Upload Button Icon Add office photos

Aarti Industries

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Aarti Industries Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 5 Nov 2024

Aarti Industries Graduate Engineer Trainee (Get) Interview Experiences

6 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Oct 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What is Heat of formation
  • Ans. 

    Heat of formation is the energy released or absorbed when one mole of a compound is formed from its elements in their standard states.

    • Heat of formation is also known as standard enthalpy of formation.

    • It is typically measured in units of kJ/mol.

    • Negative heat of formation indicates exothermic reaction, while positive heat of formation indicates endothermic reaction.

    • For example, the heat of formation of water (H2O) is -28

  • Answered by AI
  • Q2. What is heat of reaction
  • Ans. 

    Heat of reaction is the amount of heat released or absorbed during a chemical reaction.

    • Heat of reaction can be exothermic (heat released) or endothermic (heat absorbed).

    • It is typically measured in units of joules or calories.

    • Examples include combustion reactions releasing heat and photosynthesis reactions absorbing heat.

  • Answered by AI
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Reasoning

Round 3 - Technical 

(1 Question)

  • Q1. Pump related quesstion , project related question , zero order reaction examples , distillation types etc

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare well of core subjects like mass transfer, chemical reaction engineering etc
first they will ask for introduction , then they go through from your resume and ask project related question. Specifical read about steam distillation and its examples , zero order and 1 order reaction examples and be confident during the interview

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

I applied via Campus Placement and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Basic aptitude and technical e

Round 2 - One-on-one 

(1 Question)

  • Q1. Technical and hr interview

Interview Preparation Tips

Interview preparation tips for other job seekers - learn the basic concepts of your favourite subjects and prepare of general aptitude.
Round 1 - Aptitude Test 

Basic aptitude and technical questions.

Round 2 - One-on-one 

(1 Question)

  • Q1. Technical and hr interview

Interview Preparation Tips

Interview preparation tips for other job seekers - clear the basic concepts. Questions asked from your core subjects like from thermodynamic, IC engine, etc.

Aarti Industries interview questions for designations

 Graduate Apprentice Trainee

 (3)

 Graduate Trainee

 (3)

 Engineer Trainee

 (1)

 Apprentice Trainee

 (3)

 Trainee

 (2)

 Office Trainee

 (9)

 Associate Trainee

 (1)

 Process Engineer

 (4)

I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Most questions related to RCC and soile

Round 2 - Technical 

(1 Question)

  • Q1. What does grade in cement means
  • Ans. 

    Grade in cement refers to the strength of the cement mixture.

    • Grade in cement is a measure of the compressive strength of the cement mixture.

    • It is usually denoted by a number, such as 32.5 or 42.5, which indicates the strength in megapascals (MPa).

    • Higher grade cement is used for construction of structures that require higher strength, such as bridges and high-rise buildings.

    • The grade of cement is determined by testing t...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic core knowledge is required not too indepth except for chemical engineers and HR round is pretty chill

Interview Questionnaire 

2 Questions

  • Q1. What are your strengths weakness?
  • Q2. Past internship experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - It was good very interactive.

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. 1) introduce yourself 2)tell us more about your hobbies? 3) explain about your internship? 4) what was your final year project? 5)what is your favorite subject? 6) Tell us something about transformer prote...

Interview Preparation Tips

Interview preparation tips for other job seekers - Be thorough with your basics and prepare your core subjects well.
Have clarity about your project and internship. Be calm, honest and fluent.

I applied via Campus Placement and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Being a mechanical Engineer you should aware about the basic of fluid mechanics Heat transfer and little bit strength of materials subjects was more weightage in the technical interview.
  • Q2. How to design equipment?
  • Ans. 

    Equipment design involves identifying user needs, creating prototypes, testing, and refining the design.

    • Identify user needs and requirements

    • Create prototypes and test them thoroughly

    • Refine the design based on feedback and testing

    • Consider safety, ergonomics, and usability

    • Use appropriate materials and manufacturing processes

    • Ensure compliance with relevant regulations and standards

  • Answered by AI
  • Q3. What was centrifugal pump and difference between pump and compressor?
  • Ans. 

    A centrifugal pump is a mechanical device used to transport fluids by converting rotational kinetic energy to hydrodynamic energy.

    • Centrifugal pumps are commonly used in industries such as oil and gas, chemical, and water treatment.

    • They work by using an impeller to create a low-pressure area at the center of the pump, which draws in fluid and then expels it at high pressure through the outlet.

    • Pumps are used to transport...

  • Answered by AI
  • Q4. What was NPSH? Types of pumps..
  • Ans. 

    NPSH stands for Net Positive Suction Head. It is a measure of the pressure available at the suction side of a pump to prevent cavitation.

    • NPSH is important in pump selection and operation.

    • It is the difference between the total suction head and the vapor pressure of the pumped fluid.

    • Insufficient NPSH can lead to cavitation, which can damage the pump and reduce its efficiency.

    • Different types of pumps have different NPSH r...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare the HR questions as well as technical questions related to SOM thermo and Heat transfer fluid mechanics and machinery are important subject to interview point of view.

I applied via Campus Placement and was interviewed in Aug 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 

Very easy question but time is not more.

Round 2 - Case Study 

1st Introduction.
2nd Project
3rd Favourite Subject
4th Technical Questions
5th General knowledge
6th Hr round

Round 3 - Case Study 

I am selected in 1st round ,so 2nd time Interview for Technical + Hr

Interview Preparation Tips

Topics to prepare for Deepak Nitrite Graduate Engineer Trainee (Get) interview:
  • PTFL + PLC + DCS + CONTROL SYS
Interview preparation tips for other job seekers - Contact me - XXXXX if you have any queries.

Interview Questionnaire 

3 Questions

  • Q1. Tell me something which is not there in resume?
  • Q2. What did you learn in internship?
  • Q3. Current affairs related questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Most of the questions were based on your resume. So be very clear and concise while speaking about what mentioned in resume.
Contribute & help others!
anonymous
You can choose to be anonymous

Aarti Industries Interview FAQs

How many rounds are there in Aarti Industries Graduate Engineer Trainee (Get) interview?
Aarti Industries interview process usually has 2 rounds. The most common rounds in the Aarti Industries interview process are Aptitude Test, One-on-one Round and Technical.
What are the top questions asked in Aarti Industries Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Aarti Industries Graduate Engineer Trainee (Get) interview -

  1. What does grade in cement me...read more
  2. What is Heat of format...read more
  3. What is heat of react...read more

Recently Viewed

INTERVIEWS

Nokia Networks

5.6k top interview questions

INTERVIEWS

Aarti Industries

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Capgemini Engineering

No Interviews

INTERVIEWS

Nokia Networks

No Interviews

INTERVIEWS

Nokia Networks

No Interviews

INTERVIEWS

Aarti Industries

10 top interview questions

INTERVIEWS

Aarti Industries

No Interviews

INTERVIEWS

Tessolve Semiconductor

No Interviews

INTERVIEWS

Tessolve Semiconductor

No Interviews

Tell us how to improve this page.

Aarti Industries Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

1 Interview rounds

  • Aptitude Test Round
View more
Aarti Industries Graduate Engineer Trainee (Get) Salary
based on 42 salaries
₹4 L/yr - ₹5.5 L/yr
40% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Aarti Industries Graduate Engineer Trainee (Get) Reviews and Ratings

based on 9 reviews

3.9/5

Rating in categories

4.3

Skill development

3.8

Work-life balance

3.3

Salary

4.5

Job security

4.5

Company culture

3.3

Promotions

3.9

Work satisfaction

Explore 9 Reviews and Ratings
Assistant Manager
608 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
579 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
525 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Plant Operator
338 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
321 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aarti Industries with

Vinati Organics

4.0
Compare

Atul

3.9
Compare

Navin Fluorine International

3.9
Compare

Solvay Specialities

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent