National Institute of Technology (NIT), Warangal
Warangal, Telangana
Your seniors at National Institute of Technology (NIT), Warangal were your true well-wishers, they shared their placement interview questions for you. 🙏
AmbitionBox
Search
Reviews
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Filter interviews byNational Institute of Technology (NIT), Warangal Placement Interview Questions
Updated
9 Jan 2025
19 interviews found
I applied via Campus Placement and was interviewed before Nov 2021.
3 Interview Rounds
1
Aptitude Test Round
Aptitude test was easy. Basic quant reasoning and english was there..
2
Technical Round (2 Questions)
- Q1. Technical paper was critical. Mainly from M.tech level, questions were there.. as I was sitting for PGET post.
- Q2. Basic solid mechanics questions were being asked.
3
HR Round (1 Question)
- Q1. HR asked situational solutions for different situations.
Interview Preparation Tips
Interview preparation tips for other job seekers - Stick to the basics.. That is what is expected from the fresher's..
4 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: They conducted technical aptitude first.It is fully based on thermodynamics.About 50% they asked basics,rest are its simple application level questions.
For quantitative,reasoning,english they asked 10 questions each.This section feels time tight.For quantitative it was from circular motion,ratio and proportion etc....
Tips: Be strong in your basics.
Duration: 60 minutes
Round: Technical Interview
Experience: I was interviwed by their GM.The experience with GM was excellent.He treated all students very friendly.
He started from the basics first,project work in btech and mtech.They asked all things in my resume...Finally he started asking about application level questions(heat transfer,power plant etc)...It takes nearly 1 hr.But I havent felt that much time
Tips: 1.Be strong in your basics.
2.Carefully note the job profile at the time of ppt and be prepared before coming to the tech interview,they will ask mainly questions from that section
Round: HR Interview
Experience: After Technical they called me for HR.In HR it takes nearly 1 hour,very easy.He gave me situations in the company while we are working and asked me how you face these siuations.It was simple and if you think you will reach good answers.he asked career objective,hobbies,strengths,family details,ur good things etc....
Tips: 1.Be honest...if you are not able to get it dont tell guess answers...dont worry nobody is answering all questions in this 1 hr interview....
2.Behave very gently be calm and just enjoy the day....
Skills: C, C++, OS, SQL,
College Name: NIT WARANGAL
Experience: They conducted technical aptitude first.It is fully based on thermodynamics.About 50% they asked basics,rest are its simple application level questions.
For quantitative,reasoning,english they asked 10 questions each.This section feels time tight.For quantitative it was from circular motion,ratio and proportion etc....
Tips: Be strong in your basics.
Duration: 60 minutes
Round: Technical Interview
Experience: I was interviwed by their GM.The experience with GM was excellent.He treated all students very friendly.
He started from the basics first,project work in btech and mtech.They asked all things in my resume...Finally he started asking about application level questions(heat transfer,power plant etc)...It takes nearly 1 hr.But I havent felt that much time
Tips: 1.Be strong in your basics.
2.Carefully note the job profile at the time of ppt and be prepared before coming to the tech interview,they will ask mainly questions from that section
Round: HR Interview
Experience: After Technical they called me for HR.In HR it takes nearly 1 hour,very easy.He gave me situations in the company while we are working and asked me how you face these siuations.It was simple and if you think you will reach good answers.he asked career objective,hobbies,strengths,family details,ur good things etc....
Tips: 1.Be honest...if you are not able to get it dont tell guess answers...dont worry nobody is answering all questions in this 1 hr interview....
2.Behave very gently be calm and just enjoy the day....
Skills: C, C++, OS, SQL,
College Name: NIT WARANGAL
4 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: We had 2 rounds of written test. 30 minutes of aptitude test and 30 minutes of technical test. All questions are of
multiple choice type only.
In aptitude test, 10 marks were for english verbal ability (paragraphs, synonyms, antonyms).
10 marks for quantitative aptitude. (be thorough with RS agarwal)
10 marks for data interpretation.
In technical test,
almost they covered basic questions from IS:456-2000,IS:800, (for eg: minimum reinforcement in RCC, rankine
merchant formula form IS: 800), IS:1893,pre-stressed concrete.
Tips: The questions that are asked are used by you regularly. No question will be beyond your knowledge. Only thing is that you have to give a glance of those subjects or codes atleast once before you sit for test.Then you will be certainly qualified.
Duration: 90 minutes
Round: Technical Interview
Experience: Panel consists of one or two people. They asked me about my B. Tech project, my area of interest in B. Tech and
M. Tech. Questions on Earth quake engineering, Torsion, Foundations, Steel structures, Structural analysis, the
code books I have used and some simple clauses of those codes.My technical interview went on for 35 minutes. First 20 minutes I answered very well. Later the panel asked too difficult questions and I could not answer them properly. But through out the interview I have shown huge amount of confidence, enthusiasm, good english and a smiling face.
Tips: As I already mentioned, please be strong with your basics of B. Tech and M. Tech. Come prepared with your B.Tech project. Many questions will be asked regarding that. If possible go with your project report also.
Round: HR Interview
Experience: They asked me some questions regarding previous day's pre-placement talk. They tried to know whether I was
attentive when ppt was going on or not. Then they asked me why TATA group, what do you know about TCE, Why
M. Tech, why this specialization, tell something about yourself, family, education. They asked me to list some of the
essential leader ship qualities, about hobbies. They also asked me to sing a song. (Because I have mentioned
singing as a hobby in my resume)
Tips: At last they will give you a chance to ask any questions / doubts. In a hurry or in tension please don’t come out
saying that you don’t have any thing to ask. Please ask something relevant to the company. Come prepared with a
question while preparing for the company by seeing the company's website.
General Tips: SUGGESTIONS TO JUNIORS
Just by seeing what I wrote above please don’t think that the interviews are tough and they are only for people who study regularly, or for those who have very good CGPA. Its nothing like that. After finishing your second semester in the month of april, you will have to go for summer internship till july and placements will start from august 1st (approximately). Utilize those 2 months of summer internship.
Skill Tips: please be strong with your basics of B. Tech and M. Tech.Daily study/revise your basics for 2 hours atleast,
from your B. Tech level starting from strength of materials to final year project work.
Skills: Earth quake Engineering, Foundations, Torsion
College Name: NIT WARANGAL
Experience: We had 2 rounds of written test. 30 minutes of aptitude test and 30 minutes of technical test. All questions are of
multiple choice type only.
In aptitude test, 10 marks were for english verbal ability (paragraphs, synonyms, antonyms).
10 marks for quantitative aptitude. (be thorough with RS agarwal)
10 marks for data interpretation.
In technical test,
almost they covered basic questions from IS:456-2000,IS:800, (for eg: minimum reinforcement in RCC, rankine
merchant formula form IS: 800), IS:1893,pre-stressed concrete.
Tips: The questions that are asked are used by you regularly. No question will be beyond your knowledge. Only thing is that you have to give a glance of those subjects or codes atleast once before you sit for test.Then you will be certainly qualified.
Duration: 90 minutes
Round: Technical Interview
Experience: Panel consists of one or two people. They asked me about my B. Tech project, my area of interest in B. Tech and
M. Tech. Questions on Earth quake engineering, Torsion, Foundations, Steel structures, Structural analysis, the
code books I have used and some simple clauses of those codes.My technical interview went on for 35 minutes. First 20 minutes I answered very well. Later the panel asked too difficult questions and I could not answer them properly. But through out the interview I have shown huge amount of confidence, enthusiasm, good english and a smiling face.
Tips: As I already mentioned, please be strong with your basics of B. Tech and M. Tech. Come prepared with your B.Tech project. Many questions will be asked regarding that. If possible go with your project report also.
Round: HR Interview
Experience: They asked me some questions regarding previous day's pre-placement talk. They tried to know whether I was
attentive when ppt was going on or not. Then they asked me why TATA group, what do you know about TCE, Why
M. Tech, why this specialization, tell something about yourself, family, education. They asked me to list some of the
essential leader ship qualities, about hobbies. They also asked me to sing a song. (Because I have mentioned
singing as a hobby in my resume)
Tips: At last they will give you a chance to ask any questions / doubts. In a hurry or in tension please don’t come out
saying that you don’t have any thing to ask. Please ask something relevant to the company. Come prepared with a
question while preparing for the company by seeing the company's website.
General Tips: SUGGESTIONS TO JUNIORS
Just by seeing what I wrote above please don’t think that the interviews are tough and they are only for people who study regularly, or for those who have very good CGPA. Its nothing like that. After finishing your second semester in the month of april, you will have to go for summer internship till july and placements will start from august 1st (approximately). Utilize those 2 months of summer internship.
Skill Tips: please be strong with your basics of B. Tech and M. Tech.Daily study/revise your basics for 2 hours atleast,
from your B. Tech level starting from strength of materials to final year project work.
Skills: Earth quake Engineering, Foundations, Torsion
College Name: NIT WARANGAL
4 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: The technical test was conducted first. Questions were mainly from Power systems and a few from basic circuit theory. In fact the questions from power systems were taken from Wadhwa.As for the general aptitude test, time was the major constraint, the questions being relatively straight forward.Separate cutoffs were there for each test and calculators were allowed.
Tips: Be absolutely clear with the fundamentals of the subjects.
Duration: 75 minutes
Round: Technical Interview
Experience: The technical interview started off with details regarding my summer project at BARC, Mumbai. The project involved modeling and simulation of the nuclear reactor. I was asked the basic principles involved in energy conversion in a nuclear reactor. Further specifications of various subsystems like generator capacity, voltage, transformer ratings etc. were asked. The package(Labview) and the language(C) used for the project were also inquired. Questions regarding electric machines followed like 1. What would happen if dc is used in transformers? 2. Draw the output for the same. 3. What is the average efficiency of a T/F and an induction motor and what is the reason for the difference ? 4. Explain the various losses in an induction motor.Power system protection came next with questions like 1. Explain the protection schemes for induction motors? 2.Draw the protection scheme against inter turn faults.
Finally a general question was asked " what is the difference between a ceiling and table fan?" ( think about this)
Tips: Be absolutely clear with the fundamentals of the subject and build each new topic or subject from them as these are the things tested in an interview. Make sure you have a thorough grasp on the areas related to your projects. Remember that the interviewer is from a company, not from academia and so the chances of him asking you to solve a theoretical problem is very less. Have awareness about the real world apart from the ideality in textbooks as that is expected from an engineer.
Round: HR Interview
Experience: The interview started off as usual with "tell me about yourself". Some of the questions that followed were 1. What are your hobbies? I mentioned poetry as one. 2. Do you remember any of your works? 3. What qualities you look for in a person and prioritize them. 4. If you are absorbed in a company and one of your project has been delayed
by 6 months, what sort of work would you engage yourself during the 9 idle hours in the company? 5. One of your colleagues has gone on leave and you are asked to take up his/her work by your boss in addition to your already rigorous assignment. What would be your reaction and explain it scientifically. The further questions were on a
lighter note. Why did your SGPA fall in the 3rd semester? How much money do you get from your father monthly and how do you use it generally? Being interested in power systems why don't you opt for research like M.Tech/MS or a PhD? If provide an opportunity by the company to pursue higher studies will you opt? Any workplace
preferences? And finally any questions you would like to ask us?
Tips: Have confidence in your self as this is what separates a winner from a looser.
Skills: C, C++, OS, SQL,
College Name: NIT WARANGAL
Experience: The technical test was conducted first. Questions were mainly from Power systems and a few from basic circuit theory. In fact the questions from power systems were taken from Wadhwa.As for the general aptitude test, time was the major constraint, the questions being relatively straight forward.Separate cutoffs were there for each test and calculators were allowed.
Tips: Be absolutely clear with the fundamentals of the subjects.
Duration: 75 minutes
Round: Technical Interview
Experience: The technical interview started off with details regarding my summer project at BARC, Mumbai. The project involved modeling and simulation of the nuclear reactor. I was asked the basic principles involved in energy conversion in a nuclear reactor. Further specifications of various subsystems like generator capacity, voltage, transformer ratings etc. were asked. The package(Labview) and the language(C) used for the project were also inquired. Questions regarding electric machines followed like 1. What would happen if dc is used in transformers? 2. Draw the output for the same. 3. What is the average efficiency of a T/F and an induction motor and what is the reason for the difference ? 4. Explain the various losses in an induction motor.Power system protection came next with questions like 1. Explain the protection schemes for induction motors? 2.Draw the protection scheme against inter turn faults.
Finally a general question was asked " what is the difference between a ceiling and table fan?" ( think about this)
Tips: Be absolutely clear with the fundamentals of the subject and build each new topic or subject from them as these are the things tested in an interview. Make sure you have a thorough grasp on the areas related to your projects. Remember that the interviewer is from a company, not from academia and so the chances of him asking you to solve a theoretical problem is very less. Have awareness about the real world apart from the ideality in textbooks as that is expected from an engineer.
Round: HR Interview
Experience: The interview started off as usual with "tell me about yourself". Some of the questions that followed were 1. What are your hobbies? I mentioned poetry as one. 2. Do you remember any of your works? 3. What qualities you look for in a person and prioritize them. 4. If you are absorbed in a company and one of your project has been delayed
by 6 months, what sort of work would you engage yourself during the 9 idle hours in the company? 5. One of your colleagues has gone on leave and you are asked to take up his/her work by your boss in addition to your already rigorous assignment. What would be your reaction and explain it scientifically. The further questions were on a
lighter note. Why did your SGPA fall in the 3rd semester? How much money do you get from your father monthly and how do you use it generally? Being interested in power systems why don't you opt for research like M.Tech/MS or a PhD? If provide an opportunity by the company to pursue higher studies will you opt? Any workplace
preferences? And finally any questions you would like to ask us?
Tips: Have confidence in your self as this is what separates a winner from a looser.
Skills: C, C++, OS, SQL,
College Name: NIT WARANGAL
4 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: First 30 minutes consisted of reasoning,verbal and quantitative. it was very easy though had to be little careful.they had a cut off for it.the next 30 minutes comprised of technical questions. they were relatively good. test covered all the subjects (major) .
Tips: Good basic knowledge was required to crack this test.overall the test was not that difficult but needed a little preparation in subjects(major).
Duration: 60 minutes
Round: Technical Interview
Experience: The technical interview was really good.they asked me what subject i liked and started asking questions on it .I said
optimization techniques and they asked me about the techniques and their application is civil engineering.Then they asked me about IS-875 the wind coefficients and what are they and represent. he asked me what is basic wind speed(the definition!!).then they asked me shear joining and moment joining, their definitions.finally they gave me a square steel structure and asked me weather it is stable or not.
Tips: Although it was not that difficult but you must be aware of IS-875 .if you want to get into TCE is that you have to technically strong or you should be able to convince the interviewer that you are technically strong.
Round: HR Interview
Experience: HR interview was very cool.they asked me how was my written test. how did my interview go.my interests.asked me
about my self.then we discussed on movies and sports and hostel life.finally they asked me any questions..
Skill Tips: Focus on basics of subjects.
Skills: OPtimization techniques, Shear joining, Moment joining
College Name: NIT WARANGAL
Experience: First 30 minutes consisted of reasoning,verbal and quantitative. it was very easy though had to be little careful.they had a cut off for it.the next 30 minutes comprised of technical questions. they were relatively good. test covered all the subjects (major) .
Tips: Good basic knowledge was required to crack this test.overall the test was not that difficult but needed a little preparation in subjects(major).
Duration: 60 minutes
Round: Technical Interview
Experience: The technical interview was really good.they asked me what subject i liked and started asking questions on it .I said
optimization techniques and they asked me about the techniques and their application is civil engineering.Then they asked me about IS-875 the wind coefficients and what are they and represent. he asked me what is basic wind speed(the definition!!).then they asked me shear joining and moment joining, their definitions.finally they gave me a square steel structure and asked me weather it is stable or not.
Tips: Although it was not that difficult but you must be aware of IS-875 .if you want to get into TCE is that you have to technically strong or you should be able to convince the interviewer that you are technically strong.
Round: HR Interview
Experience: HR interview was very cool.they asked me how was my written test. how did my interview go.my interests.asked me
about my self.then we discussed on movies and sports and hostel life.finally they asked me any questions..
Skill Tips: Focus on basics of subjects.
Skills: OPtimization techniques, Shear joining, Moment joining
College Name: NIT WARANGAL
5 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: One written test. It contains two sections. Both the sections are of 30 minutes each.
Tips: Refer Quantitative Aptitude by R.S Agarwal.
Duration: 60 minutes
Round: Technical Interview
Experience: My interview was of around 40 minutes duration.
In this they covered all the major subjects. First they asked me on B.Tech project.They spend more time on this only. After that they asked me on power systems basics, machines basics and drives basics.
Tips: You must know all your basics and your project very well.
Round: HR Interview
Experience: My interview was of around 15 minutes duration.General HR round questions were asked.
Tips: You must justify yourself with your answers.
General Tips: Brush up all the basics of your core subjects.
Skills: Good technical skills., Analyzing and problem solving skills.
College Name: NIT WARANGAL
Experience: One written test. It contains two sections. Both the sections are of 30 minutes each.
Tips: Refer Quantitative Aptitude by R.S Agarwal.
Duration: 60 minutes
Round: Technical Interview
Experience: My interview was of around 40 minutes duration.
In this they covered all the major subjects. First they asked me on B.Tech project.They spend more time on this only. After that they asked me on power systems basics, machines basics and drives basics.
Tips: You must know all your basics and your project very well.
Round: HR Interview
Experience: My interview was of around 15 minutes duration.General HR round questions were asked.
Tips: You must justify yourself with your answers.
General Tips: Brush up all the basics of your core subjects.
Skills: Good technical skills., Analyzing and problem solving skills.
College Name: NIT WARANGAL
5 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: One written test. It contains five sections.
The first sections is of 5 minutes duration.
The second sections is of 5 minutes duration.
The third sections is of 5 minutes duration.
The fourth sections is of 5 minutes duration.
The fifth sections is of 30 minutes duration.
Tips: In Aptitude the questions are easier touching the standard questions from R.S Agarwal.
In Technical study the core subjects like strength of materials, structural analysis, RCC, Steel, PSC Questions on degree of freedom, load balancing concept in PSC, Beams of uniform strength in SM, Permissible stresses in steel etc.
Duration: 50 minutes
Round: Technical Interview
Experience: The panel consists of two persons one technical and one HR. They asked about the favorite subject in M.Tech and they asked questions in remaining subjects leaving that subject. The question are in a sequential order starting from basics they mainly concentrated on the structural analysis , and design of structures. Question like BM of portal sway frames , design of beam for torque, design of eccentrically loaded footing, design of column ,drawing of torque diagrams, etc.
Tips: Be sure with all the basics of your subjects.
Round: HR Interview
Experience: In technical interview simultaneously they asked HR questions.
Tips: Be confident in what you are speaking.
General Tips: Brush up all the basics of your core subjects.
Skills: Good technical skills., Analyzing and problem solving skills.
College Name: NIT WARANGAL
Experience: One written test. It contains five sections.
The first sections is of 5 minutes duration.
The second sections is of 5 minutes duration.
The third sections is of 5 minutes duration.
The fourth sections is of 5 minutes duration.
The fifth sections is of 30 minutes duration.
Tips: In Aptitude the questions are easier touching the standard questions from R.S Agarwal.
In Technical study the core subjects like strength of materials, structural analysis, RCC, Steel, PSC Questions on degree of freedom, load balancing concept in PSC, Beams of uniform strength in SM, Permissible stresses in steel etc.
Duration: 50 minutes
Round: Technical Interview
Experience: The panel consists of two persons one technical and one HR. They asked about the favorite subject in M.Tech and they asked questions in remaining subjects leaving that subject. The question are in a sequential order starting from basics they mainly concentrated on the structural analysis , and design of structures. Question like BM of portal sway frames , design of beam for torque, design of eccentrically loaded footing, design of column ,drawing of torque diagrams, etc.
Tips: Be sure with all the basics of your subjects.
Round: HR Interview
Experience: In technical interview simultaneously they asked HR questions.
Tips: Be confident in what you are speaking.
General Tips: Brush up all the basics of your core subjects.
Skills: Good technical skills., Analyzing and problem solving skills.
College Name: NIT WARANGAL
5 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: One written test. It contains two sections. Each section is of 30 minutes.
Aptitude questions were asked from basics. But time factor is the most important during the test.
Technical questions were simple basics which are covered all the syllabus of our course.
Tips: You must be good in both aptitude and technical.
Duration: 60 minutes
Round: Technical Interview
Experience: All the questions are from basics. They touched Strength of Materials, IC Engines, Heat Transfer.
Tips: You must know all your basics of your core subjects.
Round: HR Interview
Experience: Few general questions were asked.
Tips: Never bluff in an interview.
General Tips: Brush up all the basics of your core subjects.
Co
Skills: Analyzing and problem solving skills., Good technical skills.
College Name: NIT WARANGAL
Experience: One written test. It contains two sections. Each section is of 30 minutes.
Aptitude questions were asked from basics. But time factor is the most important during the test.
Technical questions were simple basics which are covered all the syllabus of our course.
Tips: You must be good in both aptitude and technical.
Duration: 60 minutes
Round: Technical Interview
Experience: All the questions are from basics. They touched Strength of Materials, IC Engines, Heat Transfer.
Tips: You must know all your basics of your core subjects.
Round: HR Interview
Experience: Few general questions were asked.
Tips: Never bluff in an interview.
General Tips: Brush up all the basics of your core subjects.
Co
Skills: Analyzing and problem solving skills., Good technical skills.
College Name: NIT WARANGAL
5 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: One written test. It contains two sections. Each section is of 30 minutes.
Technical questions were from thermodynamics, IC engines, manufacturing technology, fluid dynamics, etc.
Aptitude questions were simple.
Tips: You must know all your basics in core subjects if you want to clear the first round.
Duration: 60 minutes
Round: Technical Interview
Experience: I drew the Rankin cycle and explained the differences from that of Carnot cycle.
Tips: You must be well versed with your basics.
Round: HR Interview
Experience: General HR round questions were asked. I was also given an opportunity to ask any questions.
Tips: Make use of the opportunity to ask questions to the HR.
General Tips: Brush up all the basics of your core subjects.
Skills: Analyzing and problem solving skills., Good technical skills.
College Name: NIT WARANGAL
Experience: One written test. It contains two sections. Each section is of 30 minutes.
Technical questions were from thermodynamics, IC engines, manufacturing technology, fluid dynamics, etc.
Aptitude questions were simple.
Tips: You must know all your basics in core subjects if you want to clear the first round.
Duration: 60 minutes
Round: Technical Interview
Experience: I drew the Rankin cycle and explained the differences from that of Carnot cycle.
Tips: You must be well versed with your basics.
Round: HR Interview
Experience: General HR round questions were asked. I was also given an opportunity to ask any questions.
Tips: Make use of the opportunity to ask questions to the HR.
General Tips: Brush up all the basics of your core subjects.
Skills: Analyzing and problem solving skills., Good technical skills.
College Name: NIT WARANGAL
5 Interview Rounds
Interview Preparation Tips
Round: Test
Experience: One written test. It contains two section. Each section is of 30 minutes.In technical, questions were asked from thermodynamics, fluid mechanics and design.
Tips: Be well versed in the basics of your core subjects.
Duration: 60 minutes
Round: Technical Interview
Experience: Questions were asked from the favorite topic I selected. I said it was thermodynamics. He also asked me a problem linking all the three questions with some relation.
Tips: Choose the topic that you know well as your favorite topic.
Round: HR Interview
Experience: General HR round questions were asked.
Tips: Be confident while answering.
General Tips: Brush up all the basics of your core subjects.
Skills: Analyzing and problem solving skills., Good technical skills.
College Name: NIT WARANGAL
Experience: One written test. It contains two section. Each section is of 30 minutes.In technical, questions were asked from thermodynamics, fluid mechanics and design.
Tips: Be well versed in the basics of your core subjects.
Duration: 60 minutes
Round: Technical Interview
Experience: Questions were asked from the favorite topic I selected. I said it was thermodynamics. He also asked me a problem linking all the three questions with some relation.
Tips: Choose the topic that you know well as your favorite topic.
Round: HR Interview
Experience: General HR round questions were asked.
Tips: Be confident while answering.
General Tips: Brush up all the basics of your core subjects.
Skills: Analyzing and problem solving skills., Good technical skills.
College Name: NIT WARANGAL
Campus Placement Interview Questions at Top Colleges
- Indian Institute of Technology (IIT), Chennai Placement Interview Questions
- Maharaja Agrasen Institute of Technology, Delhi Placement Interview Questions
- National Institute of Technology (NIT), Warangal Placement Interview Questions
- Indian Institute of Management (IIM), Lucknow Placement Interview Questions
- Indian Institute of Technology (IIT), Kanpur Placement Interview Questions
- Show more
- Home >
- colleges >
- national institute of technology nit warangal placement interview questions