
  • Ans. Any Bridge make first the soil test then make the foundation,open or deep foundation pile cap , abutment/pier then abutment/pier cap then rest the bearings on pedestals after that we provide the RCC/PSC Girders then provided the Deck slab after this the load test on Bridge is correct hence ok.
  • Answered Anonymously
Round 3 - HR 

(1 Question)

  • Q1. Personal interview and About project location and salary Discussion.
  • Ans. Related you & about your family then choose the location after that salary Discussion should be perfect.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for H.G. Infra Engineering Senior Structural Engineer interview:
  • Civil Engineering
  • Construction
  • Infrastructure Development
Interview preparation tips for other job seekers - Clear the eye contact and be confident for technical Round.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How do frame a structure?
  • Ans. 

    Structures are framed by designing a skeleton of beams and columns to support the load.

    • Start by determining the loads the structure will need to support.

    • Design a skeleton of beams and columns to distribute the load.

    • Consider factors such as material strength, stability, and aesthetics.

    • Use software like AutoCAD or Revit to create detailed plans and drawings.

    • Consult with architects and other engineers to ensure the struct

  • Answered by AI
  • Q2. What will be the value for shape mode?
  • Ans. 

    The value for shape mode represents the most frequently occurring value in a dataset.

    • Shape mode is the value that appears most frequently in a dataset.

    • It is used to describe the central tendency of a dataset.

    • For example, in a dataset of test scores, if the score of 85 appears most frequently, then 85 is the shape mode.

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the is code for structure
  • Ans. 

    The IS code for structures in India is IS 456:2000, which covers the general requirements for the design and construction of reinforced concrete structures.

    • The IS code for structures in India is IS 456:2000

    • It covers the general requirements for the design and construction of reinforced concrete structures

    • The code provides guidelines for materials, design, construction, quality control, and maintenance of structures

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. What is your straight & weakness?

I applied via Naukri.com and was interviewed in Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. 1. What is density of Steel ?
  • Ans. 

    The density of steel is approximately 7.85 grams per cubic centimeter.

    • The density of steel is commonly measured in grams per cubic centimeter (g/cm³).

    • The density of steel can vary depending on the specific type and composition of the steel.

    • For example, the density of carbon steel is typically around 7.85 g/cm³.

    • Stainless steel, on the other hand, has a slightly lower density of around 7.9 g/cm³.

    • The density of steel is a...

  • Answered by AI
  • Q2. 2. Density of RCC and PCC
  • Ans. 

    The density of RCC (Reinforced Cement Concrete) and PCC (Plain Cement Concrete) varies depending on the mix proportions.

    • The density of RCC typically ranges from 2200 to 2500 kg/m³.

    • The density of PCC generally ranges from 2200 to 2400 kg/m³.

    • The density can vary based on the type and size of aggregates used, the water-cement ratio, and the presence of additives.

    • For example, a mix with a higher proportion of aggregates wi...

  • Answered by AI
  • Q3. What is BBS and how it is calculated ?
  • Ans. 

    BBS stands for Bar Bending Schedule. It is a document that provides details of reinforcement steel bars required for a construction project.

    • BBS is calculated based on the design drawings and specifications.

    • It includes details such as bar diameter, length, shape, and number of bars required for each structural element.

    • BBS helps in estimating the quantity of steel required and also ensures that the reinforcement is place...

  • Answered by AI
  • Q4. What type of Structures you executed before ?
  • Ans. 

    I have executed various types of structures including high-rise buildings, bridges, and industrial facilities.

    • Executed high-rise buildings with complex structural systems

    • Designed and analyzed bridges with different span lengths and types of materials

    • Managed the structural design of industrial facilities such as power plants and manufacturing plants

    • Worked on retrofitting and rehabilitation of existing structures

    • Collabor...

  • Answered by AI
  • Q5. How much experience do you have ?
  • Q6. What is your salary expectation?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while answering the Interviewer.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Bolt to botlt distance how much
  • Ans. 

    The bolt to bolt distance depends on the specific design requirements and standards for the structural connection.

    • The bolt to bolt distance is typically specified in the design drawings or calculations provided by the engineer.

    • It is important to follow the recommended bolt to bolt distance to ensure the structural integrity of the connection.

    • The bolt to bolt distance may vary depending on factors such as the size and t...

  • Answered by AI
  • Q2. Edge distance how much ?
  • Ans. 

    Edge distance refers to the distance between the edge of a structural member and the center of a hole or fastener.

    • Edge distance is typically specified in design codes and standards.

    • It is important to maintain adequate edge distance to prevent failure of the connection.

    • The required edge distance can vary depending on the type of connection and the loading conditions.

    • For example, in steel connections, the minimum edge di...

  • Answered by AI
  • Q3. Column to base plate which type of weld ?
  • Ans. 

    The type of weld used for connecting a column to a base plate is typically a fillet weld.

    • Fillet welds are commonly used for connecting structural steel components.

    • The size of the fillet weld is determined based on the forces and stresses the connection will experience.

    • Proper welding procedures and inspections are essential to ensure the weld's quality and strength.

  • Answered by AI
  • Q4. Column to beam how to joint ?
  • Ans. 

    Column to beam joints are typically connected using various methods such as welding, bolting, or using mechanical connectors.

    • Common methods for connecting column to beam include welding, bolting, or using mechanical connectors

    • Welding is a common method where the column and beam are fused together using heat

    • Bolting involves using bolts to secure the column and beam together

    • Mechanical connectors such as shear connectors ...

  • Answered by AI
  • Q5. Top moment column to beam top side which weld ?
  • Ans. 

    The top moment column to beam top side is typically welded on the compression side of the beam.

    • Weld the top moment connection on the compression side of the beam for maximum strength.

    • Ensure proper welding techniques and inspections are followed to maintain structural integrity.

    • Consider using fillet welds or groove welds depending on the design requirements.

    • Consult structural engineering codes and standards for specific...

  • Answered by AI
  • Q6. Edge distance to cover vertical reinforcement 75 mm all type of fdn
  • Ans. 

    Edge distance of 75mm is required to cover vertical reinforcement in all types of foundations.

    • Edge distance is important to ensure proper anchorage and structural integrity of the reinforcement.

    • In this case, a minimum edge distance of 75mm is specified for covering vertical reinforcement in all types of foundations.

    • Examples of foundations where this requirement applies include spread footings, pile caps, and mat founda

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please study base plate detail and shear connection and moment connection bolted and welded type
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. I was shortlisted to the interview through my university. The interview was quite friendly and questions such as basic SFD and BMD were asked, losses of prestress were asked to explain, details about India...

I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is volume of concrete?
  • Ans. 

    The volume of concrete refers to the amount of space occupied by concrete.

    • Volume of concrete is measured in cubic units (e.g., cubic meters or cubic feet).

    • It is calculated by multiplying the length, width, and height of the concrete element.

    • For example, if a concrete slab has a length of 5 meters, width of 3 meters, and height of 0.15 meters, the volume of concrete would be 5 x 3 x 0.15 = 2.25 cubic meters.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I give interview at Ho office.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at Birla Institute of Technology and Science (BITS), Pilani and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

Social media connecting people

Round 2 - Technical 

(2 Questions)

  • Q1. Timoshenko beam theory
  • Q2. Sfd and bmd diagram
  • Ans. 

    Sfd and bmd diagrams show the variation of shear force and bending moment along the length of a structural member.

    • SFD (Shear Force Diagram) shows the variation of shear force along the length of a beam or structural member.

    • BMD (Bending Moment Diagram) shows the variation of bending moment along the length of a beam or structural member.

    • SFD and BMD are essential for analyzing the internal forces and moments in a structu...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Introduce yourself
  • Ans. 

    I am a structural engineer with 5 years of experience in designing and analyzing buildings and bridges.

    • Graduated with a degree in Civil Engineering

    • Worked on various projects including high-rise buildings and pedestrian bridges

    • Proficient in software such as AutoCAD and SAP2000

  • Answered by AI
  • Q2. Preference of job location
  • Ans. 

    I am open to job locations that offer opportunities for growth and development.

    • I am willing to relocate for the right job opportunity

    • I prefer job locations with good transportation options

    • I am open to both urban and rural locations depending on the job requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well both technical and communication skills
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Design of base plate
  • Ans. 

    Base plate design involves determining the size, thickness, and material of the plate to support the structural load.

    • Consider the load requirements and dimensions of the column being supported

    • Calculate the required thickness and size of the base plate based on the load

    • Select a suitable material for the base plate, such as steel or concrete

    • Ensure proper anchorage and connection details for the base plate

  • Answered by AI
  • Q2. Roughly draw a base plate connection
  • Ans. 

    A base plate connection is a structural element used to connect a steel column to a concrete foundation.

    • Base plate connections are typically used in steel structures to transfer loads from the column to the foundation.

    • The base plate is usually welded to the bottom of the column and anchored to the concrete foundation using anchor bolts.

    • The base plate connection design must consider factors such as load transfer, bendin...

  • Answered by AI

H.G. Infra Engineering Interview FAQs

How many rounds are there in H.G. Infra Engineering Senior Structural Engineer interview?
H.G. Infra Engineering interview process usually has 2 rounds. The most common rounds in the H.G. Infra Engineering interview process are Technical, Resume Shortlist and HR.
What are the top questions asked in H.G. Infra Engineering Senior Structural Engineer interview?

Some of the top questions asked at the H.G. Infra Engineering Senior Structural Engineer interview -

  1. Site Execution work Relat...read more
  2. Pile, girder, stressi...read more
  3. About stream like struct...read more

Tell us how to improve this page.

People are getting interviews through

based on 2 H.G. Infra Engineering interviews
Referral
50%
50% candidates got the interview through other sources.
Moderate Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates
H.G. Infra Engineering Senior Structural Engineer Salary
based on 15 salaries
₹5 L/yr - ₹7.5 L/yr
46% less than the average Senior Structural Engineer Salary in India
View more details

H.G. Infra Engineering Senior Structural Engineer Reviews and Ratings

based on 5 reviews

4.2/5

Rating in categories

3.5

Skill development

3.8

Work-Life balance

4.2

Salary & Benefits

4.0

Job Security

3.7

Company culture

3.8

Promotions/Appraisal

4.1

Work Satisfaction

Explore 5 Reviews and Ratings
Assistant Manager
107 salaries
unlock blur

₹4.2 L/yr - ₹12 L/yr

Senior Engineer
82 salaries
unlock blur

₹4.1 L/yr - ₹8.7 L/yr

Assistant Engineer
82 salaries
unlock blur

₹2.4 L/yr - ₹4.5 L/yr

Structural Engineer
66 salaries
unlock blur

₹2.6 L/yr - ₹5.4 L/yr

Engineer
59 salaries
unlock blur

₹2.5 L/yr - ₹6.8 L/yr

Explore more salaries
Compare H.G. Infra Engineering with

Ashoka Buildcon

4.1
Compare

IRB Infrastructure

4.0
Compare

Nagarjuna Construction Company

4.1
Compare

PNC Infratech

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview