Ashoka Buildcon Interview Questions, Process, and Tips

The question is about the specifications of different layers in a flexible pavement.

• The embankment layer has a thickness of 3m and is compacted at 95% with large size soil particles and effective CBR as per design.

• The subgrade layer has a total thickness of 500mm and is compacted at 97% with large size soil particles and effective CBR as per design.

• The GSB layer has a total thickness of 300mm and is a mixture of aggreg...read more

Design procedure for laying M15 grade concrete with specific requirements for cement content, compressive strength, and compaction.

• Use M15 grade concrete with aggregate and cement ratio of 1:2

• Minimum cement content of 150kg per cum, or 120kg per cum if flyash is more than 20%

• Ensure compressive strength of 10MPA after 7 days curing, with no sample below 7.5MPA

• Ensure DLC premix batching plant material is homogeneous and ...read more

Design procedure for PQC using M40 grade concrete

• Minimum cement content of 360kg per cum

• Flexural strength of 4.5MPA and compressive strength of 40MPA after 28-day curing

• Dowel bars and tie bars provided for load transfer and prevention of cracking and deflection

• PQC mix prepared in pre-mix batching plant and transported to site

• Separation membrane and texturing and sawing operations performed for proper finishing

• 28-day cu...read more

Different types of carriage way include single lane, multilane, intermediate lane, two lane, three lane, and four lane.

• Single lane has a width of 3.75m

• Multilane has a width of 3.50m

• Intermediate lane has a width of 5.5m

• Two lane has a width of 7.5m

• Three lane has a width of 10.50m

• Four lane has a width of 7.5m + 7.5m

Embankment is a raised bank or wall built to carry a road or to hold back water.

• Embankment is a raised structure made of earth or other materials to support a road or railway.

• Earthwork process involves moving, processing, and placing soil or rock to create embankments, excavations, or other earth structures.

• Embankments are commonly used in road construction to elevate the road above the surrounding terrain.

• Earthwork pr...read more

PQC laying stands for Pavement Quality Concrete laying, which is the final layer of concrete pavement on roads.

• PQC laying is the process of laying the final layer of concrete pavement on roads.

• It is done after the base and sub-base layers have been prepared and compacted.

• PQC laying ensures a smooth and durable surface for vehicles to travel on.

• Proper curing of PQC is essential to prevent cracks and ensure longevity.

• Exa...read more

RCC drain is a reinforced concrete drain used for efficient drainage of rainwater or wastewater.

• RCC drain is made of reinforced concrete to provide strength and durability.

• It is used to efficiently channel rainwater or wastewater away from roads, buildings, or other structures.

• RCC drains come in various shapes and sizes depending on the specific drainage requirements.

• These drains are commonly used in urban areas to pre...read more

Kerb laying is the process of installing and positioning curbs along the edges of roads or pavements.

• Kerb laying involves setting out the alignment and levels for the curbs.

• The curbs are then placed and fixed in position using concrete or other suitable materials.

• Kerb laying helps define the edges of roads, provide structural support, and prevent vehicles from driving off the road.

• Properly laid curbs enhance the overal...read more

Kerb painting and road marking are techniques used to designate specific areas on roads for various purposes.

• Kerb painting involves painting the edges of the road, usually in a specific color, to indicate parking restrictions, loading zones, or pedestrian crossings.

• Road marking includes painting lines, symbols, and signs on the road surface to guide traffic, indicate lanes, show pedestrian crossings, and warn of hazard...read more

Finalizing CTC involves considering various factors like cost of living, market rates, company budget, and employee qualifications.

• Consider cost of living in the location of posting

• Compare market rates for similar positions in the area

• Ensure the CTC fits within the company's budget constraints

• Take into account the qualifications and experience of the employee

• Negotiate if necessary to reach a mutually beneficial CTC

I am a motivated and detail-oriented individual with a background in business consulting and a passion for problem-solving.

• Background in business consulting

• Strong problem-solving skills

• Motivated and detail-oriented

• Excellent communication skills

• Experience working in cross-functional teams

Developed a project management tool for tracking tasks and deadlines

• Implemented user-friendly interface for easy task management

• Integrated calendar feature for scheduling deadlines

• Generated reports for tracking project progress

• Utilized agile methodology for project development