Upload Button Icon Add office photos

Gestamp

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Gestamp Design Engineer Interview Questions and Answers

Updated 18 Jun 2023

Gestamp Design Engineer Interview Experiences

3 interviews found

Design Engineer Interview Questions & Answers

user image Chetan H Paulzagade

posted on 12 Dec 2021

I applied via Referral and was interviewed in Nov 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Press tool Design basic questions.
  • Q2. Catia press tool model tree.
  • Q3. Draw progressive striplayout.
  • Ans. 

    Progressive stripline layout is a type of transmission line layout used in high-frequency circuits.

    • Progressive stripline layout is used to reduce the size of transmission lines in high-frequency circuits.

    • It involves gradually increasing the width of the stripline as it approaches the load.

    • This helps to reduce the impedance mismatch and improve signal integrity.

    • The layout is commonly used in microwave and RF circuits.

    • Ex...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Whatever you mention in your CV. Prepare all point.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. About the roles and responsibilities
  • Q2. Why you want to switch the job
Round 3 - One-on-one 

(2 Questions)

  • Q1. Related to domain knowledge
  • Q2. About the software learnt and the domain depth knowledge

Interview Preparation Tips

Topics to prepare for Gestamp Design Engineer interview:
  • stamping
  • Press Tools
  • tandem dies
  • parametric modelling

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

I applied via Company Website and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about your self
  • Q2. Press tool and about transfer dies

Interview Preparation Tips

Interview preparation tips for other job seekers - Good knowledge is required for their interview........

Interview questions from similar companies

I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Production related questions
  • Q2. Working flow rated questions
  • Q3. Any other factory related
Round 3 - HR 

(1 Question)

  • Q1. Salary related questions
Round 4 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all GD tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Need good job for my skills and production related.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About HIL testing
  • Q2. About vector tools

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about CAN

I applied via Naukri.com and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions only CNC machine

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical knowledge Improvement

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Previous company job profile.
  • Q2. Plc related questions
  • Q3. Family background

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position
Contribute & help others!
anonymous
You can choose to be anonymous

Gestamp Interview FAQs

How many rounds are there in Gestamp Design Engineer interview?
Gestamp interview process usually has 2-3 rounds. The most common rounds in the Gestamp interview process are Resume Shortlist, One-on-one Round and HR.
What are the top questions asked in Gestamp Design Engineer interview?

Some of the top questions asked at the Gestamp Design Engineer interview -

  1. Draw progressive striplayo...read more
  2. about the software learnt and the domain depth knowle...read more
  3. related to domain knowle...read more

Recently Viewed

LIST OF COMPANIES

Fare Labs

Locations

SALARIES

Aptean

INTERVIEWS

MyCaptain

No Interviews

INTERVIEWS

Full Creative

No Interviews

JOBS

Full Creative

No Jobs

INTERVIEWS

Aptean

No Interviews

INTERVIEWS

Aptean

No Interviews

INTERVIEWS

Gestamp

10 top interview questions

INTERVIEWS

Aptean

10 top interview questions

INTERVIEWS

Aptean

No Interviews

Tell us how to improve this page.

Gestamp Design Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more
Gestamp Design Engineer Salary
based on 26 salaries
₹2 L/yr - ₹6.2 L/yr
17% less than the average Design Engineer Salary in India
View more details

Gestamp Design Engineer Reviews and Ratings

based on 3 reviews

3.0/5

Rating in categories

1.5

Skill development

3.0

Work-life balance

2.9

Salary

3.5

Job security

2.6

Company culture

3.5

Promotions

1.5

Work satisfaction

Explore 3 Reviews and Ratings
Junior Engineer
113 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
69 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
65 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
63 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
57 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Gestamp with

Bharat Forge

3.9
Compare

TVS Sundram Fasteners

3.7
Compare

Rico Auto Industries

3.8
Compare

Samvardhana Motherson Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview