TCE BIM Engineer Interview Questions and Answers

Q1. Technical questions
Add your answer
Q2. Piping material code
Add your answer

Q1. Technical questions
Add your answer
Q2. Piping erection fitup and material code
Add your answer

Q1. Technical questions
Add your answer
Q2. Piping welding related
Add your answer

Aptitude test was not prompt

Q1. They mentioned personal interview for technical round
Add your answer
Q2. They took technical interview and then gave detailing work.
Add your answer

Q1. Hr is very poor
Add your answer

Q1. What is mean by shear key
Ans. 
Shear key is a device used to transfer shear forces between two components in a structure.
• Shear keys are typically used in construction joints to prevent sliding between adjacent components.

• They are designed to resist horizontal forces and ensure stability.

• Shear keys can be found in structures such as bridges, buildings, and dams.

• Examples include shear keys in bridge expansion joints to prevent movement between bridge
Answered by AI
Add your answer
Q2. Different between columns and beams
Ans. 
Columns are vertical structural members that support loads, while beams are horizontal members that transfer loads to columns or walls.
• Columns are vertical and primarily support compressive loads.

• Beams are horizontal and primarily support bending loads.

• Columns are typically taller than they are wide, while beams are typically wider than they are tall.

• Examples: In a building, columns support the weight of the floors abo...read more
Answered by AI
Add your answer

Q1. What are your expectations
Ans. 
I expect challenging projects, opportunities for growth, supportive team environment, and work-life balance.
• Challenging projects that allow me to utilize my skills and knowledge

• Opportunities for professional growth and development

• Supportive team environment where collaboration and communication are valued

• Work-life balance to ensure productivity and well-being
Answered by AI
Add your answer
Q2. Your past experience
Ans. 
I have 5 years of experience working as a Design Engineer in the automotive industry.
• Designed components for new vehicle models

• Collaborated with cross-functional teams to ensure design met requirements

• Utilized CAD software to create detailed drawings

• Performed testing and analysis on prototypes

• Implemented design changes based on feedback and testing results
Answered by AI
Add your answer

Q1. What you do in your last company
Add your answer

Q1. Telephonic interview
Add your answer
Q2. Regarding the design
Add your answer

Q1. How many methods are used to forecast population
Ans. 
There are multiple methods used to forecast population.
• Demographic analysis

• Cohort-component method

• Time series analysis

• Mathematical models

• Survival analysis

• Migration analysis
Answered by AI
View 2 more answers
Q2. How to calculate ESR capacity
Ans. 
ESR capacity can be calculated by measuring the equivalent series resistance (ESR) of a component or circuit.
• ESR capacity is determined by measuring the ESR of the component or circuit.

• ESR is the resistance that exists in series with the ideal capacitance of a component.

• To calculate ESR capacity, use an ESR meter or measure the voltage drop across a known current.

• ESR capacity is important in determining the performance...read more
Answered by AI
View 1 more answer
Q3. What is the peak factor are used for Distribution design
Ans. 
Peak factors are used in distribution design to account for peak loads and ensure safe and efficient operation.
• Peak factors are used to determine the maximum load that a distribution system can handle.

• They take into consideration factors such as diversity of loads, power factor, and future growth.

• For example, a peak factor of 1.5 means that the system should be designed to handle 50% more than the average load.

• Peak fac...read more
Answered by AI
View 1 more answer
Q4. What is the minimum residual pressure in SVS
Ans. 
The minimum residual pressure in SVS refers to the lowest pressure that remains in the system after it has been depressurized.
• The minimum residual pressure is important to ensure the system is properly depressurized and safe for maintenance or repair.

• It is typically measured in units of pressure, such as psi or bar.

• The specific value of the minimum residual pressure can vary depending on the design and requirements of ...read more
Answered by AI
View 1 more answer
Q5. What is the Component in the water supply scheme
Ans. 
Components in a water supply scheme include pipes, pumps, valves, storage tanks, and treatment facilities.
• Pipes: Used to transport water from the source to the distribution network.

• Pumps: Provide the necessary pressure to move water through the system.

• Valves: Control the flow and direction of water within the scheme.

• Storage tanks: Store water for peak demand periods or emergencies.

• Treatment facilities: Purify and disin
Answered by AI
View 1 more answer
Q6. For Distribution system and Headwork what is the design period
Ans. 
The design period for distribution system and headwork refers to the expected lifespan or duration for which the system is designed to function effectively.
• The design period is determined based on factors such as expected growth, technological advancements, and maintenance requirements.

• It is important to consider the long-term needs and goals of the distribution system and headwork when determining the design period.

• Fo...read more
Answered by AI
View 1 more answer
Q7. For Design Pumping machinery and ESR what is the design period.
Ans. 
The design period for pumping machinery and ESR refers to the intended lifespan or duration of operation for the equipment.
• The design period is typically determined based on factors such as expected usage, maintenance requirements, and technological advancements.

• It is important to consider the design period when selecting materials, components, and manufacturing processes to ensure durability and reliability.

• For exampl...read more
Answered by AI
View 1 more answer

Q1. About JOB ROLE explanination
Add your answer
Q2. About the design process
Add your answer