Upload Button Icon Add office photos

Filter interviews by

Tracks Components Assistant Engineer Interview Questions and Answers

Updated 27 Dec 2021

Tracks Components Assistant Engineer Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed in Nov 2021. There were 3 interview rounds.

Interview Questionnaire 

12 Questions

  • Q1. MIG Welding Defects?
  • Q2. Robot programming required?
  • Q3. PLC parameters?
  • Q4. Welding parameters??
  • Q5. Current range??
  • Ans. 

    The current range refers to the range of electrical current that a device or system can handle safely and effectively.

    • The current range is typically specified in amperes (A) or milliamperes (mA).

    • It is important to ensure that the current range of a device or system is not exceeded, as this can lead to damage or failure.

    • For example, a power supply may have a current range of 0-5A, meaning it can safely provide up to 5A ...

  • Answered by AI
  • Q6. Voltage range???
  • Q7. Gas pressure range??
  • Ans. 

    Gas pressure range varies depending on the application and type of gas being used.

    • Gas pressure range can be measured in units such as psi, kPa, or bar.

    • For example, the pressure range for natural gas pipelines is typically between 200-1,200 psi.

    • In contrast, the pressure range for medical oxygen cylinders is around 2,000 psi.

    • It is important to ensure that gas pressure is within the safe operating range to prevent acciden

  • Answered by AI
  • Q8. Air pressure Range??
  • Q9. Introduction your self??
  • Q10. Productivity calculate??
  • Q11. OEE calculate???
  • Q12. 16 losses ???
  • Ans. 

    16 losses is not a clear question. Please provide more context.

    • Please provide more information or context for the question.

    • Are you referring to 16 losses in a specific system or process?

    • Are these losses related to efficiency or productivity?

    • Without more information, it is difficult to provide a specific answer.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - BE mechanical engineering fabrication shop mig welding

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. GD & T, Drawing

I applied via Job Portal and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 

Aptitutes questions o

Round 2 - Technical 

(1 Question)

  • Q1. C, c++ ,movementum others questions
Round 3 - HR 

(1 Question)

  • Q1. Tell abouts yourself and abouts company

Interview Preparation Tips

Interview preparation tips for other job seekers - Jobs are good and and members are good in behaviour

I applied via Job Fair and was interviewed in May 2018. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. This round is very important for share your experience for technical HR.
  • Q2. This round is satisfied for HR in all level for company requirements.
  • Q3. HR Interview to correlate in our behaviour and about for introduce yourself and family detail.

Interview Preparation Tips

General Tips: All Interviews for not stressful but I make these Interviews for scared and stressful.
These Interviews to clarify for your behaviour and position.
Skills: Logical Thinking, Hard work, Analytical problem solving,, Problem Solving, Analytical Skills, Time Management, Decision Making Skills
Duration: 1-4 weeks
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What are the main Components of Computer system?
  • Q2. Explain the functions of Motherboard
Round 2 - HR 

(2 Questions)

  • Q1. Tell about yourself
  • Q2. What are your strength and weakness?
Round 3 - Practical work Knowledge 

(2 Questions)

  • Q1. How will you troubleshoot the slow network connection?
  • Q2. What steps to take if the printer is not working on the network?

Interview Preparation Tips

Interview preparation tips for other job seekers - Identify and pursue the most suitable opportunities.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Sep 2024. There were 3 interview rounds.

Round 1 - Technical 

(4 Questions)

  • Q1. Test of cement and theire types?
  • Ans. 

    Cement is tested for its quality and strength. Types include Portland cement, rapid hardening cement, and white cement.

    • Cement is tested for compressive strength, fineness, setting time, soundness, and consistency.

    • Types of cement include Portland cement, rapid hardening cement, white cement, etc.

    • Example: Portland cement is commonly used in construction for its versatility and durability.

  • Answered by AI
  • Q2. RCC Design, ISI code of cement
  • Q3. Slump cone test and their size
  • Ans. 

    Slump cone test is used to measure the workability of concrete. The size of the slump cone is standardized.

    • Slump cone test is a common test used in construction to determine the consistency of concrete mix.

    • The size of the slump cone is typically 12 inches in height, 8 inches in diameter at the base, and 4 inches in diameter at the top.

    • During the test, the slump cone is filled with concrete, compacted, and then lifted o...

  • Answered by AI
  • Q4. Consistency Test
Round 2 - Group Discussion 

Whose cement is best, Complaint Handling experience?

Round 3 - HR 

(2 Questions)

  • Q1. Why change your job?
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Looking for a new challenge to expand my skills and knowledge.

    • Seeking opportunities for career advancement and growth.

    • Wanting to work in a more dynamic and fast-paced environment.

    • Interested in exploring different industries or sectors.

    • Desire for a better work-life balance or location change.

  • Answered by AI
  • Q2. Salary negotiation?

Interview Preparation Tips

Topics to prepare for JK Cement Assistant Manager interview:
  • Building materials
Interview preparation tips for other job seekers - Good experience.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. Self introduction
  • Q2. Hr round and salary expectation
  • Q3. Your achievements
  • Q4. Metrics and issue
  • Q5. Team cordination
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Paint knowledge
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Tell me about your self
Round 3 - One-on-one 

(1 Question)

  • Q1. Work experience
Round 4 - HR 

(1 Question)

  • Q1. Salary discussion
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. What is P2P process?
  • Ans. 

    P2P process refers to the Procure-to-Pay process, which involves the entire cycle of purchasing goods or services and making payments for them.

    • P2P process starts with identifying the need for a product or service and creating a purchase requisition.

    • The requisition is then approved and converted into a purchase order.

    • The purchase order is sent to the supplier, who delivers the goods or services.

    • Upon receipt, the goods a...

  • Answered by AI

Tracks Components Interview FAQs

What are the top questions asked in Tracks Components Assistant Engineer interview?

Some of the top questions asked at the Tracks Components Assistant Engineer interview -

  1. Gas pressure rang...read more
  2. Current rang...read more
  3. 16 losses ...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Tracks Components interview
Campus Placement
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 696 Interviews
Swiggy Interview Questions
3.8
 • 423 Interviews
Quess Interview Questions
3.9
 • 384 Interviews
TCS iON Interview Questions
3.9
 • 360 Interviews
Planet Spark Interview Questions
3.7
 • 356 Interviews
Udaan Interview Questions
4.0
 • 334 Interviews
Bosch Interview Questions
4.2
 • 328 Interviews
Meesho Interview Questions
3.7
 • 326 Interviews
Zomato Interview Questions
3.8
 • 314 Interviews
TVS Motor Interview Questions
4.0
 • 304 Interviews
View all
Tracks Components Assistant Engineer Salary
based on 55 salaries
₹2 L/yr - ₹4 L/yr
25% less than the average Assistant Engineer Salary in India
View more details

Tracks Components Assistant Engineer Reviews and Ratings

based on 4 reviews

4.5/5

Rating in categories

4.5

Skill development

3.8

Work-Life balance

3.4

Salary & Benefits

4.3

Job Security

4.5

Company culture

3.2

Promotions/Appraisal

4.1

Work Satisfaction

Explore 4 Reviews and Ratings
Production Engineer
69 salaries
unlock blur

₹2.2 L/yr - ₹5 L/yr

Assistant Engineer
55 salaries
unlock blur

₹2 L/yr - ₹4 L/yr

Quality Engineer
52 salaries
unlock blur

₹1.5 L/yr - ₹4.2 L/yr

Engineer
39 salaries
unlock blur

₹2.4 L/yr - ₹4.5 L/yr

Junior Engineer
23 salaries
unlock blur

₹2 L/yr - ₹3.6 L/yr

Explore more salaries
Compare Tracks Components with

Bharat Forge

3.8
Compare

Samvardhana Motherson Group

3.8
Compare

Sundaram Clayton

4.1
Compare

Ramkrishna Forgings

3.6
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview