Upload Button Icon Add office photos

Filter interviews by

Shapoorji Pallonji Group B Tech Civil Engineer Interview Questions and Answers

Updated 1 Aug 2023

Shapoorji Pallonji Group B Tech Civil Engineer Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
No response

I applied via Approached by Company

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Two ships are sailing in the sea on the two sides of a lighthouse. The angle of elevation of the top of the lighthouse is observed from the ships are 30° and 45° respectively. If the lighthouse is 100 m high, the distance between the two ships is:
173 m
200 m
273 m
300 m

Round 3 - HR 

(1 Question)

  • Q1. Who is in my house? Am I willing to go out of West Bengal if I get a job out of West Bengal?
Round 4 - Technical 

(1 Question)

  • Q1. Which lime is used for white washing
  • Ans. 

    Quicklime is used for white washing.

    • Quicklime, also known as calcium oxide, is used for white washing.

    • It is a white, caustic, alkaline substance that is produced by heating limestone in a kiln.

    • When water is added to quicklime, it undergoes a chemical reaction to form calcium hydroxide, which is used in white washing.

  • Answered by AI

I applied via Naukri.com and was interviewed in Dec 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1.  Is there any vacancy for fresher civil engineer??

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly keep calm and think positive and behave with recruiter like friendly and listen recruiter's questions carefully and give the answer. Maybe it is helpful.

B Tech Civil Engineer Interview Questions Asked at Other Companies

asked in AECOM
Q1. What is the process of earthquake design of a multi storey buildi ... read more
Q2. Mix ratio, concrete strength how many days does achieve strength?
Q3. Structure elements FW material and type Rate of pour, FW carrying ... read more
Q4. What is Total Flot and Free Floatof a Project ?
asked in AECOM
Q5. Draw bending moment diagram of a fixed beam subjected to udl thro ... read more

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. You are accept salary in this job
  • Q2. Why are hiring you in this company
  • Q3. We can hire you
Round 3 - One-on-one 

(8 Questions)

  • Q1. If you hiring this job and you can what do this organization
  • Q2. You can join larsen &toubro
  • Q3. Why you can for this organization
  • Q4. How i can select this organization
  • Q5. What do you do your father
  • Q6. How are yours family mambers
  • Q7. How is the possible
  • Q8. If you select then call to you
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Jadavpur University and was interviewed before Jul 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Very basic level aptitude test and civil engineering subjects test.

Round 2 - Technical 

(7 Questions)

  • Q1. Draw bending moment diagram of a fixed beam subjected to udl throughout the whole length.
  • Ans. 

    Bending moment diagram of a fixed beam subjected to udl throughout the whole length.

    • Calculate the reactions at the supports of the beam

    • Determine the equation for bending moment at any point along the beam

    • Plot the bending moment diagram with positive and negative values

    • The bending moment will be maximum at the supports and zero at the midpoint of the beam

  • Answered by AI
  • Q2. Draw bending moment diagram of a 1-bay, 1-storey portal frame subjected to point load at the middle point of the column.
  • Ans. 

    Bending moment diagram of a 1-bay, 1-storey portal frame with point load at column middle.

    • Calculate reactions at supports

    • Determine internal forces at critical points

    • Plot bending moment diagram using equations or software

    • Identify maximum bending moment and its location

  • Answered by AI
  • Q3. What is 'M' in M-20 concrete?
  • Ans. 

    M stands for mix design in M-20 concrete, indicating the compressive strength of the concrete mix.

    • M-20 concrete is a mix design where 'M' represents the compressive strength of the concrete after 28 days of curing.

    • The number '20' in M-20 concrete indicates the characteristic compressive strength of concrete in N/mm^2.

    • Different grades of concrete have different compressive strength requirements, with M-20 being a common

  • Answered by AI
  • Q4. Which code is req for mix design?
  • Ans. 

    IS 10262 is required for mix design in civil engineering.

    • IS 10262 is the code for concrete mix design in India.

    • It provides guidelines for proportioning of concrete ingredients based on strength and durability requirements.

    • The code covers various aspects such as water-cement ratio, workability, and compressive strength.

    • Mix design is crucial for ensuring the desired properties and performance of concrete.

    • Following the co...

  • Answered by AI
  • Q5. What is the process of earthquake design of a multi storey building?
  • Ans. 

    Earthquake design of a multi storey building involves analyzing seismic forces, selecting appropriate structural systems, and implementing design measures to ensure safety.

    • Analyze seismic forces based on the building location and seismic zone

    • Select appropriate structural systems such as reinforced concrete or steel frames

    • Implement design measures like base isolation, dampers, and shear walls to enhance building's seism

  • Answered by AI
  • Q6. Process of design of one-way and two-way slab and their differences
  • Ans. 

    Design process of one-way and two-way slabs and their differences

    • One-way slab design involves calculating bending moments and shear forces along one direction, typically supported on two opposite sides. Two-way slab design considers bending moments and shear forces in both directions, usually supported on all four sides.

    • One-way slab design is simpler and more common in practice, while two-way slab design is more comple...

  • Answered by AI
  • Q7. Difference between dynamic and equivalent static method of earthquake design and analysis of multi storey building
  • Ans. 

    Dynamic method considers time history of earthquake while equivalent static method simplifies earthquake forces into equivalent static forces.

    • Dynamic method analyzes building response to actual time history of earthquake ground motion.

    • Equivalent static method simplifies earthquake forces into equivalent static forces based on simplified assumptions.

    • Dynamic method is more accurate but computationally intensive, while eq...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for AECOM B Tech Civil Engineer interview:
  • Structural Engineering
Interview preparation tips for other job seekers - Give more importance to structural engineering subjects.

I applied via Walk-in and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About civil engineer

Interview Preparation Tips

Interview preparation tips for other job seekers - Iam civil engineer in client
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

The goal of an aptitude test is to predict the ability to learn new skills

Round 2 - Technical 

(2 Questions)

  • Q1. What experience do you have that relates to this job role
  • Q2. Tell me about your final year projects

Interview Preparation Tips

Interview preparation tips for other job seekers - Send follow up mails
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one 

(11 Questions)

  • Q1. Scar drawing and technical point
  • Q2. With safety trying best output
  • Q3. Field requirement and safety first
  • Q4. Working area material properly staged
  • Q5. Focus on work quality
  • Q6. Be carefull with machinery
  • Q7. Everytime touch with workers
  • Q8. Given detail of senior timely
  • Q9. Proper discussion with senior
  • Q10. Touch with total staff
  • Ans. 

    Maintain regular communication and interaction with all staff members.

    • Regularly check in with staff to ensure they have the resources and support they need

    • Hold regular team meetings to discuss project progress and address any concerns

    • Encourage open communication and feedback from all team members

    • Provide opportunities for team building and collaboration

    • Lead by example by being accessible and approachable to all staff me

  • Answered by AI
  • Q11. Given 110% daily
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
-

I applied via Walk-in and was interviewed in Jun 2024. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Site Engineer 

(1 Question)

  • Q1. Building construction
Round 3 - Technical 

(1 Question)

  • Q1. Structure finishing work
Round 4 - Technical 

Interview Preparation Tips

Interview preparation tips for other job seekers - Dear/Sir

I am Mr.Brajesh kumar sharma currently jobs company capacity infraprojects limited at BSNL project MCTE mhow indore (M.P) position currntly in sr.engineer civil at work structure finishing
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Dec 2022. There were 2 interview rounds.

Round 1 - Coding Test 

Like,transportation engineering, irrigation engineering,geotachnical engineering

Round 2 - Assignment 

Design of structure, open channel flow, basic fluid mechanics..

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience...
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Technical engineer
  • Q2. My salary 800000
Round 2 - Technical 

(3 Questions)

  • Q1. Technical engineer
  • Q2. My salary 800000
  • Q3. Excavation Engineer

Interview Preparation Tips

Interview preparation tips for other job seekers - Excavation engineers sewerage project delhi

Shapoorji Pallonji Group Interview FAQs

How many rounds are there in Shapoorji Pallonji Group B Tech Civil Engineer interview?
Shapoorji Pallonji Group interview process usually has 4 rounds. The most common rounds in the Shapoorji Pallonji Group interview process are Technical, Resume Shortlist and Aptitude Test.

Tell us how to improve this page.

Shapoorji Pallonji Group B Tech Civil Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 423 Interviews
Tata Group Interview Questions
4.2
 • 357 Interviews
TCE Interview Questions
3.8
 • 247 Interviews
View all
Shapoorji Pallonji Group B Tech Civil Engineer Salary
based on 4 salaries
₹3.2 L/yr - ₹6 L/yr
6% more than the average B Tech Civil Engineer Salary in India
View more details
Deputy Manager
605 salaries
unlock blur

₹6 L/yr - ₹16.5 L/yr

Senior Engineer
426 salaries
unlock blur

₹4 L/yr - ₹12 L/yr

Construction Engineer
301 salaries
unlock blur

₹3 L/yr - ₹9 L/yr

Civil Site Engineer
227 salaries
unlock blur

₹1.5 L/yr - ₹9 L/yr

Civil Supervisor
223 salaries
unlock blur

₹1.5 L/yr - ₹5.6 L/yr

Explore more salaries
Compare Shapoorji Pallonji Group with

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

Adani Group

3.9
Compare

Mahindra & Mahindra

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview