Black & Veatch OSP Engineer Interview Questions and Answers

Q1. Why do you want yo join
Ans. 
I want to join because I am passionate about project management and engineering challenges.
• Passionate about project management and engineering

• Excited about the challenges and opportunities in the role

• Interested in contributing to the success of the team and company
Answered by AI
Add your answer
Q2. What are your strengths
Add your answer

Q1. Engineering flow and sequence
Add your answer
Q2. Manhours realted to engineering activities
Add your answer

The test is very difficult you have to complete all 20 questions which consist GC , subject related

Q1. What is the wave trape?
Ans. 
A wave trap is a device used in electrical engineering to prevent unwanted signals or frequencies from entering a system.
• Wave traps are typically used in power systems to filter out specific frequencies that can cause interference.

• They are designed to allow only desired signals to pass through while blocking unwanted signals.

• Wave traps can be used in substations, transmission lines, and other electrical systems to impr...read more
Answered by AI
Add your answer
Q2. Which types of circuit breaker use in substation
Ans. 
Types of circuit breakers used in substations include air circuit breakers, oil circuit breakers, vacuum circuit breakers, and SF6 circuit breakers.
• Air circuit breakers are commonly used in low voltage applications.

• Oil circuit breakers are used in high voltage applications.

• Vacuum circuit breakers are compact and reliable, suitable for medium voltage applications.

• SF6 circuit breakers are used in high voltage substations
Answered by AI
Add your answer

Global warming ,covid-19, current affairs

Q1. DAISCUSS ABOUT TECHNICAL ASPECTS OF CIVIL ENGINEERING AND SOFTWARE SKILLS
Add your answer
Q2. CODAL PROVISION OF CONCRETE AND COMMANDS OF SOFTWARE
Ans. 
CODAL provisions for concrete refer to the guidelines and regulations set by relevant authorities, while commands of software are the specific instructions or functions within a software program.
• CODAL provisions for concrete include specifications for mix design, strength requirements, and durability standards.

• Commands of software for site engineers may include functions for structural analysis, quantity takeoff, and p...read more
Answered by AI
Add your answer

Q1. What is the types of Compressors?
Ans. 
Types of compressors include reciprocating, rotary, centrifugal, and axial compressors.
• Reciprocating compressors use pistons to compress air or gas.

• Rotary compressors use rotating mechanisms such as screws or vanes.

• Centrifugal compressors use a rotating impeller to create centrifugal force.

• Axial compressors use rotating blades to compress air in a straight line.

• Examples include reciprocating air compressors, rotary scr...read more
Answered by AI
Add your answer
Q2. What are the Procedure to install the Centrifugal axial compressors?.
Ans. 
The procedure to install centrifugal axial compressors involves proper planning, alignment, assembly, and testing.
• Ensure proper foundation is prepared to support the compressor

• Align the compressor with the piping system for proper flow

• Assemble the compressor components according to manufacturer's instructions

• Test the compressor for performance and efficiency before final installation
Answered by AI
Add your answer
Q3. Types of pump and it's classifications?
Ans. 
Types of pumps include centrifugal, positive displacement, and axial flow pumps.
• Centrifugal pumps: use centrifugal force to move fluid through the pump

• Positive displacement pumps: move fluid by trapping a fixed amount and forcing it through the discharge port

• Axial flow pumps: move fluid parallel to the pump shaft
Answered by AI
Add your answer
Q4. Lifting Plan Procedure?
Ans. 
A lifting plan procedure is a detailed plan outlining the steps and precautions to be taken when lifting heavy objects.
• Identify the weight and dimensions of the object to be lifted

• Determine the appropriate lifting equipment needed

• Assess the location and environment for any obstacles or hazards

• Assign roles and responsibilities to team members involved in the lift

• Communicate clearly and follow the plan step by step

• Conduc...read more
Answered by AI
Add your answer
Q5. Pumps Capacity?
Ans. 
Pumps capacity refers to the maximum flow rate a pump can handle.
• Pumps capacity is typically measured in gallons per minute (GPM) or liters per minute (LPM).

• It is important to consider the required flow rate when selecting a pump for a specific application.

• Factors such as pump size, motor power, and system pressure affect the capacity of a pump.

• For example, a centrifugal pump may have a capacity of 500 GPM, while a dia
Answered by AI
Add your answer
Q6. Methods statement of rotating and static equipment.
Ans. 
Methods statement for maintaining rotating and static equipment in mechanical engineering.
• Regular inspection and maintenance schedules for both rotating and static equipment

• Use of proper lubrication for rotating equipment to prevent wear and tear

• Checking alignment and balance of rotating equipment to ensure smooth operation

• Testing and calibrating static equipment for accuracy and efficiency

• Following manufacturer's guid...read more
Answered by AI
Add your answer

Q1. What is minimum gap between two structures for seismic point of view
Ans. 
Minimum gap between two structures for seismic point of view is typically around 1.5 times the height of the taller structure.
• Minimum gap is usually 1.5 times the height of the taller structure to reduce seismic interaction.

• This gap helps prevent collision or structural damage during an earthquake.

• Building codes and regulations may specify minimum gaps for seismic safety.

• Example: If one building is 100 feet tall, the m...read more
Answered by AI
Add your answer

Q1. Tell meh about your company
Ans. In that company I will try my level best to that company
Answered Anonymously
Add your answer
Q2. My company is the one of that greatest company
Add your answer
Q3. IfI joined that Company I Will give my to that company
Add your answer
Q4. U ask sir /madam y u joined that company
Add your answer
Q5. Iam extremely talent person once encouragement never disappoint on u
Add your answer

Q1. How did you hear about company
Ans. 
Through a job posting on LinkedIn
• Found job posting on LinkedIn

• Researched company after seeing job posting

• Connected with current employees on LinkedIn

• Received referral from a friend or colleague
Answered by AI
Add your answer
Q2. How many experience in high rise with contractor company
Ans. 
I have 8 years of experience working on high rise projects with contractor companies.
• I have worked on multiple high rise projects ranging from 20 to 50 stories.

• Managed structural design and construction of high rise buildings.

• Collaborated with architects, contractors, and clients to ensure project success.
Answered by AI
Add your answer

Asking about Experience like structure, finishing.
What is testing of Steel IS CODE
BILLING OF IS CODE
BBS IS CODE.
CMD IS CODE.

SAFETY HAZARD ANALYSIS.
CONSTRUCTION METHOD STATEMENT.

TYPES OF PLASTER
OUTER PLASTER THICKNESS.
INNER PLASTER THICKNESS.