Filter interviews by
I applied via Campus Placement and was interviewed in Nov 2021. There were 3 interview rounds.
The current range refers to the range of electrical current that a device or system can handle safely and effectively.
The current range is typically specified in amperes (A) or milliamperes (mA).
It is important to ensure that the current range of a device or system is not exceeded, as this can lead to damage or failure.
For example, a power supply may have a current range of 0-5A, meaning it can safely provide up to 5A ...
Gas pressure range varies depending on the application and type of gas being used.
Gas pressure range can be measured in units such as psi, kPa, or bar.
For example, the pressure range for natural gas pipelines is typically between 200-1,200 psi.
In contrast, the pressure range for medical oxygen cylinders is around 2,000 psi.
It is important to ensure that gas pressure is within the safe operating range to prevent acciden
16 losses is not a clear question. Please provide more context.
Please provide more information or context for the question.
Are you referring to 16 losses in a specific system or process?
Are these losses related to efficiency or productivity?
Without more information, it is difficult to provide a specific answer.
I applied via Walk-in
posted on 5 May 2024
I applied via Walk-in and was interviewed before May 2023. There was 1 interview round.
I applied via Company Website and was interviewed before Dec 2021. There were 2 interview rounds.
Maintain production quantity and quality output by optimizing processes, training employees, and monitoring performance.
Regularly review and optimize production processes to eliminate inefficiencies and reduce waste.
Provide ongoing training and development opportunities for employees to improve their skills and knowledge.
Implement quality control measures to ensure that products meet or exceed customer expectations.
Mon...
Mathamatics resoning
posted on 19 Oct 2021
I applied via Naukri.com and was interviewed before Oct 2020. There was 1 interview round.
posted on 22 Jan 2025
I was interviewed before Jan 2024.
Mathematics for basic classes 8 to 10.
I have 5 years of experience in physical metallurgy, including conducting research on alloy development and analyzing microstructures.
Conducted research on alloy development to improve material properties
Analyzed microstructures using microscopy techniques
Worked on heat treatment processes to optimize material performance
I am motivated to seek employment with your company because of your reputation for innovation and commitment to employee development.
I am impressed by the company's track record of success and growth.
I am excited about the opportunity to work with cutting-edge technology and contribute to impactful projects.
I value a company that invests in its employees' professional growth and development.
I am drawn to the company's
posted on 24 Aug 2023
I applied via Naukri.com and was interviewed in Feb 2023. There were 3 interview rounds.
The current company follows a systematic process for production to ensure efficiency and quality.
The production process starts with planning and scheduling of orders.
Raw materials are sourced and inspected for quality before being used in production.
Machinery and equipment are maintained regularly to ensure smooth operations.
Quality control checks are conducted at various stages of production to maintain high standards...
Problem during production requires quick identification, analysis, and resolution to minimize downtime and ensure quality output.
Quickly identify the root cause of the problem
Analyze the impact on production schedule and quality
Implement immediate corrective actions to resolve the issue
Communicate with relevant stakeholders to keep them informed
Document the problem and solution for future reference
I was interviewed in Dec 2016.
A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.
Two-stroke engines have a simpler design and are lighter than four-stroke engines.
Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.
Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...
A pictorial representation of a SI engine with valve opening, TDC, and BDC.
SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.
Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.
TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.
BDC (Bottom Dead Ce...
I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.
Implementing electronic fuel injection system for better fuel management
Introducing hybrid technology for improved mileage
Optimizing aerodynamics of the motorcycle for reduced drag
Using lightweight materials for better fuel economy
I am a dedicated production engineer with a strong background in manufacturing processes and quality control.
Graduated with a degree in Mechanical Engineering
Experience working in a manufacturing plant for 3 years
Proficient in CAD software for designing production layouts
Implemented lean manufacturing principles to improve efficiency
Led a team in reducing production downtime by 20%
I applied via Referral and was interviewed in Sep 2020. There were 3 interview rounds.
based on 4 reviews
Rating in categories
Production Engineer
69
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
56
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
52
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
42
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Samvardhana Motherson Group
Sundaram Clayton
Ramkrishna Forgings