Upload Button Icon Add office photos

Aarti Industries

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Aarti Industries Executive Production Interview Questions, Process, and Tips

Updated 21 Jun 2024

Top Aarti Industries Executive Production Interview Questions and Answers

View all 15 questions

Aarti Industries Executive Production Interview Experiences

6 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is distillation
  • Ans. 

    Distillation is a process of separating components of a liquid mixture based on differences in boiling points.

    • Distillation involves heating the liquid mixture to create vapor, then cooling the vapor to condense it back into liquid form.

    • The components with lower boiling points will vaporize first and be collected, leaving behind components with higher boiling points.

    • Examples of distillation include the production of alc...

  • Answered by AI
  • Q2. How to calculate npsh
  • Ans. 

    NPSH (Net Positive Suction Head) can be calculated by subtracting the vapor pressure of the liquid from the total suction head.

    • Calculate the total suction head (TSH) by adding the atmospheric pressure, the pressure head at the surface of the liquid, and the velocity head.

    • Determine the vapor pressure of the liquid at the operating temperature and pressure.

    • Subtract the vapor pressure from the total suction head to get th

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Technical related Experience
Round 2 - One-on-one 

(1 Question)

  • Q1. Education Experience and Technical
Round 3 - HR 

(1 Question)

  • Q1. Ctc break up and Expected

Executive Production Interview Questions Asked at Other Companies

Q1. What was your position in previous and draw an organogram showing ... read more
Q2. What is fullform of terms Hvac,cFU, cfm, acph and hepa, Laf
Q3. What is the principle of multi mill
Q4. What is DCS ? How we handle continuous process through DCS.
Q5. How many compression machine in your company

I applied via Naukri.com and was interviewed in Jun 2021. There were 3 interview rounds.

Interview Questionnaire 

11 Questions

  • Q1. What is polar and non polar slovent?
  • Ans. 

    Polar solvents have a positive and negative end, while nonpolar solvents have no charge.

    • Polar solvents dissolve polar solutes and nonpolar solvents dissolve nonpolar solutes.

    • Water is a polar solvent, while oil is a nonpolar solvent.

    • Polarity is determined by the electronegativity difference between atoms in a molecule.

  • Answered by AI
  • Q2. What is your job responsibilities?
  • Q3. What is fire extinguisher.its classes
  • Ans. 

    A fire extinguisher is a device used to control or extinguish small fires. There are different classes of fire extinguishers for different types of fires.

    • Fire extinguishers are classified based on the type of fire they can extinguish.

    • Class A fire extinguishers are used for fires involving ordinary combustibles like wood, paper, or cloth.

    • Class B fire extinguishers are used for fires involving flammable liquids like gaso...

  • Answered by AI
  • Q4. Role of safety valve, rupture disc?
  • Ans. 

    Safety valves and rupture discs are important safety devices in production processes.

    • Safety valves are designed to release excess pressure in a system to prevent explosions or other hazardous situations.

    • Rupture discs are used as a backup to safety valves and are designed to burst at a predetermined pressure to release excess pressure.

    • Both safety valves and rupture discs are critical components in ensuring the safety of...

  • Answered by AI
  • Q5. Heat exchanger design
  • Ans. 

    Heat exchanger design involves selecting appropriate materials, determining heat transfer coefficients, and optimizing flow rates.

    • Consider the type of fluid being used and its properties

    • Choose materials that can withstand the temperature and pressure of the fluids

    • Calculate the heat transfer coefficients for each fluid

    • Optimize the flow rates to maximize heat transfer efficiency

    • Consider the overall size and cost of the h

  • Answered by AI
  • Q6. Material balance &energy balance equation
  • Ans. 

    Material balance and energy balance equations are used to track the flow of materials and energy in a system.

    • Material balance equation is based on the principle of conservation of mass.

    • Energy balance equation is based on the principle of conservation of energy.

    • Material balance equation: Input = Output + Accumulation

    • Energy balance equation: Input = Output + Storage + Losses

    • Example: In a chemical reactor, the material ba...

  • Answered by AI
  • Q7. Heat transfer, modes of heat transfer ?its examples?
  • Ans. 

    Heat transfer occurs in three modes: conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through the movement of fluids or gases.

    • Radiation is the transfer of heat through electromagnetic waves.

    • Examples of conduction include touching a hot stove or iron, while examples of convection include boiling wate...

  • Answered by AI
  • Q8. Bernoullis equation
  • Q9. What is centrifugal force?
  • Ans. 

    Centrifugal force is the apparent force that acts outward on a body moving around a center, arising from the body's inertia.

    • Centrifugal force is not a real force, but rather a perceived force.

    • It is the result of an object's inertia trying to keep it moving in a straight line while it is being forced to move in a circular path.

    • Examples include the feeling of being pushed to the side in a car when turning a corner, or th...

  • Answered by AI
  • Q10. Dryer type?
  • Ans. 

    There are various types of dryers used in production, including rotary dryers, fluidized bed dryers, and spray dryers.

    • Rotary dryers use a rotating drum to dry materials.

    • Fluidized bed dryers use hot air to suspend and dry materials.

    • Spray dryers use a nozzle to spray liquid into a hot air stream, creating a fine powder.

    • Other types of dryers include freeze dryers, vacuum dryers, and paddle dryers.

  • Answered by AI
  • Q11. What is difference between ahu &hvac
  • Ans. 

    AHU is a part of HVAC system. AHU is a device that circulates air while HVAC is a system that controls temperature, humidity and air quality.

    • AHU stands for Air Handling Unit

    • AHU is a part of HVAC system

    • AHU circulates air while HVAC controls temperature, humidity and air quality

    • HVAC stands for Heating, Ventilation and Air Conditioning

    • HVAC is a system that provides thermal comfort and acceptable indoor air quality

    • Examples...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare chemical Engineering basics.
Focus on heat teansfer subject and thermodynamics.

I applied via Recruitment Consultant and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is msds
  • Ans. 

    MSDS stands for Material Safety Data Sheet.

    • MSDS provides information about the hazards of a chemical substance.

    • It includes information on the composition, physical and chemical properties, health and safety hazards, and emergency procedures.

    • MSDS is required by law for all hazardous chemicals used in the workplace.

    • It is important to read and understand the MSDS before using a chemical substance.

    • MSDS is often available o...

  • Answered by AI
  • Q2. How to handling chemicals
  • Ans. 

    Handling chemicals requires proper training, protective gear, and adherence to safety protocols.

    • Wear appropriate personal protective equipment (PPE) such as gloves, goggles, and lab coats

    • Store chemicals properly in designated areas with clear labeling

    • Follow safety protocols and procedures for handling, mixing, and disposing of chemicals

    • Be aware of the hazards associated with each chemical and take necessary precautions

    • ...

  • Answered by AI
  • Q3. What is your job responsibility
  • Q4. How to batch charging
  • Ans. 

    Batch charging is the process of charging multiple devices at once.

    • Use a charging station with multiple ports

    • Ensure the charging station can handle the power requirements of all devices

    • Organize devices by type and charging needs

    • Set a schedule for charging to avoid overloading circuits

    • Consider using smart charging technology to optimize charging speed and efficiency

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Very good for experience knowledge

Skills evaluated in this interview

Aarti Industries interview questions for designations

 Junior Executive Production

 (1)

 Production

 (1)

 Production Supervisor

 (3)

 Production Operator

 (2)

 Executive Production Officer

 (1)

 Deputy Manager Production

 (1)

 Production Shift Incharge

 (1)

 Safety Executive

 (4)

I applied via Walk-in and was interviewed before Dec 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. 1) Generic question related to Personally And 2ndly related to professionally 2) About the family and your area of interest And About the expected package
  • Q2. Tell me some thing about your last organization??
Round 3 - Aptitude Test 

All techinical related to activity and process development.

Round 4 - Group Discussion 

Topic over the lockdown and how the world over come the Crisis.

Interview Preparation Tips

Topics to prepare for Aarti Industries Executive Production interview:
  • What you have done so far
  • Produxtion
  • Hardware
Interview preparation tips for other job seekers - Try untillvyou success and have a trust over to your capability and Ambision box

Get interview-ready with Top Aarti Industries Interview Questions

Interview Questionnaire 

2 Questions

  • Q1. Related instrument, how many I/Os in plant?
  • Q2. How the DG work during power failure?
  • Ans. 

    DG works as a backup power source during power failure.

    • DG stands for Diesel Generator.

    • It automatically starts when there is a power failure.

    • It provides power to essential equipment and systems.

    • It requires regular maintenance and fuel supply.

    • Examples of essential systems powered by DG are elevators, emergency lights, and fire alarms.

  • Answered by AI

Interview questions from similar companies

I applied via Company Website and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Design procedure
  • Ans. 

    Design procedure involves identifying requirements, creating a plan, developing prototypes, testing and refining the final product.

    • Identify requirements and constraints

    • Create a plan and set goals

    • Develop prototypes and test them

    • Refine the final product based on feedback

    • Document the design process and results

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for process design

Skills evaluated in this interview

I applied via Company Website and was interviewed before Oct 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Plant experience, Quality maintain, production planning
Round 3 - One-on-one 

(1 Question)

  • Q1. Safety culture, Plant P& Id
Round 4 - Assignment 

Salary discussion, Family background, working culture

Interview Preparation Tips

Interview preparation tips for other job seekers - Please give experience vise salary due to not allowed our healthy culture to became a low salary
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
-

I applied via Walk-in and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is modes of heat transfer
  • Ans. 

    Modes of heat transfer refer to the ways in which heat can be transferred from one object to another.

    • Conduction: Heat transfer through direct contact between objects (e.g. touching a hot pan)

    • Convection: Heat transfer through the movement of fluids or gases (e.g. boiling water)

    • Radiation: Heat transfer through electromagnetic waves (e.g. feeling the warmth of the sun)

    • Examples: Cooking food on a stove (conduction), heatin...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Basic Technical questions
Round 2 - HR 

(1 Question)

  • Q1. Family Background
Contribute & help others!
anonymous
You can choose to be anonymous

Aarti Industries Interview FAQs

How many rounds are there in Aarti Industries Executive Production interview?
Aarti Industries interview process usually has 2-3 rounds. The most common rounds in the Aarti Industries interview process are HR, Technical and Resume Shortlist.
How to prepare for Aarti Industries Executive Production interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Aarti Industries. The most common topics and skills that interviewers at Aarti Industries expect are Documentation, Operations, API Manufacturing, Bmr and Chemical.
What are the top questions asked in Aarti Industries Executive Production interview?

Some of the top questions asked at the Aarti Industries Executive Production interview -

  1. What is polar and non polar slove...read more
  2. Heat transfer, modes of heat transfer ?its exampl...read more
  3. How the DG work during power failur...read more

Recently Viewed

INTERVIEWS

Aarti Industries

No Interviews

INTERVIEWS

Aarti Industries

No Interviews

INTERVIEWS

Nokia Networks

No Interviews

INTERVIEWS

Capgemini Engineering

No Interviews

INTERVIEWS

Tessolve Semiconductor

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Aarti Industries

No Interviews

INTERVIEWS

Aarti Industries

No Interviews

SALARIES

Tessolve Semiconductor

INTERVIEWS

Aarti Industries

No Interviews

Tell us how to improve this page.

Aarti Industries Executive Production Interview Process

based on 3 interviews

1 Interview rounds

  • Technical Round
View more
Aarti Industries Executive Production Salary
based on 291 salaries
₹2.1 L/yr - ₹8.6 L/yr
11% more than the average Executive Production Salary in India
View more details

Aarti Industries Executive Production Reviews and Ratings

based on 37 reviews

4.1/5

Rating in categories

4.2

Skill development

4.0

Work-life balance

4.0

Salary

4.5

Job security

4.1

Company culture

3.7

Promotions

4.0

Work satisfaction

Explore 37 Reviews and Ratings
Assistant Manager
608 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
579 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
525 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Plant Operator
338 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
321 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aarti Industries with

Vinati Organics

4.0
Compare

Atul

3.9
Compare

Navin Fluorine International

3.9
Compare

Solvay Specialities

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent