Upload Button Icon Add office photos

Filter interviews by

Nasser S. Al Hajri Corporation Electrical Engineer Interview Questions and Answers

Updated 16 Dec 2023

Nasser S. Al Hajri Corporation Electrical Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Self introduction & previous company experience

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

The test is very difficult you have to complete all 20 questions which consist GC , subject related

Round 2 - Technical 

(2 Questions)

  • Q1. What is the wave trape?
  • Ans. 

    A wave trap is a device used in electrical engineering to prevent unwanted signals or frequencies from entering a system.

    • Wave traps are typically used in power systems to filter out specific frequencies that can cause interference.

    • They are designed to allow only desired signals to pass through while blocking unwanted signals.

    • Wave traps can be used in substations, transmission lines, and other electrical systems to impr...

  • Answered by AI
  • Q2. Which types of circuit breaker use in substation
  • Ans. 

    Types of circuit breakers used in substations include air circuit breakers, oil circuit breakers, vacuum circuit breakers, and SF6 circuit breakers.

    • Air circuit breakers are commonly used in low voltage applications.

    • Oil circuit breakers are used in high voltage applications.

    • Vacuum circuit breakers are compact and reliable, suitable for medium voltage applications.

    • SF6 circuit breakers are used in high voltage substations

  • Answered by AI
Round 3 - Group Discussion 

Global warming ,covid-19, current affairs

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice one
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

H R manager and senior Electrical Engineer group interview

Round 3 - Technical 

(2 Questions)

  • Q1. 240 KV to 13.8 KV transformer and 13.8 KV to 6.6 KV transformer Auxiliary technical questions
  • Ans. 

    The question is about auxiliary technical aspects of transformers.

    • Auxiliary technical aspects include cooling systems, protection devices, and control systems.

    • Examples of auxiliary technical questions could be: What type of cooling system is used in the transformers? What protection devices are installed? How are the control systems designed?

    • Answers should provide details about the specific auxiliary technical aspects

  • Answered by AI
  • Q2. Wate is the C T and P T and gokul Relay and over had Tank all transformer Auxiliary question
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the procedure for selection of material, calculations and realtime experience on projects.
  • Ans. 

    The procedure for material selection, calculations, and real-time experience in projects involves thorough research, analysis, and testing.

    • Research different materials based on project requirements and constraints

    • Perform calculations to determine material properties, dimensions, and feasibility

    • Conduct tests and simulations to validate material selection and design choices

    • Gain real-time experience through hands-on proje...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Técnicas Reunidas Electrical Engineer interview:
  • AutoCAD
  • ETAP
  • REVIT
Interview preparation tips for other job seekers - Questions based on your CV only. Be sure what you mentioned in the profile should be know atleast 75%of knowledge.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. As per company policy requirement condition
Round 3 - HR 

(1 Question)

  • Q1. As per company policy requirement
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Pvsyst losses, cable sizing, fuse derating

I applied via Naukri.com and was interviewed in Jan 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Electrical Safety ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Best Organisation for interview skills

I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Substation questions
  • Q2. Primary engineering questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company to work for so give your best try to get done
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Oct 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Oil & gas Marjan increments
Round 3 - Technical 

(1 Question)

  • Q1. Oil & gsa Marjan increment project
Round 4 - Technical 

(1 Question)

  • Q1. Oil & gas Marjan increment project pkj 6 KSA
Round 5 - Technical 

(1 Question)

  • Q1. Oil & gas Marjan project KSA

Interview Preparation Tips

Interview preparation tips for other job seekers - Please sir give me a one chance sir ur very thanks
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be honest with your years of experience. All information you share will be verified at the time of joining.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is the procedure for selection of material, calculations and realtime experience on projects.
  • Ans. 

    The procedure for material selection, calculations, and real-time experience in projects involves thorough research, analysis, and testing.

    • Research different materials based on project requirements and constraints

    • Perform calculations to determine material properties, dimensions, and feasibility

    • Conduct tests and simulations to validate material selection and design choices

    • Gain real-time experience through hands-on proje...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Técnicas Reunidas Electrical Engineer interview:
  • AutoCAD
  • ETAP
  • REVIT
Interview preparation tips for other job seekers - Questions based on your CV only. Be sure what you mentioned in the profile should be know atleast 75%of knowledge.

Nasser S. Al Hajri Corporation Interview FAQs

How many rounds are there in Nasser S. Al Hajri Corporation Electrical Engineer interview?
Nasser S. Al Hajri Corporation interview process usually has 2 rounds. The most common rounds in the Nasser S. Al Hajri Corporation interview process are Resume Shortlist and One-on-one Round.

Tell us how to improve this page.

Nasser S. Al Hajri Corporation Electrical Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Nasser S. Al Hajri Corporation Electrical Engineer Salary
based on 39 salaries
₹5.9 L/yr - ₹17.2 L/yr
120% more than the average Electrical Engineer Salary in India
View more details

Nasser S. Al Hajri Corporation Electrical Engineer Reviews and Ratings

based on 18 reviews

4.1/5

Rating in categories

4.5

Skill development

3.2

Work-life balance

2.8

Salary

4.0

Job security

2.8

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 18 Reviews and Ratings
Piping Supervisor
72 salaries
unlock blur

₹4 L/yr - ₹15.9 L/yr

Piping Engineer
63 salaries
unlock blur

₹5.7 L/yr - ₹18 L/yr

Planning Engineer
42 salaries
unlock blur

₹4 L/yr - ₹15.5 L/yr

Safety Officer
42 salaries
unlock blur

₹5.7 L/yr - ₹14.2 L/yr

Electrical Engineer
39 salaries
unlock blur

₹5.9 L/yr - ₹17.2 L/yr

Explore more salaries
Compare Nasser S. Al Hajri Corporation with

Larsen & Toubro Limited

4.0
Compare

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

Adani Group

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview