Filter interviews by
I applied via Campus Placement and was interviewed in Jan 2024. There were 3 interview rounds.
Easy aptitude test with basic questions
I was interviewed before Dec 2023.
I applied via Walk-in and was interviewed in Oct 2023. There was 1 interview round.
Heat exchangers are designed according to specific codes and standards to ensure safety and efficiency.
Heat exchangers are typically designed according to codes such as ASME, TEMA, and API.
These codes provide guidelines for materials, construction, testing, and inspection of heat exchangers.
For example, ASME Boiler and Pressure Vessel Code provides rules for the design and construction of pressure vessels including hea
Cooling tower design parameters include airflow rate, water flow rate, temperature range, and materials used.
Airflow rate is crucial for heat transfer efficiency.
Water flow rate determines the cooling capacity of the tower.
Temperature range affects the performance of the tower.
Materials used should be corrosion-resistant and durable.
Examples: Fiberglass reinforced plastic (FRP), galvanized steel, stainless steel.
Pressure vessel design codes are standards that provide guidelines for the design, fabrication, inspection, and testing of pressure vessels.
Common pressure vessel design codes include ASME Boiler and Pressure Vessel Code, EN 13445, and PD 5500.
Design codes ensure that pressure vessels are safe, reliable, and meet regulatory requirements.
Engineers must follow the specific requirements outlined in the chosen design code ...
Performing a USFDA audit involves thorough preparation, documentation review, facility inspection, and communication with auditors.
Prepare by reviewing all relevant documentation and ensuring compliance with USFDA regulations
Conduct a thorough inspection of the facility to ensure cleanliness, organization, and adherence to regulations
Communicate effectively with auditors, providing clear and concise responses to their ...
Aarti Industries interview questions for popular designations
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.
I have 10 years of experience in executive maintenance engineering.
I have been working in the field of executive maintenance engineering for the past 10 years.
During my career, I have gained extensive experience in managing and overseeing maintenance operations.
I have successfully implemented preventive maintenance programs and optimized equipment performance.
I have also trained and supervised maintenance staff, ensuri...
Yes, I am ready to travel or relocate for the position of Executive Maintenance Engineer.
I am open to traveling or relocating for work.
I understand that this position may require me to work at different locations or move to a different city or country.
I am flexible and adaptable to new environments.
I have previous experience of traveling or relocating for work.
I am willing to make the necessary arrangements to ensure a
I am currently located in New York City.
I am based in the bustling city of New York.
My current location is in the heart of Manhattan.
I am situated in the vibrant and diverse city of New York City.
I expect a competitive salary that reflects my experience and the responsibilities of the role.
Research the average salary range for Executive Maintenance Engineers in your industry and location.
Consider your years of experience, qualifications, and any specialized skills you bring to the role.
Factor in the responsibilities and scope of the position.
Be prepared to negotiate and discuss benefits and perks in addition to...
We are a team of experienced maintenance engineers with expertise in executive-level management.
Experienced maintenance engineers
Expertise in executive-level management
Strong problem-solving skills
Effective communication and leadership abilities
Proven track record of successfully managing maintenance operations
Ability to prioritize tasks and meet deadlines
In-depth knowledge of maintenance procedures and equipment
Experi...
I am currently not working due to a recent company-wide downsizing.
Company underwent downsizing resulting in my position being eliminated
I was laid off due to budget constraints
The company restructured and my role was no longer needed
I don't have the available data
I left my last company due to limited growth opportunities and a desire for new challenges.
Limited growth opportunities
Desire for new challenges
I don't have the available data.
Yes, my performance is well.
I consistently meet or exceed performance targets.
I have received positive feedback from supervisors and colleagues.
I have successfully completed several complex projects on time and within budget.
I have implemented cost-saving measures that improved efficiency.
I have a track record of resolving maintenance issues quickly and effectively.
Our company specializes in manufacturing and distributing industrial machinery and equipment.
We produce a wide range of machinery and equipment for various industries such as manufacturing, construction, and energy.
Some of our products include industrial robots, conveyor systems, power generators, and hydraulic presses.
We also offer maintenance and repair services for the equipment we manufacture.
Our products are known...
I have handled a wide range of equipment in my role as an Executive Maintenance Engineer.
Electrical equipment such as generators, transformers, and switchgear
Mechanical equipment including pumps, compressors, and motors
HVAC systems and controls
Industrial machinery like conveyors, mixers, and packaging equipment
Instrumentation devices such as pressure gauges, flow meters, and temperature sensors
Computerized maintenance ...
1 Torr is equal to 0.9999998571428571 mm of Hg.
1 Torr is a unit of pressure equal to 1/760th of standard atmospheric pressure.
mm of Hg is a unit of pressure commonly used in the medical field.
The conversion factor between Torr and mm of Hg is approximately 0.9999998571428571.
759 mm of hg is a measurement of atmospheric pressure.
759 mm of hg refers to the height of a column of mercury in a barometer.
It is commonly used to measure atmospheric pressure.
At sea level, the average atmospheric pressure is around 760 mm of hg.
A decrease in atmospheric pressure may indicate the approach of a storm or low-pressure system.
An increase in atmospheric pressure may indicate fair weather or the presence o
Vacuum in a steam ejector is created through the principle of steam jet compression.
Steam ejectors use high-pressure steam to create a low-pressure environment.
The steam enters the ejector through a nozzle, creating a high-velocity jet.
This high-velocity jet entrains and compresses the surrounding gas or vapor.
The entrained gas or vapor is then condensed, resulting in a vacuum.
The condensed gas or vapor is discharged, ...
Yes, I looked after boilers during my shifts as an Executive Maintenance Engineer.
Yes, I was responsible for inspecting and maintaining boilers during my shifts.
I regularly checked boiler pressure, temperature, and fuel levels to ensure optimal performance.
I performed routine maintenance tasks such as cleaning and replacing worn-out parts.
I also responded to any boiler-related issues or emergencies that occurred during...
Yes, an AHU stands for Air Handling Unit. It is a device used to regulate and circulate air as part of a heating, ventilation, and air conditioning (HVAC) system.
AHU stands for Air Handling Unit
It is used in HVAC systems to regulate and circulate air
AHUs typically consist of a fan, heating and cooling coils, filters, and dampers
They are commonly found in commercial buildings, hospitals, and industrial facilities
Parameters for a cubical include dimensions, material, color, and functionality.
Dimensions: Length, width, and height of the cubical.
Material: The material used to construct the cubical, such as wood, metal, or glass.
Color: The color or finish of the cubical.
Functionality: Features and components of the cubical, such as shelves, drawers, or doors.
Class of air refers to the classification of air based on its cleanliness and purity.
Class of air is determined by the concentration of particles and microorganisms present in the air.
There are different classes of air based on specific industry standards and requirements.
Examples of air classes include Class 100, Class 10,000, and Class 100,000.
Each class has defined limits for particle size and count, as well as micr...
Some common problems related to centrifugal pumps include cavitation, impeller damage, and seal leakage.
Cavitation: This occurs when the pressure in the pump drops below the vapor pressure of the liquid, causing the formation of vapor bubbles. It can lead to erosion, noise, and reduced pump efficiency.
Impeller damage: High-speed rotation of the impeller can cause erosion, corrosion, or imbalance, leading to reduced per...
Shaft run out can be resolved by identifying the root cause, performing corrective actions, and conducting regular maintenance.
Identify the root cause of the shaft run out issue, such as misalignment, worn bearings, or bent shaft.
Perform corrective actions based on the root cause, such as realigning the shaft, replacing worn bearings, or repairing the bent shaft.
Conduct regular maintenance to prevent future occurrences...
I expect a salary that is competitive and reflective of my experience and qualifications.
Research the average salary range for Executive Maintenance Engineers in your industry and location.
Consider your years of experience, level of education, and any specialized skills or certifications you possess.
Be prepared to negotiate and discuss benefits and perks in addition to salary.
Avoid giving a specific number unless press...
I am expecting a competitive package that reflects my skills, experience, and the responsibilities of the role.
I am looking for a package that is in line with industry standards and the market rate for similar positions.
I would like the package to include benefits such as health insurance, retirement plans, and paid time off.
Considering my qualifications and the level of responsibility associated with the role, I expec...
Get interview-ready with Top Aarti Industries Interview Questions
I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 4 interview rounds.
I worked at XYZ Company, a manufacturing firm specializing in automotive components.
Responsible for conducting preventive maintenance on production machinery
Troubleshoot and repair mechanical issues on equipment
Collaborated with production team to ensure minimal downtime
Implemented new maintenance procedures to improve efficiency
Yes, I am willing to relocate or commute daily for the job.
I am open to relocating for the right opportunity.
I am willing to commute daily if necessary.
I understand the importance of flexibility in the job market.
I have handled a wide range of equipment in my role as a Mechanical Maintenance Engineer.
Pumps and compressors
Conveyors and material handling equipment
Boilers and heat exchangers
HVAC systems
Generators and power distribution systems
Machine tools and production equipment
Hydraulic and pneumatic systems
Crane and lifting equipment
Instrumentation and control systems
When opening a centrifugal pump, it is important to follow proper procedures to ensure safety and prevent damage.
Before opening the pump, ensure that it is isolated from the power source and all pressure has been relieved.
Inspect the pump for any signs of damage or wear, such as leaks, cracks, or excessive vibration.
Check the pump's impeller and casing for any debris or blockages that may affect its performance.
If nece...
Vacuum is created in a steam ejector through the principle of jet propulsion.
Steam ejectors use high-pressure steam to create a low-pressure environment.
The steam enters the nozzle of the ejector and expands, creating a high-velocity jet.
This high-velocity jet entrains and compresses the surrounding gas or vapor, reducing its pressure.
The entrained gas or vapor is then discharged through the diffuser, creating a vacuum...
1 torr is equal to 0.03937 mm of Hg.
1 torr is a unit of pressure equal to 1/760th of standard atmospheric pressure.
mm of Hg is a unit of pressure commonly used in vacuum systems.
To convert torr to mm of Hg, multiply by 0.03937.
Example: 1 torr = 1 * 0.03937 mm of Hg = 0.03937 mm of Hg.
759 mm of hg is a unit of pressure measurement.
mm of hg is a common unit used to measure pressure.
759 mm of hg is equivalent to 1012.8 millibars or 14.1 pounds per square inch (psi).
It is often used in meteorology to measure atmospheric pressure.
In mechanical maintenance, it can be used to monitor pressure in systems or equipment.
For example, if a pressure gauge reads 759 mm of hg, it indicates the pressure exerted by
In a clean room area, parameters observed include air quality, temperature, humidity, particle count, and pressure differentials.
Air quality is monitored to ensure low levels of contaminants.
Temperature is controlled to maintain a stable environment for sensitive equipment.
Humidity levels are regulated to prevent moisture-related issues.
Particle count is measured to ensure cleanliness and prevent contamination.
Pressure...
Mechanical seal types include cartridge seals, component seals, and bellows seals.
Cartridge seals are pre-assembled units that are easy to install and replace.
Component seals are made up of separate rotating and stationary parts.
Bellows seals use a flexible metal bellows to provide a dynamic seal.
A distillation column is a vertical tower used in chemical processes to separate mixtures based on their boiling points.
Distillation column is used in industries such as oil refining, petrochemicals, and chemical manufacturing.
It works on the principle of heating a mixture to vaporize the more volatile components and then condensing them back into liquid form.
The column consists of trays or packing materials that provi...
Types of Reaction
Chemical reactions can be classified into several types based on the changes that occur during the reaction.
Common types of reactions include synthesis, decomposition, combustion, displacement, and redox reactions.
Synthesis reactions involve the combination of two or more substances to form a new compound.
Decomposition reactions involve the breakdown of a compound into its constituent elements or simpl...
Open Loop is a control system where the output has no effect on the input or control action.
Open Loop is a one-way communication system.
It does not use feedback to adjust the output.
The output is predetermined and does not change based on the input.
Examples include a toaster, where the heating element operates for a fixed time regardless of the toast's actual doneness, or a traffic signal that follows a fixed timing pa
Change of reaction refers to the alteration in response or behavior due to a stimulus or event.
Change of reaction is a psychological concept that involves a shift in response or behavior.
It occurs when an individual's reaction to a particular stimulus or event changes over time.
This change can be influenced by various factors such as experience, learning, or external influences.
For example, if someone initially reacts ...
Hydrogen gas is a colorless, odorless, and highly flammable gas.
Hydrogen gas is the lightest and most abundant element in the universe.
It is commonly used as a fuel in various industries, including transportation and energy production.
Hydrogen gas can be produced through various methods, such as electrolysis of water or steam reforming of natural gas.
It is used in the production of ammonia, methanol, and other chemical...
I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.
I applied via Walk-in and was interviewed in Apr 2024. There was 1 interview round.
Shuttering in expansion joint columns is done by providing proper gaps to accommodate movement. M30 mix ratio is 1:1:2. How to calculate cutting length with deductions. Concrete strength after 14 days.
Shuttering in expansion joint columns involves providing gaps to allow for movement
M30 design mix ratio is 1:1:2 (1 part cement, 1 part sand, 2 parts aggregate)
To calculate cutting length, deduct the cover, half of the di...
Top trending discussions
The duration of Aarti Industries interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 253 interviews
Interview experience
based on 2.8k reviews
Rating in categories
Assistant Manager
608
salaries
| ₹4.5 L/yr - ₹12.6 L/yr |
Deputy Manager
578
salaries
| ₹6.7 L/yr - ₹17.5 L/yr |
Executive
527
salaries
| ₹2.2 L/yr - ₹7.7 L/yr |
Plant Operator
339
salaries
| ₹1.6 L/yr - ₹5.2 L/yr |
Senior Executive
322
salaries
| ₹3.3 L/yr - ₹10.3 L/yr |
Vinati Organics
Atul
Navin Fluorine International
Solvay Specialities