Upload Button Icon Add office photos

Filter interviews by

TCE Design Trainee Interview Questions and Answers

Updated 17 Feb 2024

TCE Design Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What you had learnt and gained in your diploma education
  • Q2. What is thermodynamics process,
  • Ans. 

    Thermodynamics process involves the study of energy transfer and conversion in physical systems.

    • It deals with heat, work, and energy interactions in systems.

    • Examples include heat engines, refrigerators, and air conditioners.

    • First law of thermodynamics states that energy cannot be created or destroyed, only transferred or converted.

    • Second law of thermodynamics states that entropy in a closed system will always increase

  • Answered by AI
  • Q3. Zeroth law , first law of thermodynamics and its equation

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep studying and keep shining

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Aptitude test was not prompt

Round 2 - Technical 

(2 Questions)

  • Q1. They mentioned personal interview for technical round
  • Q2. They took technical interview and then gave detailing work.
Round 3 - HR 

(1 Question)

  • Q1. Hr is very poor

Interview Preparation Tips

Interview preparation tips for other job seekers - They hire engineers for detailing work. Please note they do not have engineering work. Not recommended for freshers or ani degree holder. They take Workplace harassment casually. Poor HR department who is biased. They do not take safety as a priority. Very very very poor company. Don’t waste your valuable time and talent in this company.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Stress, strain, thermodynamics
  • Q2. Degree of freedom, Pressure
  • Ans. 

    Degree of freedom refers to the number of independent variables that can be changed in a system, while pressure is the force exerted on a surface per unit area.

    • Degree of freedom in product design refers to the number of ways a component can move or be adjusted independently.

    • Pressure in product design is important for determining the strength and stability of materials and structures.

    • Understanding the degree of freedom ...

  • Answered by AI
  • Q3. Ohm's law, laws of thermodynamics
  • Q4. Basics of SOM, GD&T
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About JOB ROLE explanination
  • Q2. About the design process
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What are your expectations
  • Ans. 

    I expect challenging projects, opportunities for growth, supportive team environment, and work-life balance.

    • Challenging projects that allow me to utilize my skills and knowledge

    • Opportunities for professional growth and development

    • Supportive team environment where collaboration and communication are valued

    • Work-life balance to ensure productivity and well-being

  • Answered by AI
  • Q2. Your past experience
  • Ans. 

    I have 5 years of experience working as a Design Engineer in the automotive industry.

    • Designed components for new vehicle models

    • Collaborated with cross-functional teams to ensure design met requirements

    • Utilized CAD software to create detailed drawings

    • Performed testing and analysis on prototypes

    • Implemented design changes based on feedback and testing results

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. What you do in your last company

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident in your interview time.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Telephonic interview
  • Q2. Regarding the design

Interview Preparation Tips

Interview preparation tips for other job seekers - It's good interview

I applied via Approached by Company and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. How many methods are used to forecast population
  • Ans. 

    There are multiple methods used to forecast population.

    • Demographic analysis

    • Cohort-component method

    • Time series analysis

    • Mathematical models

    • Survival analysis

    • Migration analysis

  • Answered by AI
  • Q2. How to calculate ESR capacity
  • Ans. 

    ESR capacity can be calculated by measuring the equivalent series resistance (ESR) of a component or circuit.

    • ESR capacity is determined by measuring the ESR of the component or circuit.

    • ESR is the resistance that exists in series with the ideal capacitance of a component.

    • To calculate ESR capacity, use an ESR meter or measure the voltage drop across a known current.

    • ESR capacity is important in determining the performance...

  • Answered by AI
  • Q3. What is the peak factor are used for Distribution design
  • Ans. 

    Peak factors are used in distribution design to account for peak loads and ensure safe and efficient operation.

    • Peak factors are used to determine the maximum load that a distribution system can handle.

    • They take into consideration factors such as diversity of loads, power factor, and future growth.

    • For example, a peak factor of 1.5 means that the system should be designed to handle 50% more than the average load.

    • Peak fac...

  • Answered by AI
  • Q4. What is the minimum residual pressure in SVS
  • Ans. 

    The minimum residual pressure in SVS refers to the lowest pressure that remains in the system after it has been depressurized.

    • The minimum residual pressure is important to ensure the system is properly depressurized and safe for maintenance or repair.

    • It is typically measured in units of pressure, such as psi or bar.

    • The specific value of the minimum residual pressure can vary depending on the design and requirements of ...

  • Answered by AI
  • Q5. What is the Component in the water supply scheme
  • Ans. 

    Components in a water supply scheme include pipes, pumps, valves, storage tanks, and treatment facilities.

    • Pipes: Used to transport water from the source to the distribution network.

    • Pumps: Provide the necessary pressure to move water through the system.

    • Valves: Control the flow and direction of water within the scheme.

    • Storage tanks: Store water for peak demand periods or emergencies.

    • Treatment facilities: Purify and disin

  • Answered by AI
  • Q6. For Distribution system and Headwork what is the design period
  • Ans. 

    The design period for distribution system and headwork refers to the expected lifespan or duration for which the system is designed to function effectively.

    • The design period is determined based on factors such as expected growth, technological advancements, and maintenance requirements.

    • It is important to consider the long-term needs and goals of the distribution system and headwork when determining the design period.

    • Fo...

  • Answered by AI
  • Q7. For Design Pumping machinery and ESR what is the design period.
  • Ans. 

    The design period for pumping machinery and ESR refers to the intended lifespan or duration of operation for the equipment.

    • The design period is typically determined based on factors such as expected usage, maintenance requirements, and technological advancements.

    • It is important to consider the design period when selecting materials, components, and manufacturing processes to ensure durability and reliability.

    • For exampl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read the Manual of water supply and Treatment ministry of Urban Development and JJM Guidelines
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jun 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Campus selection - reasoning tests

Round 2 - One-on-one 

(2 Questions)

  • Q1. Question answers like iron carbon diagram..
  • Q2. Questions from material handling.

Interview Preparation Tips

Interview preparation tips for other job seekers - Negotiate salary before joining the company. Don't expect after joining.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
More than 8 weeks
Result
-

I applied via Naukri.com

Round 1 - HR 

(1 Question)

  • Q1. Introducing and personality
Round 2 - Group Discussion 

Technical questions about the Revit and MEP

TCE Interview FAQs

How many rounds are there in TCE Design Trainee interview?
TCE interview process usually has 1 rounds. The most common rounds in the TCE interview process are Technical.
What are the top questions asked in TCE Design Trainee interview?

Some of the top questions asked at the TCE Design Trainee interview -

  1. What is thermodynamics proce...read more
  2. Zeroth law , first law of thermodynamics and its equat...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 TCE interview
Job Portal
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.2k Interviews
Infosys Interview Questions
3.7
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.5k Interviews
Tech Mahindra Interview Questions
3.6
 • 3.7k Interviews
HCLTech Interview Questions
3.5
 • 3.7k Interviews
LTIMindtree Interview Questions
3.9
 • 2.8k Interviews
Mphasis Interview Questions
3.4
 • 783 Interviews
Tata Projects Interview Questions
4.3
 • 397 Interviews
View all
TCE Design Trainee Salary
based on 11 salaries
₹2 L/yr - ₹3 L/yr
17% less than the average Design Trainee Salary in India
View more details

TCE Design Trainee Reviews and Ratings

based on 3 reviews

3.3/5

Rating in categories

4.2

Skill development

3.2

Work-Life balance

2.2

Salary & Benefits

4.0

Job Security

3.3

Company culture

2.9

Promotions/Appraisal

3.3

Work Satisfaction

Explore 3 Reviews and Ratings
Assistant Manager
520 salaries
unlock blur

₹4.5 L/yr - ₹13 L/yr

Manager
330 salaries
unlock blur

₹6.2 L/yr - ₹16.1 L/yr

Senior Engineer
320 salaries
unlock blur

₹3.5 L/yr - ₹10 L/yr

Senior Manager
318 salaries
unlock blur

₹10 L/yr - ₹22.2 L/yr

Consultant
194 salaries
unlock blur

₹3.9 L/yr - ₹13 L/yr

Explore more salaries
Compare TCE with

Infosys

3.7
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare

Tech Mahindra

3.6
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview