40+ Incedo Interview Questions and Answers

Various waterproofing applications are used on terrace roof slabs of commercial and residential buildings.

• Liquid waterproofing membranes

• Bituminous waterproofing membranes

• Polyurethane waterproofing membranes

• Cementitious waterproofing coatings

• Sheet waterproofing membranes

• Examples: Dr. Fixit Newcoat, Fosroc Proofex, SikaTop Seal 107

The floor to floor height of commercial buildings varies depending on the building's purpose and design.

• The floor to floor height of a typical office building is around 3.9 meters.

• Warehouses and industrial buildings have higher floor to floor heights, usually around 4.5 to 6 meters.

• Residential buildings have lower floor to floor heights, usually around 2.7 to 3 meters.

• The floor to floor height can also be affected by the type of construction materials used and the building's ...read more

Precision air conditioning units are commonly used in server rooms.

• Precision air conditioning units are designed to provide precise temperature and humidity control.

• These units are capable of maintaining stable and optimal conditions for sensitive equipment like servers.

• They often feature redundant systems for reliability and may include features like hot aisle/cold aisle containment.

• Examples of precision air conditioning units include brands like Liebert, APC, and Mitsubishi...read more

Construction joints are not typically provided for staircases.

• Construction joints are typically used in concrete structures to allow for expansion and contraction due to temperature changes.

• Staircases are usually designed as a single unit and do not require construction joints.

• However, if the staircase is very long or has multiple flights, construction joints may be necessary to allow for movement.

• In this case, the joints would be located at the landings between flights of st...read more

Modern waterproofing techniques include liquid applied membranes, preformed membranes, and crystalline waterproofing.

• Liquid applied membranes: applied as a liquid and cures to form a seamless, waterproof membrane. Examples include polyurethane and acrylic coatings.

• Preformed membranes: sheets of waterproof material that are applied to the surface. Examples include EPDM and PVC membranes.

• Crystalline waterproofing: a chemical treatment that reacts with water to form crystals tha...read more

PAC stands for Programmable Automation Controller. It is a device used in industrial automation to control and monitor processes.

• PAC is a type of controller used in industrial automation systems.

• It is programmable and can be customized to control and monitor various processes.

• PACs are often used in manufacturing plants, power plants, and other industrial settings.

• They can communicate with other devices and systems to gather data and make decisions.

• PACs offer advanced features...read more

A water cold chiller is a device that cools water by removing heat from it, typically used in air conditioning systems or industrial processes.

• A water cold chiller uses a refrigeration cycle to cool water.

• It consists of components such as a compressor, condenser, expansion valve, and evaporator.

• The chiller circulates chilled water through a system to remove heat from the surroundings.

• It is commonly used in air conditioning systems for cooling buildings or in industrial proces...read more

HVAC stands for Heating, Ventilation, and Air Conditioning. UPS stands for Uninterruptible Power Supply. AHU stands for Air Handling Unit.

• HVAC refers to the technology used for indoor environmental comfort, including heating, cooling, and air quality control.

• UPS is a device that provides emergency power to a load when the input power source fails.

• AHU is a device used to regulate and circulate air as part of a heating, ventilation, and air conditioning system.

The angle subtended on a clock when the time is 3.20 is 40 degrees.

• To find the angle subtended, we need to calculate the difference between the hour and minute hands.

• At 3:00, the hour hand is at 90 degrees and the minute hand is at 0 degrees.

• For every minute, the minute hand moves 6 degrees.

• At 20 minutes past 3, the minute hand would have moved 20 * 6 = 120 degrees.

• The hour hand also moves slightly. In 20 minutes, it moves 20 * 0.5 = 10 degrees.

• Therefore, the angle subtended ...read more

An air cold chiller is a device that cools air by removing heat from it.

• An air cold chiller is commonly used in air conditioning systems to cool indoor spaces.

• It works by circulating a refrigerant that absorbs heat from the air and then releases it outside.

• The chilled air is then distributed through ducts or vents to cool the desired area.

• Air cold chillers can be used in various settings such as homes, offices, hospitals, and industrial facilities.

• Examples of air cold chiller...read more

Marbles are better for a luxury club house due to their elegance, durability, and timeless appeal.

• Marbles offer a luxurious and elegant look, perfect for a high-end club house.

• Marbles are durable and long-lasting, making them a practical choice for a high-traffic area like a club house.

• Marbles have a timeless appeal and can increase the overall value of the property.

• Italian tiles and micro-concreting may not provide the same level of luxury and sophistication as marbles.

LP stands for Low Pass and HP stands for High Pass.

• LP (Low Pass) is a type of filter that allows low-frequency signals to pass through while attenuating high-frequency signals.

• HP (High Pass) is a type of filter that allows high-frequency signals to pass through while attenuating low-frequency signals.

• LP and HP filters are commonly used in audio systems to control the frequency range of the output signal.

• LP filters are used to remove high-frequency noise or unwanted harmonics ...read more

Fire is a rapid chemical reaction that releases heat and light, a pump is a device that moves fluids, and a fire alarm system is a network of sensors and alarms to detect and alert of fires.

• Fire is a rapid chemical reaction involving fuel, oxygen, and heat

• Pump is a device that moves fluids by mechanical action

• Fire alarm system is a network of sensors, alarms, and control panels to detect and alert of fires

• Examples: Fire - combustion of wood, Pump - water pump, Fire alarm syst...read more

An AHU (Air Handling Unit) is a device used to regulate and circulate air as part of a heating, ventilation, and air conditioning (HVAC) system.

• AHU is an abbreviation for Air Handling Unit.

• It is a device used in HVAC systems to control and distribute air.

• AHUs typically consist of a fan, heating and cooling coils, filters, and dampers.

• They are responsible for conditioning and circulating air within a building.

• AHUs can be found in various settings such as commercial buildings, ...read more

A UPS (Uninterruptible Power Supply) is a device that provides emergency power to a load when the input power source fails.

• UPS is used to protect critical equipment from power outages, voltage fluctuations, and other power-related issues.

• It typically consists of a battery, an inverter, and a rectifier.

• UPS can be used for various applications such as computers, data centers, hospitals, telecommunications, etc.

• Examples of UPS brands include APC, CyberPower, Eaton, and Tripp Lit...read more

ACB stands for Air Circuit Breaker and VCB stands for Vacuum Circuit Breaker.

• ACB is a type of circuit breaker that uses air as the medium to extinguish the arc.

• VCB is a type of circuit breaker that uses vacuum as the medium to extinguish the arc.

• Both ACB and VCB are used for electrical circuit protection and can interrupt the flow of current in case of faults.

• ACBs are commonly used in low voltage applications, while VCBs are used in medium to high voltage applications.

A CSU, or Channel Service Unit, is a device used in telecommunications to connect a digital line to a customer's equipment.

• CSU stands for Channel Service Unit.

• It is used in telecommunications to connect a digital line to a customer's equipment.

• CSUs provide signal regeneration, line coding, and diagnostic capabilities.

• They ensure reliable transmission of data over long distances.

• Examples of CSUs include T1 CSUs, ISDN CSUs, and DSL CSUs.

Deflection in PT slab can be arrested by increasing the thickness of slab, using high strength concrete, and providing additional reinforcement.

• Increase the thickness of the slab to reduce deflection

• Use high strength concrete to increase the load carrying capacity of the slab

• Provide additional reinforcement such as steel bars or post-tensioning tendons to increase the stiffness of the slab

• Ensure proper curing of the concrete to prevent cracking and reduce deflection

• Use proper...read more

The fire hyd. and sprinkler line require 3kg.

• The fire hyd. and sprinkler line need to be filled with 3kg of water or other extinguishing agent.

• This is a standard requirement for fire safety in buildings.

• Regular maintenance and testing of the fire suppression system is necessary to ensure it is functioning properly.

Cap rate is a real estate metric used to determine the potential return on investment.

• Cap rate stands for capitalization rate.

• It is calculated by dividing the net operating income (NOI) by the property's value.

• The result is expressed as a percentage and represents the rate of return an investor can expect from the property.

• A higher cap rate indicates a higher potential return on investment, but may also indicate higher risk.

• Cap rates vary by location, property type, and marke...read more

Commercial leases may include clauses related to rent, maintenance, insurance, and termination.

• Rent payment terms and conditions

• Maintenance and repair responsibilities

• Insurance requirements

• Termination clauses

• Renewal options

• Subleasing restrictions

• Use restrictions

• Security deposit requirements

• Indemnification clauses

• Default and remedies provisions

To handle MEP project execution involves coordinating with various teams, ensuring timely completion, and adhering to quality standards.

• Coordinate with design team, contractors, and suppliers to ensure smooth execution

• Monitor progress regularly and address any issues or delays promptly

• Ensure compliance with safety regulations and quality standards

• Manage budget and resources effectively to meet project goals

• Communicate effectively with stakeholders to keep them informed of pro...read more

The required pressure on the top floor in the fire line depends on the building's height and the water supply available.

• The pressure should be high enough to reach the top floor and provide adequate water flow for firefighting.

• The National Fire Protection Association (NFPA) recommends a minimum pressure of 100 psi at the top floor.

• Factors such as the building's height, water supply, and fire protection system should be considered when determining the required pressure.

• A fire ...read more

Safety precautions during lifting and excavation involve proper planning, training, equipment, and communication.

• Conduct a risk assessment before starting any lifting or excavation work

• Ensure workers are properly trained on safe lifting techniques and excavation procedures

• Use appropriate equipment such as cranes, hoists, and excavators

• Ensure proper communication between workers during lifting and excavation operations

• Implement proper signage and barriers to prevent unauthoriz...read more

Chiller safety in water cooled chiller is crucial to prevent accidents and ensure efficient operation.

• Regular maintenance and inspection of the chiller and its components is necessary to ensure safety.

• Proper installation and operation of safety devices such as pressure relief valves and temperature sensors is important.

• Training of personnel on safe handling and operation of the chiller is essential.

• Strict adherence to safety protocols and guidelines is necessary to prevent ac...read more

Designing a metro line for a new station involves planning routes, considering passenger flow, and ensuring connectivity.

• Conduct a feasibility study to determine the need for a new station

• Consider factors such as population density, traffic patterns, and potential future growth

• Plan the route to optimize connectivity with existing stations and transportation hubs

• Design the station layout to accommodate passenger flow and accessibility

• Ensure safety measures are in place, such a...read more

IKW for chillers refers to the Input Kilowatts required to operate the chillers efficiently.

• IKW for chillers can vary depending on the size and efficiency of the chiller unit.

• Factors such as ambient temperature, load demand, and maintenance can also impact the IKW.

• Regular monitoring and adjustments can help optimize the IKW for chillers.

• Example: A large industrial chiller may have an IKW range of 100-500 kW.

Tenants have various options in commercial leases.

• Renewal options

• Expansion options

• Termination options

• Subleasing options

• Assignment options

Project scheduling involves creating a timeline for project tasks, while costing involves estimating the expenses associated with each task.

• Project scheduling involves breaking down the project into tasks, determining the sequence of tasks, and assigning timeframes to each task.

• Costing involves estimating the resources required for each task, including labor, materials, and equipment costs.

• Project scheduling and costing help in ensuring that the project is completed on time a...read more

Budgeting and forecasting are financial planning tools used to estimate future revenues and expenses.

• Budgeting involves setting financial goals and creating a plan to achieve them.

• Forecasting involves predicting future financial outcomes based on historical data and trends.

• Budgeting helps in allocating resources effectively, while forecasting helps in making informed decisions.

• Examples: Creating an annual budget for a company, forecasting sales for the upcoming quarter.

Baseline schedules should be updated regularly to reflect changes in project scope, timeline, and resources.

• Baseline schedules should be updated at key project milestones or when significant changes occur.

• Regular updates ensure that the schedule remains accurate and reflects the current status of the project.

• Updates should be communicated to all stakeholders to keep them informed of any changes.

• Examples of changes that may require updating the baseline schedule include delays...read more

Real estate valuation involves analyzing market trends, property characteristics, comparable sales, and income potential.

• Consider market trends and economic conditions

• Analyze property characteristics such as location, size, and condition

• Look at comparable sales in the area to determine market value

• Evaluate income potential for rental properties using methods like the income approach

• Utilize valuation methods such as the cost approach, sales comparison approach, and income appr...read more

Creating SOPs with engineering guidelines involves documenting step-by-step procedures based on engineering principles.

• Understand the engineering processes and requirements

• Collaborate with engineers to ensure accuracy and effectiveness

• Document procedures in a clear and concise manner

• Include safety measures and quality control checkpoints

• Regularly review and update SOPs based on feedback and changes in engineering guidelines

Over 25 years of experience in property management, including overseeing residential and commercial properties.

• Managed a portfolio of over 500 residential units, ensuring high occupancy rates and tenant satisfaction

• Negotiated and executed lease agreements with commercial tenants, maximizing rental income

• Implemented cost-saving measures such as energy-efficient upgrades and preventative maintenance programs

• Led a team of maintenance staff and contractors to ensure timely repair...read more

Yes, I am willing to relocate to a new city for this opportunity.

• I am open to new experiences and challenges

• I have relocated before for work and am familiar with the process

• I am excited about the prospect of exploring a new city and culture

The best way to summarize a document in English

• Identify key points and main ideas

• Use concise language and avoid unnecessary details

• Organize information in a logical order

• Include a brief introduction and conclusion

• Avoid plagiarism by using your own words

• Proofread for errors and clarity

Check points of water proofing involves inspecting areas prone to water leakage and ensuring proper sealing and protection.

• Inspecting roof for cracks or missing shingles

• Checking windows and doors for gaps or faulty seals

• Examining foundation for signs of water seepage

• Testing waterproofing membranes in basements or bathrooms

HSE culture refers to the shared values, beliefs, attitudes, and behaviors related to health, safety, and environmental practices within an organization.

• HSE culture is shaped by leadership and management practices

• It involves promoting a proactive approach to identifying and mitigating risks

• It emphasizes the importance of employee engagement and participation

• It includes regular training and communication on HSE policies and procedures

• Examples of HSE culture include a focus on ...read more

Compliance types include regulatory, legal, ethical, and industry-specific. Frequency varies based on type and jurisdiction.

• Regulatory compliance involves adhering to laws and regulations set by government agencies, such as the FDA or EPA.

• Legal compliance involves following laws and regulations set by the legal system, such as labor laws or tax codes.

• Ethical compliance involves following moral and ethical principles, such as those outlined in a company's code of conduct.

• Indus...read more

Crashing of schedule is a technique used in project management to shorten the project duration by adding more resources.

• Crashing involves adding more resources to critical path activities to reduce the overall project duration.

• It is typically used when there is a need to meet a deadline or when there are financial incentives for early completion.

• Crashing may increase project costs due to the additional resources required.

• Example: Hiring additional workers to work overtime in ...read more

HVAC stands for Heating, Ventilation, and Air Conditioning system which is responsible for providing thermal comfort and acceptable indoor air quality.

• HVAC system controls the temperature, humidity, and air quality in a building or vehicle.

• It includes components such as furnaces, air conditioners, heat pumps, ductwork, and thermostats.

• HVAC systems can be centralized or decentralized depending on the size and layout of the building.

• Regular maintenance of HVAC systems is import...read more

EHS management refers to the process of identifying, assessing, and controlling hazards in the workplace to ensure the safety and health of employees.

• EHS management involves developing and implementing policies and procedures to prevent accidents and injuries in the workplace.

• It includes identifying potential hazards and assessing the risks associated with them.

• EHS management also involves training employees on safety procedures and providing them with the necessary equipment...read more

Check point of plastering is a crucial step in ensuring a smooth and even finish on walls or ceilings.

• Check for any uneven areas or bumps in the plaster surface

• Ensure that the plaster is fully dried before proceeding to the next step

• Use a straight edge or level to check for any dips or high spots in the plaster

• Inspect the corners and edges for any rough or unfinished areas

• Make sure to sand down any rough patches before applying paint or wallpaper

Planning for future management involves setting clear goals, developing strategies, and continuously evaluating and adjusting plans.

• Set clear and achievable goals for the organization

• Develop strategies to achieve these goals, including resource allocation and timeline

• Regularly evaluate progress and adjust plans as needed

• Consider potential challenges and risks in the future management plan

• Involve key stakeholders in the planning process to ensure buy-in and alignment

The responsibility of a Guest Relation Executive (GRE) is to ensure guests have a positive experience by addressing their needs and concerns.

• Providing excellent customer service to guests

• Handling guest inquiries and resolving complaints

• Assisting guests with check-in and check-out processes

• Coordinating special requests or arrangements for guests

• Maintaining a welcoming and professional atmosphere in the hotel