Upload Button Icon Add office photos

Gestamp

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Gestamp Tool & DIE Maker Interview Questions and Answers

Updated 3 Sep 2021

Gestamp Tool & DIE Maker Interview Experiences

1 interview found

I applied via Company Website and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. How much working hours?

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Apr 2024. There were 5 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Which material use in die case
  • Ans. 

    Tool & DIE makers typically use materials like steel, aluminum, and carbide in die casting.

    • Steel is commonly used for its durability and heat resistance.

    • Aluminum is often used for its lightweight properties.

    • Carbide is used for its hardness and wear resistance.

    • Other materials like copper, brass, and titanium may also be used depending on the specific requirements of the die casting process.

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. How ti grind drills
  • Ans. 

    To grind drills, use a bench grinder with a fine grit wheel, ensure the drill is securely held in a vise, and maintain a consistent angle and pressure while grinding.

    • Use a bench grinder with a fine grit wheel for precision grinding

    • Securely hold the drill in a vise to prevent movement during grinding

    • Maintain a consistent angle (typically 118 degrees for general purpose drills) and pressure while grinding

    • Check the drill ...

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Which speed use in lathe at carbide work
  • Ans. 

    Carbide work on a lathe typically requires higher speeds for optimal performance.

    • Carbide work on a lathe usually requires speeds between 800-2000 RPM

    • Higher speeds are needed to prevent chipping or premature wear of the carbide tooling

    • Consult the manufacturer's recommendations for the specific carbide tool being used

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. Expectations salary
Round 5 - Case Study 

BE mechanical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Smart work

I applied via Company Website and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tools related questions
  • Q2. What is tolerance? How many type of tolerance
  • Ans. 

    Tolerance is the allowable variation in a dimension. There are two types of tolerance: unilateral and bilateral.

    • Tolerance is the difference between the maximum and minimum limits of a dimension that is acceptable.

    • Unilateral tolerance allows variation in only one direction, while bilateral tolerance allows variation in both directions.

    • Tolerance is important in manufacturing to ensure that parts fit together properly and...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good 5’s in our Working place.
Cold mind any time.
First purity in safety.
Problem solving Defending by situation.

I applied via Company Website and was interviewed before Jan 2021. There were 8 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Realted die maker or die fitter questions
  • Q2. How many types of mould
  • Ans. 

    There are several types of molds used in tool & die making.

    • Injection molds

    • Blow molds

    • Compression molds

    • Transfer molds

    • Thermoforming molds

    • Extrusion molds

    • Rotational molds

    • Die casting molds

    • Stamping dies

  • Answered by AI
  • Q3. Generally how many how many types mould use in injection moulding
  • Ans. 

    The number of types of molds used in injection molding varies depending on the complexity of the product being manufactured.

    • The number of mold types can range from a single-cavity mold to multi-cavity molds.

    • Different molds may be used for different parts of the product or for different variations of the product.

    • Molds can also vary in terms of their design, material, and complexity.

    • Examples of mold types include single-...

  • Answered by AI
  • Q4. What is injection moulding
  • Ans. 

    Injection moulding is a manufacturing process used to produce parts by injecting molten material into a mould.

    • It is a widely used method for manufacturing plastic parts.

    • The process involves melting the material, injecting it into a mould, and allowing it to cool and solidify.

    • The mould is typically made of steel and is designed to give the desired shape to the final product.

    • Injection moulding is used in various industri...

  • Answered by AI
  • Q5. Injection moulding process is molten a material and recycling used so many times

Interview Preparation Tips

Interview preparation tips for other job seekers - Give me one join our company and learn more in your company and learn new something I wish you give me a one chance
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. No more questions
  • Q2. No more questions thank you

Interview Preparation Tips

Topics to prepare for Rico Auto Industries Tool Room Engineer interview:
  • Tool room part inspection report
  • NPD
  • Tool room maintenance
  • Part inspection report
  • Quality Analysis
Interview preparation tips for other job seekers - Best comfortable and supported
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Vmc 2d programmere 3d programmere
Round 3 - One-on-one 

(1 Question)

  • Q1. All types machineing

Interview Preparation Tips

Interview preparation tips for other job seekers - VMC programmer

Interview Questionnaire 

2 Questions

  • Q1. Usual questions about, introduction, background, work experience, and some technical questions about, forging, casting, dies, metals, unit conversions etc.
  • Q2. Prepare, manufacturing processes, metals and properties, specially forging, casting, gauges etc.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is mould, how many type of mould.
  • Ans. 

    A mould is a hollowed-out block that is filled with a liquid or pliable material to create a specific shape or form. There are several types of moulds used in manufacturing processes.

    • Moulds are commonly used in industries such as plastics, ceramics, and metal casting.

    • Types of moulds include injection moulds, compression moulds, blow moulds, and rotational moulds.

    • Each type of mould has its own unique characteristics and...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good for learning, freshers are very much beneficial to learn various types of work.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Nov 2023. There were 4 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. About your introduction.
  • Ans. Good morning sir/ madam. First of all thank you for giving me this opportunities to introduce my self, my name is UTSAV, i am basically from SAMASTIPUR. But currentiIy study in C.I.P.E.T. HAJIPUR . IDID COMPLETED MY INTERMIDIATED IN SCIENCE FROM B.S.E.B PATNA. I belong to nuclear joint family. my strength , i am self motivated, hard working and a discipline person. my short term goal to get a job in a reputed company ...
  • Answered Anonymously
  • Q2. My self UTSAV . from SAMASTIPUR
Round 2 - Aptitude Test 

About any question from tool room

Round 3 - Aptitude Test 

Any question from mold.

Round 4 - Assignment 

Mold design assembly

I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions related to your field,Software knowledge on which your working
  • Q2. Brief introduction about the company that your attending interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident,
Contribute & help others!
anonymous
You can choose to be anonymous

Recently Viewed

INTERVIEWS

Aptean

No Interviews

INTERVIEWS

Aptean

No Interviews

SALARIES

MyCaptain

INTERVIEWS

Gestamp

No Interviews

INTERVIEWS

MyCaptain

No Interviews

SALARIES

mFilterIt

INTERVIEWS

Aptean

No Interviews

INTERVIEWS

Gestamp

No Interviews

INTERVIEWS

Fare Labs

No Interviews

INTERVIEWS

MyCaptain

20 top interview questions

Tell us how to improve this page.

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 329 Interviews
UNO Minda Interview Questions
4.0
 • 169 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
DENSO Interview Questions
4.1
 • 72 Interviews
JTEKT Interview Questions
4.2
 • 65 Interviews
Faurecia Interview Questions
3.9
 • 59 Interviews
View all
Gestamp Tool & DIE Maker Salary
based on 14 salaries
₹2.5 L/yr - ₹4.1 L/yr
10% more than the average Tool & DIE Maker Salary in India
View more details

Gestamp Tool & DIE Maker Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Junior Engineer
113 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
69 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
65 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
63 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
57 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Gestamp with

Bharat Forge

3.9
Compare

TVS Sundram Fasteners

3.7
Compare

Rico Auto Industries

3.8
Compare

Samvardhana Motherson Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview