Filter interviews by
Yes, I am aware of the work permit system.
I am familiar with the process of obtaining work permits for specific tasks or projects.
I understand the importance of following safety protocols and regulations outlined in work permits.
I have experience in coordinating with relevant authorities to ensure proper documentation and approval for work permits.
I am knowledgeable about the different types of work permits such as hot
PSSR stands for Pre-Startup Safety Review. It is required to ensure that all safety measures are in place before starting up a new process or system.
PSSR is a thorough review of safety procedures, equipment, and documentation before starting up a new process or system.
It helps identify potential hazards, ensure proper safety measures are in place, and prevent accidents or incidents.
PSSR involves reviewing safety data s...
I applied via Recruitment Consulltant and was interviewed in May 2024. There were 2 interview rounds.
Safety should be prioritized by following proper protocols, training staff, conducting regular inspections, and promoting a culture of safety.
Implement safety protocols and procedures to prevent accidents and injuries
Provide thorough training to staff on safety measures and emergency procedures
Conduct regular safety inspections and audits to identify and address potential hazards
Promote a culture of safety by encouragi...
I applied via Campus Placement and was interviewed in Feb 2024. There were 3 interview rounds.
It's a written examination in which the contain was that basic chemistry fundamentals. That's it.
Spectroscopy is the study of the interaction between matter and electromagnetic radiation.
It involves analyzing the absorption, emission, or scattering of light by atoms or molecules.
Different types of spectroscopy include UV-Vis, IR, NMR, and mass spectrometry.
Spectroscopy is used in various fields such as chemistry, physics, astronomy, and environmental science.
Chromatography is a technique used to separate and analyze mixtures of chemicals based on their properties.
Chromatography involves a stationary phase and a mobile phase
Different compounds in the mixture interact differently with the stationary phase, leading to separation
Examples include gas chromatography, liquid chromatography, and paper chromatography
HPCL is a leading oil and gas company in India, while GC stands for Gas Chromatography used in chemical analysis.
HPCL (Hindustan Petroleum Corporation Limited) is a Navratna oil and gas company in India.
It is a Fortune Global 500 company and has a strong presence in refining, marketing, and distribution of petroleum products.
GC (Gas Chromatography) is a technique used for separating and analyzing compounds in a mixture...
Molarity is the concentration of a solution expressed as the number of moles of solute per liter of solution. Molality is the concentration of a solution expressed as the number of moles of solute per kilogram of solvent.
Molarity is measured in moles per liter (M)
Molality is measured in moles per kilogram (m)
Molarity changes with temperature due to volume changes, while molality remains constant
Molarity is commonly use...
Grignard reaction involves the addition of an organomagnesium halide to a carbonyl compound to form a new carbon-carbon bond.
Formation of Grignard reagent by reacting magnesium with an alkyl or aryl halide
Addition of the Grignard reagent to a carbonyl compound to form a tertiary alcohol
Mechanism involves nucleophilic addition of the Grignard reagent to the carbonyl carbon
Commonly used in organic synthesis to create com...
Polar solvents are substances that have a positive and negative charge distribution, making them capable of dissolving polar compounds.
Polar solvents have a partial positive and partial negative charge, allowing them to interact with polar molecules.
Examples of polar solvents include water, acetone, ethanol, and methanol.
These solvents are commonly used in various chemical reactions and processes due to their ability t...
Protic polar solvents are solvents that contain hydrogen atoms connected directly to an electronegative atom, such as oxygen or nitrogen.
Protic polar solvents have a partial positive charge on the hydrogen atom and a partial negative charge on the electronegative atom.
These solvents are capable of forming hydrogen bonds with solutes, making them useful in various chemical reactions.
Examples of protic polar solvents inc...
I am a recent graduate with a strong academic background in business administration and a passion for learning and growth.
Recent graduate with a degree in business administration
Passionate about learning and growth
Strong academic background
Eager to start a career in the business field
My strength is my strong work ethic and attention to detail. My weakness is that I can be overly critical of my own work.
Strength: Strong work ethic - always willing to put in extra effort to get the job done
Strength: Attention to detail - I ensure that all tasks are completed accurately and thoroughly
Weakness: Overly critical of my own work - I sometimes struggle to recognize my own accomplishments
I have not worked in your organization before.
I have not had the opportunity to work in your organization yet.
I am excited about the possibility of starting my career with your organization.
I am eager to learn and grow within your company.
There are 7 buttons on my shirt.
There are typically 7 buttons on a men's dress shirt.
The number of buttons may vary depending on the style and design of the shirt.
Buttons are used for fastening the shirt and can be made of various materials like plastic, metal, or mother of pearl.
I applied via Walk-in and was interviewed in Sep 2024. There were 2 interview rounds.
Personal questions an work knowledge
Aarti Industries interview questions for popular designations
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
Get interview-ready with Top Aarti Industries Interview Questions
Predictive maintenance is a proactive maintenance strategy that uses data analysis to predict when equipment failure is likely to occur.
Uses data analysis to predict when equipment failure is likely to occur
Helps in scheduling maintenance activities before a breakdown occurs
Reduces downtime and increases equipment reliability
Examples: monitoring equipment performance metrics, using sensors to detect anomalies
Spark test in GLR is carried out by applying a small amount of spark to the sample to observe the color and intensity of the spark produced.
Ensure the sample is clean and free of any contaminants
Apply a small amount of spark to the sample using a spark tester
Observe the color and intensity of the spark produced
Compare the results with a reference chart to determine the quality of the sample
P&I'd stands for Planning and Implementation Document.
P&I'd is a document that outlines the planning and implementation process for a project or task.
It includes details such as project objectives, timelines, resources required, and steps to be followed.
P&I'd helps in ensuring a systematic and organized approach to project management.
Example: A P&I'd for a software development project would include the project scope, d...
My process diagram outlines the steps involved in managing a team and ensuring efficient operations.
The diagram starts with the identification of team goals and objectives.
It then moves on to the allocation of tasks and responsibilities to team members.
Regular communication and feedback loops are established to monitor progress and address any issues.
Performance evaluations and coaching sessions are conducted to suppor...
Hydrogenation is a chemical process that involves the addition of hydrogen to a compound, typically an unsaturated hydrocarbon.
Hydrogenation is commonly used in the food industry to convert liquid vegetable oils into solid fats, such as margarine.
It is also used in the production of various chemicals, such as hydrogenated oils for use in soaps and detergents.
The process of hydrogenation can change the physical properti...
DCS stands for Distributed Control System. It is a computerized control system used to monitor and control industrial processes.
DCS is composed of multiple control units distributed throughout a plant or facility.
It uses a network to communicate and exchange data between the control units.
DCS provides centralized control and monitoring of various processes, such as temperature, pressure, flow, and level.
It allows for r...
Unit operation refers to a single step in a chemical process, while unit process involves a series of unit operations.
Unit operation is a distinct step in a chemical process.
Unit process is a combination of multiple unit operations.
Unit operation focuses on a specific physical or chemical change.
Unit process involves the transformation of raw materials into desired products.
Examples of unit operations include distillat...
Distillation is a process of separating components of a liquid mixture based on their different boiling points.
Distillation involves heating a liquid mixture to vaporize the more volatile components.
The vapor is then cooled and condensed back into a liquid, resulting in the separation of the components.
The component with the lower boiling point will vaporize first and be collected separately.
Distillation is commonly us...
Reflux ratio is the ratio of the liquid refluxed back to the distillation column to the liquid product withdrawn from the column.
Reflux ratio is an important parameter in distillation processes.
It helps in controlling the separation efficiency of the column.
A higher reflux ratio leads to better separation but requires more energy.
Reflux ratio can be adjusted to optimize the column performance.
For example, in a distilla...
Centrifugal pumps work by converting rotational energy into kinetic energy to move fluid.
Centrifugal pumps use an impeller to create centrifugal force, which pushes the fluid towards the pump outlet.
The impeller spins at high speed, creating a low-pressure area at the center and a high-pressure area at the outer edges.
Fluid enters the pump through the suction inlet and is accelerated by the impeller, increasing its kin...
PSV stands for Pressure Safety Valve.
PSV is a type of valve used to protect equipment from overpressure.
It automatically opens when the pressure exceeds a set limit, releasing excess pressure.
PSVs are commonly used in industries such as oil and gas, chemical, and power plants.
They help prevent equipment damage, explosions, and other safety hazards.
PSVs are designed to meet specific pressure and flow requirements.
They a...
LooP reactor is a type of reactor used in chemical processes for continuous flow reactions.
LooP reactor allows for continuous processing of reactions, leading to higher efficiency and productivity.
It is commonly used in the pharmaceutical and fine chemical industries.
The design of LooP reactor enables precise control over reaction parameters such as temperature, pressure, and residence time.
There are several types of level transmitters used in various industries.
Capacitance level transmitters
Ultrasonic level transmitters
Radar level transmitters
Differential pressure level transmitters
Guided wave radar level transmitters
Conductivity level transmitters
Float level transmitters
RTD stands for Resistance Temperature Detector. It is a type of temperature sensor that measures temperature by correlating the resistance of the sensor with temperature.
RTD is commonly used in industrial applications for accurate temperature measurement.
It is based on the principle that the electrical resistance of a metal changes with temperature.
RTDs are known for their high accuracy, stability, and repeatability.
Th...
I expect a competitive salary that reflects my experience and the responsibilities of the Senior Supervisor role.
I am looking for a salary that is commensurate with my skills and experience.
I would like to be compensated fairly for the added responsibilities of the Senior Supervisor position.
I am open to discussing salary based on the overall compensation package and benefits offered.
I have researched the market rates ...
I applied via Approached by Company and was interviewed in Mar 2024. There were 2 interview rounds.
Kinematics & engineering mechanics & fluid dynamics.
Top trending discussions
The duration of Aarti Industries interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 253 interviews
Interview experience
based on 2.8k reviews
Rating in categories
Assistant Manager
608
salaries
| ₹4.5 L/yr - ₹12.6 L/yr |
Deputy Manager
578
salaries
| ₹6.7 L/yr - ₹17.5 L/yr |
Executive
527
salaries
| ₹2.2 L/yr - ₹7.7 L/yr |
Plant Operator
339
salaries
| ₹1.6 L/yr - ₹5.2 L/yr |
Senior Executive
322
salaries
| ₹3.3 L/yr - ₹10.3 L/yr |
Vinati Organics
Atul
Navin Fluorine International
Solvay Specialities