10+ Ashoka Buildcon Senior Project Manager Interview Questions & Answers | Complete Prep Guide 2025

Ashoka Buildcon Senior Project Manager Interview Experiences

1 interview found

Senior Project Manager Interview Questions & Answers

Anonymous

posted on 12 Sep 2022

Round 1 - Technical

(14 Questions)

Q1. Two types road 1 Flexible pavement 2 Rigid pavement Before new project start Surveying, NGL,Encroachment , OGL

Add your answer

Q2. Flexible pavement:- 1:- EMBANKMENT:- Take thicknesses 3m approximately as per site conditions 95% compaction 1:- large size soil particles 75mm lumps and cloud. Liquid limit <50%, plastic limit<25% Swel...

Ans.

The question is about the specifications of different layers in a flexible pavement.

The embankment layer has a thickness of 3m and is compacted at 95% with large size soil particles and effective CBR as per design.
The subgrade layer has a total thickness of 500mm and is compacted at 97% with large size soil particles and effective CBR as per design.
The GSB layer has a total thickness of 300mm and is a mixture of aggreg...

Answered by AI

Add your answer

Q3. Emulsion:- Prime coat:- low viscous cut back bitumen on wmm surfaces area and filling pores and void. Tackcoat:- Light application bitumen , asphalt, emulsion and diluted water on wmm surfaces area.

Add your answer

Q4. DBM:- it total thickness of 150mm compacted two layer 75mm and 75mm It mix with aggregate 20mm to 28mm and bitumen VG30 GRADE.apply on si

Add your answer

Q5. Tackcoat;- light application bitumen, asphalt,emulsion and dilute water on DBM Surfaces area. BC:- It is total thickness of 50mm compacted ,aggregate size 13.1mm and bitumen VG30 grade on DBM. Seal co...

Add your answer

Q6. Laying of bitumen concete. :-130 degree celceious to 150 degree celceious. Rolling on bitumen concete :-80 degree celceious 100 degree celceious

Add your answer

Q7. Rigid pavements:- 1 :- DLC= 150MM 2:-PQC = 300MM

Add your answer

Q8. DLC:-Material sutabilitey 1:- Aggregate size 26.5 mm 2:- water absorption max2% 3:- Soundness test Naso4 - 12% Mgso4-18% 4:- Angle of abr...

Add your answer

Q9. DESINGN PROCEDURE :- 1:- Use M15 grade concrete. Aggregate and cement ratio 1:2 2:- The minimum cement content 150kg percum. If flayash is more than 20% the minimum cement contents 120 kg percum. 3:- T...

Ans.

Design procedure for laying M15 grade concrete with specific requirements for cement content, compressive strength, and compaction.

Use M15 grade concrete with aggregate and cement ratio of 1:2
Minimum cement content of 150kg per cum, or 120kg per cum if flyash is more than 20%
Ensure compressive strength of 10MPA after 7 days curing, with no sample below 7.5MPA
Ensure DLC premix batching plant material is homogeneous and ...

Answered by AI

Add your answer

Q10. PQC:- Material sutabilitey 1:- Aggregate size 31.5mm Material sutabilitey of pqc from Soundness test to sand equivalent

Add your answer

Q11. Design procedure of PQC:- Use M40 grade concrete. 1:- The minimum cement content 360kg percum. If flyash more than 20% the minimum cement contents 310 kg percum. 2:-The flexuar strength of cement ...

Ans.

Design procedure for PQC using M40 grade concrete

Minimum cement content of 360kg per cum
Flexural strength of 4.5MPA and compressive strength of 40MPA after 28-day curing
Dowel bars and tie bars provided for load transfer and prevention of cracking and deflection
PQC mix prepared in pre-mix batching plant and transported to site
Separation membrane and texturing and sawing operations performed for proper finishing
28-day cu...

Answered by AI

View 1 more answer

Q12. DIFFERENT TYPES OF CARRIAGE WAY 1 :- Single lane- 3.75 m 2:- Multlane;- 3.50m 3:- Inter mediate lane:- 5.5m 4 Two lane :- 7.5 m 5:- Thee lane:- 10.50m 6:- Four lane:- 7.5m+ 7.5m

Ans.

Different types of carriage way include single lane, multilane, intermediate lane, two lane, three lane, and four lane.

Single lane has a width of 3.75m
Multilane has a width of 3.50m
Intermediate lane has a width of 5.5m
Two lane has a width of 7.5m
Three lane has a width of 10.50m
Four lane has a width of 7.5m + 7.5m

Answered by AI

Add your answer

Q13. TYPES CAMBER 1 :- STRIGTH CAMBER 2:- PAROBOLIC CABER 3 STRAIGHT AND PARABOLIC CAMBER cc amber 1 in 50 to 1in60 Bitumen CAMBER 1in40 to 1in 50 camber Wmm camber 1in30 to 1in40

Add your answer

Q14. CBR;- Developed by the California division State of high way to classify and evaluting 1: soil subgrade 2:-GSB CBR-=3% TO 15% Clay=<8% Sand 15% to 35% Gravel >25% THICKNESSES OF PAVEMENT T= (1.75P/...

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - National high way 2 to 4 lane
Expressway way 6 to 8 lane
Minimum right of way 4 lane 6 lane =60M
EXPRESS WAY HAVE MANY SMART AND
INTEILIGENT FEATURS
HTMS = high traffic management system
VIDS=visual incident deduction system0
Expressway advance features to lays
1;- Excess ramp
2:-Line divder
3:- Grade separation
4;- Elevated section
Expressway is no multiple lane
4 lane cast = 8 to 10 core rupees/ km
6 lane coast = 14 core rs / km

Top trending discussions

View All

Interview Tips & Stories

5d (edited)

timepasstiwari

A Digital Markter

Got Rejected In an Interview, Just Because I Didn’t Answer a Personal Question

So, I got invited for this interview, and they told me to be there at 9 AM. Of course, I get there early, like 8:30, because I don't want to be late. But then I end up waiting for 1.5 hours... read more

Got a question about Ashoka Buildcon?

Ask anonymously on communities.

Interview questions from similar companies

Senior Project Manager Interview Questions & Answers

Nagarjuna Construction Company

posted on 13 Feb 2023

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

Selected

I applied via Company Website and was interviewed before Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - Technical

(3 Questions)

Q1. Why we are use lap in centre of column or Zone B?

Ans.

Lap is used in the center of a column or Zone B for structural stability and reinforcement.

Lap joints provide additional strength and stability to the column.
They help in distributing the load evenly across the column.
Lap joints prevent the column from cracking or failing under heavy loads.
Zone B is a critical area where the maximum bending moment occurs, and lap joints help in reinforcing this zone.
By using lap in the...

Answered by AI

View 1 more answer

Q2. Where are construction joint is provide in simply supported slab?

Ans.

Construction joints are provided at mid-span of simply supported slabs.

Construction joints are provided to allow for differential movement between adjacent sections of the slab.
They are typically located at mid-span of the slab, where the bending moment is zero.
The joint should be designed to transfer shear and moment between the two sections of the slab.
Proper reinforcement detailing is necessary to ensure the joint f...

Answered by AI

Add your answer

Q3. L/6 or L/ 3 where L is sapan of slab

Ans.

L/6 or L/3 is the ratio used to determine the maximum allowable deflection of a slab.

L/6 is used for residential buildings while L/3 is used for commercial buildings.
The ratio determines the maximum amount of deflection that a slab can have without causing damage or discomfort to occupants.
For example, if the span of a slab is 12 feet, the maximum allowable deflection for a residential building would be 2 inches (12/6)...

Answered by AI

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - If you are doing your job with practical experience then no worries about any interview

Senior Project Manager Interview Questions & Answers

Larsen & Toubro Limited

Anonymous

posted on 1 Mar 2023

Interview experience

Excellent

Difficulty level

Process Duration

Result

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - Technical

(3 Questions)

Q1. DDUGJY Project;- 33/11 KV New PSS ,33 KV Line ,11 KV Line and LT Line

Ans. Rerea of New PSS 60*40 mtr control room 1700 sqft road 60 mtr width 3.75 mtr footpath 15 mtr , fencing 40 mtr cable trench 130 mtr , 2 no 5 MVA PTR, 800Amp VCB and 800 Amp rating isolator in switch yards area. cost of civil work by sub cotractor 1.15 cr and electrical work 9.85 lac.

Answered Anonymously

Add your answer

Q2. RGGVY 12th Plan , HVDS Project, and Segrigation

Add your answer

Q3. ADB Project 33/11 KV New PSS R&M 33&11 KV line LT Line

Add your answer

Round 3 - HR

(1 Question)

Q1. Final negotiation of salary

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Please consider as per work profile in electrical feild

Senior Project Manager Interview Questions & Answers

Larsen & Toubro Limited

Anonymous

posted on 14 Sep 2023

Interview experience

Good

Difficulty level

Process Duration

Result

Selected

I applied via Recruitment Consulltant

Round 1 - Assignment

Project Management , Production Management and HSE

Round 2 - HR

(1 Question)

Q1. Very understanding and initiate. Motivated HR Department

Add your answer

Round 3 - Case Study

Deeply interested in RR PACKAGE

Round 4 - Group Discussion

Well. We used to do everyday

Interview Preparation Tips

Interview preparation tips for other job seekers - Thakur Sir, ♥️ has recommended for this job. I did my best to GREPL. If he allows will do more in this regard.

Project Manager Interview Questions & Answers

Larsen & Toubro Limited

Anonymous

posted on 9 Feb 2022

I applied via Naukri.com and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - HR

(4 Questions)

Q1. What are your salary expectations?

Add your answer

Q2. Share details of your previous job.

Add your answer

Q3. Why are you looking for a change?

Add your answer

Q4. Tell me about yourself.

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - JUST BE CONFIDENT THEY ARE LOOKING FOR CANDIDATE WHO HAVE GOOD DECISION MAKING POWER.

Senior Engineer Interview Questions & Answers

Larsen & Toubro Limited

Anonymous

posted on 11 Jun 2022

I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Aptitude Test

Mathematics, English, Reasoning

Round 2 - Technical

(2 Questions)

Q1. They asked Technical questions

Add your answer

Q2. What is antenna What is satcom

Ans.

An antenna is a device that converts electrical signals into electromagnetic waves and vice versa. Satcom is short for satellite communication.

Antennas are used for transmitting and receiving signals in various applications such as radio, television, and wireless communication.
Satcom refers to the use of satellites for communication purposes, including television broadcasting, internet access, and military communicatio...

Answered by AI

Add your answer

Round 3 - Group Discussion

Clean India
Corruption

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and believe in yourself

Senior Engineer Interview Questions & Answers

Larsen & Toubro Limited

Anonymous

posted on 14 Jul 2021

Interview Questionnaire

1 Question

Q1. What is your role in previous company

Add your answer

Senior Engineer Interview Questions & Answers

Nagarjuna Construction Company

Anonymous

posted on 30 Aug 2021

I applied via Recruitment Consultant and was interviewed before Aug 2020. There were 5 interview rounds.

Interview Questionnaire

1 Question

Q1. Machinery maintenance Dpr maintenance,local purchasing,

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice,good and teritical intrew done and completed

Senior Engineer Interview Questions & Answers

Nagarjuna Construction Company

Anonymous

posted on 4 May 2019

Interview Questionnaire

3 Questions

Q1. Basically questions related to power distribution field & some of college courses.

Add your answer

Q2. In this round questions basically related to management & technical composition.

Add your answer

Q3. He only asked your previous n current financial requirements as per your interview.

Add your answer

Senior Engineer Interview Questions & Answers

Larsen & Toubro Limited

Shveta Gupta

posted on 10 Sep 2015

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

Ashoka Buildcon Interview FAQs

How many rounds are there in Ashoka Buildcon Senior Project Manager interview?

Ashoka Buildcon interview process usually has 1 rounds. The most common rounds in the Ashoka Buildcon interview process are Technical.

How to prepare for Ashoka Buildcon Senior Project Manager interview?

Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Ashoka Buildcon. The most common topics and skills that interviewers at Ashoka Buildcon expect are Billing, Civil Project Management, Construction Project Management, Design and Project Execution.

What are the top questions asked in Ashoka Buildcon Senior Project Manager interview?

Some of the top questions asked at the Ashoka Buildcon Senior Project Manager interview -

Design procedure of PQC:- Use M40 grade concrete. 1:- The minimum cement c...read more
DESINGN PROCEDURE :- 1:- Use M15 grade concrete. Aggregate and cement ratio 1...read more
Flexible pavement:- 1:- EMBANKMENT:- Take thicknesses 3m approximately as per s...read more

Engineer 199 salaries	₹0 L/yr - ₹0 L/yr
Senior Engineer 145 salaries	₹0 L/yr - ₹0 L/yr
Store Keeper 80 salaries	₹0 L/yr - ₹0 L/yr
Site Engineer 77 salaries	₹0 L/yr - ₹0 L/yr
Civil Engineer 77 salaries	₹0 L/yr - ₹0 L/yr

Ashoka Buildcon Senior Project Manager Interview Questions, Process, and Tips

Ashoka Buildcon Senior Project Manager Interview Experiences

1 interview found

(14 Questions)

Interview Preparation Tips

Interview questions from similar companies

(3 Questions)

Interview Preparation Tips

(3 Questions)

(1 Question)

Interview Preparation Tips

(1 Question)

Interview Preparation Tips

(4 Questions)

Interview Preparation Tips

(2 Questions)

Interview Preparation Tips

Interview Questionnaire

1 Question

Interview Questionnaire

1 Question

Interview Preparation Tips

Interview Questionnaire

3 Questions

Interview Preparation Tips

Ashoka Buildcon Interview FAQs

Recently Viewed

Fujitsu

VIKRAN Engineering & Exim

Fujitsu

Sutherland Global Services

Patel Infrastructure

ASC Infratech

Larsen & Toubro Limited

Optum Global Solutions

Royal Infraconstru

VIKRAN Engineering & Exim

Tell us how to improve this page.

Ashoka Buildcon Interviews By Designations

Interview Questions for Popular Designations

Interview Questions from Similar Companies