AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Gestamp Production Department Interview Questions and Answers
Gestamp Production Department Interview Experiences
1 interview found
Anonymous
(4 Questions)
- Q1. What knowledge should a mechanical engineer have?
- Ans.
A mechanical engineer should have knowledge of mechanics, materials, manufacturing processes, and design principles.
Mechanics: understanding of forces, motion, and energy
Materials: knowledge of properties and behavior of materials
Manufacturing processes: familiarity with various methods of production
Design principles: ability to create and analyze designs for functionality and safety
- Q2. Mechanical properties.
- Q3. Definition of stain and stees.
- Ans.
Stains are discolorations caused by substances that penetrate the surface of a material, while steels are alloys of iron and carbon.
Stains are often caused by liquids such as coffee, wine, or ink.
Stains can be removed through various methods such as washing, bleaching, or using stain removers.
Steel is a commonly used material in the production industry due to its strength and durability.
Different types of steel are use...
- Q4. Som and Tom completely prepared
(3 Questions)
- Q1. About IC engine and CI engine
- Q2. Classification of Gear and types of gear
- Ans.
Gears are classified based on the position of axes and types include spur, helical, bevel, worm, rack and pinion.
Classification based on position of axes: parallel, intersecting, non-intersecting
Types of gears: spur, helical, bevel, worm, rack and pinion
Spur gears have straight teeth and are used for low speed and high power transmission
Helical gears have angled teeth and provide smooth and quiet operation
Bevel gears a...
- Q3. About boiler and classification of boiler
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Technical questions related to your field,Software knowledge on which your working
- Q2. Brief introduction about the company that your attending interview
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Feb 2023. There were 4 interview rounds.
Test contain basic questions regarding engineering.
(1 Question)
- Q1. Questions were asked from resume. Question were related to my projects from engineering. other questions were related to concepts used in my projects.
(1 Question)
- Q1. Asked about the company. other question was regarding my future vision about my career.
Interview Preparation Tips
Alluri Harish
Tough one to attempt
(1 Question)
- Q1. Asked questions related to few mechanical engineering topics
I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Automotive design related questions
Interview Preparation Tips
Basic level
(1 Question)
- Q1. Basic engineering questions
(1 Question)
- Q1. Drawing and CATIA related
Interview Preparation Tips
Interview Questionnaire
2 Questions
- Q1. Gd&t question, gd&t symbols
- Q2. Solidwork software discussion
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 3 interview rounds.
(1 Question)
- Q1. CAD test will be there and Interview questions related to interior/exterior with respect to Design rules , Homologation
(1 Question)
- Q1. Design rules related, master section related, Homologation related
Interview Preparation Tips
- CATIA
- UG NX
- Homologation
- Surface Modeling
- Part Modeling
- Engineering Drawing
(2 Questions)
- Q1. Explain various GD&T
- Ans.
Geometric Dimensioning and Tolerancing (GD&T) is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of features on a part.
It uses symbols, such as concentricity, flatness, and perpendicularity, to communicate the desired tolerances.
GD&T helps ensure that parts fit together properly and function as intended.
Examples of GD&T symbo...
- Q2. Explain DFM, DFS, DFA
- Ans.
DFM, DFS, and DFA stand for Design for Manufacturing, Design for Service, and Design for Assembly, respectively.
DFM focuses on designing products that are easy and cost-effective to manufacture.
DFS focuses on designing products that are easy to service and maintain.
DFA focuses on designing products that are easy to assemble.
Consideration of DFM, DFS, and DFA principles can lead to more efficient and cost-effective prod...
Skills evaluated in this interview
I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What are the different types of Snap fits used in plastics
- Ans.
Snap fits are used in plastics to join two parts together without the need for additional fasteners.
Cantilever snap fit
Annular snap fit
Torsion snap fit
Snap hinge
Snap bead
Snap tab
Snap lock
Snap latch
Snap hook
- Q2. What is Remastering in plastics
- Ans.
Remastering in plastics is the process of improving the quality of recycled plastic materials.
It involves adding new additives to the recycled plastic to enhance its properties.
The process can also involve removing impurities and contaminants from the recycled plastic.
Remastering helps to increase the value and usability of recycled plastic materials.
Examples of remastered plastics include PET bottles, HDPE containers,
Interview Preparation Tips
- CATIA
Gestamp Interview FAQs
Tell us how to improve this page.
Gestamp Interviews By Designations
- Gestamp Design Engineer Interview Questions
- Gestamp Senior Engineer Interview Questions
- Gestamp Assistant Manager Interview Questions
- Gestamp Dispatch Officer Interview Questions
- Gestamp Mechanical Engineer Interview Questions
- Gestamp Trainee Production Engineer Interview Questions
- Gestamp Production & Quality Engineer Interview Questions
- Gestamp Engineer Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Department Manager Interview Questions
- Department Head Interview Questions
- Quality Department Interview Questions
- Assistant Department Manager Interview Questions
- Collection Department Interview Questions
- Maintenance Department Technician Interview Questions
- Administrator Department Interview Questions
- Trainee Department Manager Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
|
Junior Engineer
113
salaries
|  ₹2.2 L/yr - ₹5.1 L/yr |
|
Quality Engineer
74
salaries
| ₹1.5 L/yr - ₹5 L/yr |
|
Engineer
64
salaries
| ₹3 L/yr - ₹6.3 L/yr |
|
Assistant Manager
63
salaries
| ₹4.6 L/yr - ₹11.5 L/yr |
|
Production Engineer
58
salaries
| ₹1.5 L/yr - ₹6 L/yr |
Bosch
Yazaki
Faurecia
DENSO
- Home >
- Interviews >
- Gestamp Interview Questions >
- Gestamp Production Department Interview Questions
