Upload Button Icon Add office photos

Burns & McDonnell

Compare button icon Compare button icon Compare

Filter interviews by

Burns & McDonnell Electrical Engineer Interview Questions, Process, and Tips

Updated 23 Feb 2025

Top Burns & McDonnell Electrical Engineer Interview Questions and Answers

Burns & McDonnell Electrical Engineer Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

The test is very difficult you have to complete all 20 questions which consist GC , subject related

Round 2 - Technical 

(2 Questions)

  • Q1. What is the wave trape?
  • Ans. 

    A wave trap is a device used in electrical engineering to prevent unwanted signals or frequencies from entering a system.

    • Wave traps are typically used in power systems to filter out specific frequencies that can cause interference.

    • They are designed to allow only desired signals to pass through while blocking unwanted signals.

    • Wave traps can be used in substations, transmission lines, and other electrical systems to impr...

  • Answered by AI
  • Q2. Which types of circuit breaker use in substation
  • Ans. 

    Types of circuit breakers used in substations include air circuit breakers, oil circuit breakers, vacuum circuit breakers, and SF6 circuit breakers.

    • Air circuit breakers are commonly used in low voltage applications.

    • Oil circuit breakers are used in high voltage applications.

    • Vacuum circuit breakers are compact and reliable, suitable for medium voltage applications.

    • SF6 circuit breakers are used in high voltage substations

  • Answered by AI
Round 3 - Group Discussion 

Global warming ,covid-19, current affairs

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice one
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Feb 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the applications of motor starters?
  • Q2. What are the fundamentals of the power triangle?

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on fundamentals.

Electrical Engineer Interview Questions Asked at Other Companies

Q1. What is the difference between Switch gear & Circuit Breakers ... read more
Q2. What is ATS, transformer maintenance procedure, protection of tra ... read more
asked in Tata Steel
Q3. 1.what is composite error and ratio error in current transformer?
Q4. 1. Power factor of transformer 2. types of DC machine 3. Working ... read more
Q5. How many types of transformer according to voltage transfer

I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Substation questions
  • Q2. Primary engineering questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company to work for so give your best try to get done

Electrical Engineer Jobs at Burns & McDonnell

View all

Interview questions from similar companies

I applied via Company Website and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. They asked me about my before project, what is my responsibilities
  • Q2. Then I give the details of of my project, say about my role and responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Fearless give ur answers, give ur best and wear formal dress in interview time

I applied via Monster and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Do u know Electrical load calculation
  • Ans. 

    Yes, electrical load calculation is the process of determining the amount of power that a building or electrical system requires.

    • Electrical load calculation involves considering the power requirements of various electrical devices and appliances in a building or system.

    • Factors such as voltage, current, and power factor are taken into account during the calculation.

    • Load calculation helps in determining the appropriate s...

  • Answered by AI
  • Q2. Site experince
  • Q3. Achievement in carrer
  • Ans. 

    Developed a new power distribution system for a large manufacturing plant, resulting in a 20% increase in efficiency.

    • Designed and implemented a new power distribution system for a large manufacturing plant

    • Collaborated with a team of engineers and technicians to ensure successful installation and operation

    • Resulted in a 20% increase in efficiency and significant cost savings for the company

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company. Need to explain in detail
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Working of power transformer
  • Ans. 

    A power transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Power transformers are used to step up or step down voltage levels in electrical power transmission and distribution systems.

    • They consist of a primary winding, a secondary winding, and a magnetic core.

    • When an alternating current flows through the primary winding, it creates a magne...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, answer without hesitate
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. ANY ONE electrical SOLAR WORK
  • Q2. Solar work electrical maintenance
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Pvsyst losses, cable sizing, fuse derating
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About youself? Role and responsibilities? why are you interested?
  • Ans. 

    I am an experienced Electrical Engineer with a passion for designing and implementing innovative solutions.

    • I have a strong background in electrical engineering, with a focus on power systems and control systems.

    • I have successfully designed and implemented electrical systems for various projects, including commercial buildings and industrial plants.

    • I am skilled in using CAD software for electrical design and have experi...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. About yourself? Role and responsibilities? day to day site work? what do u know about bechtel? Electrical safety? Drawing details?shop drawing? LOTO system? NC for quality and safety? Earthing system? powe...
Round 4 - HR 

(1 Question)

  • Q1. Documents? Current base salary? Expected base salary? Tentative date of joining?
  • Ans. 

    I can provide the required documents and discuss salary and joining details.

    • I can provide all necessary documents such as resume, certifications, and transcripts.

    • My current base salary is $X per year.

    • I expect a base salary in the range of $Y to $Z per year.

    • I am available to join within X weeks/months.

    • I can discuss further details during the interview.

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Transformer tests

Burns & McDonnell Interview FAQs

How many rounds are there in Burns & McDonnell Electrical Engineer interview?
Burns & McDonnell interview process usually has 2 rounds. The most common rounds in the Burns & McDonnell interview process are Technical, Resume Shortlist and Aptitude Test.
How to prepare for Burns & McDonnell Electrical Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Burns & McDonnell. The most common topics and skills that interviewers at Burns & McDonnell expect are Electrical Engineering, Electricals, Switchgear, Electrical Design and Substation.
What are the top questions asked in Burns & McDonnell Electrical Engineer interview?

Some of the top questions asked at the Burns & McDonnell Electrical Engineer interview -

  1. What are the applications of motor starte...read more
  2. What are the fundamentals of the power triang...read more
  3. Which types of circuit breaker use in substat...read more

Tell us how to improve this page.

Burns & McDonnell Electrical Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Burns & McDonnell Electrical Engineer Salary
based on 88 salaries
₹4.5 L/yr - ₹10 L/yr
61% more than the average Electrical Engineer Salary in India
View more details

Burns & McDonnell Electrical Engineer Reviews and Ratings

based on 13 reviews

4.2/5

Rating in categories

3.7

Skill development

4.4

Work-life balance

3.7

Salary

4.8

Job security

4.1

Company culture

3.6

Promotions

3.3

Work satisfaction

Explore 13 Reviews and Ratings
Electrical Engineer
88 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Associate Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Designer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Control Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Associate Electrical Engineer
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Burns & McDonnell with

Black & Veatch

4.3
Compare

AECOM

4.2
Compare

Jacobs Engineering Group

4.1
Compare

Fluor Corporation

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview