Saipem Scaffolding Inspector Interview Questions and Answers

Q1. Scaffolding department very good
Add your answer
Q2. Ccic company very good
Add your answer
Q3. Worker communication very good
Add your answer
Q4. Worker supervisor Taal mein very good
Add your answer
Q5. Scaffolding material very good
Add your answer

Q1. Which device is used to prevent fire in gas cutting set ?
Ans. 
Flashback arrestor is used to prevent fire in gas cutting set.
• Flashback arrestor is a safety device designed to prevent the flame from traveling back into the gas supply line.

• It works by extinguishing the flame front before it can reach the gas source.

• There are different types of flashback arrestors for different gases such as oxygen, acetylene, propane, etc.
Answered by AI
Add your answer
Q2. What is the risk ?
Ans. 
The risk is the potential for harm, loss, or danger resulting from a specific hazard or situation.
• Risk is the likelihood of an event occurring and the potential consequences of that event.

• Identifying and assessing risks is crucial for developing effective safety measures.

• Examples of risks in a workplace include slips, trips, falls, exposure to hazardous chemicals, and equipment malfunctions.
Answered by AI
Add your answer

Q1. What is Hazard ?
Ans. 
A hazard is a potential source of harm or danger that could cause injury, illness, or damage to property.
• Hazard is anything that has the potential to cause harm.

• Hazards can be physical, chemical, biological, ergonomic, or psychosocial in nature.

• Examples of hazards include slippery floors, toxic chemicals, infectious diseases, poor ergonomics, and workplace stress.

• Identifying and controlling hazards is essential for mai
Answered by AI
Add your answer
Q2. What is the base of scaffolding ?
Ans. 
The base of scaffolding is the foundation or support structure on which the scaffolding is built.
• The base of scaffolding is typically made of sturdy materials such as steel or wood.

• It is important for the base to be level and stable to ensure the safety of workers using the scaffolding.

• Examples of base components include base plates, mud sills, and screw jacks.
Answered by AI
Add your answer

Crane loading unloading welding fire extinguisher cut injury welding

Q1. Crane load capacity crane loading unloading fire extinguisher welding grinding ppe
Add your answer
Q2. Fire work at Hieght confined space near miss
Ans. 
The question is unclear and requires further clarification.
• Can you please provide more context or details about the incident?

• What was the cause of the near miss?

• What safety measures were in place to prevent such incidents?

• Were there any injuries or damages as a result of the near miss?

• How can we improve safety procedures to prevent similar incidents in the future?
Answered by AI
Add your answer

Q1. Question for scaffolding and erection
Add your answer
Q2. How to make 2×2 scaffolding
Ans. 
2x2 scaffolding can be made using four 2x2 wooden poles and metal connectors.
• Get four 2x2 wooden poles of required length.

• Connect the poles using metal connectors to form a square base.

• Add vertical poles at each corner and secure them with metal connectors.

• Add horizontal poles at the top and bottom of the vertical poles to form the frame.

• Add diagonal braces for stability.

• Repeat the process for additional levels.

• Ensure
Answered by AI
View 1 more answer
Q3. How many date of inspection
Ans. 
The number of inspections depends on the type of scaffolding and its usage.
• The number of inspections can range from daily to yearly.

• The frequency of inspections is determined by the type of scaffolding and its usage.

• For example, suspended scaffolding used for window cleaning may require daily inspections, while a stationary scaffold used for construction may require weekly inspections.

• The number of inspections should b...read more
Answered by AI
Add your answer
Q4. How many clamp of scaffolding
Ans. 
The number of clamps required for scaffolding depends on the size and weight of the structure being built.
• The number of clamps needed for scaffolding varies depending on the size and weight of the structure being built

• The type of clamp used also affects the number required

• A qualified scaffolding inspector should be able to determine the appropriate number of clamps needed for a specific job
Answered by AI
Add your answer
Q5. What is scaffolding how to use
Ans. 
Scaffolding is a temporary structure used to support workers and materials during construction or maintenance of buildings.
• Scaffolding is made up of metal pipes, tubes, and wooden planks.

• It is erected around the building to provide a safe working platform for workers.

• Scaffolding should be inspected regularly to ensure it is safe to use.

• Workers should wear appropriate safety gear when using scaffolding.

• Examples of scaff...read more
Answered by AI
View 1 more answer

Q1. Daily work rue teen
Add your answer
Q2. Constration side
Add your answer
Q3. Tab dismantling work.
Add your answer
Q4. Tool box meeting process
Ans. 
Tool box meetings are regular safety meetings held on job sites to discuss potential hazards, safety procedures, and promote a safety culture.
• Tool box meetings are typically held at the beginning of each work shift or day.

• Topics discussed include recent incidents, near misses, safety reminders, and any new safety procedures.

• Employees are encouraged to actively participate by sharing their own experiences and suggestion...read more
Answered by AI
Add your answer
Q5. Permit to work training
Add your answer

Q1. What is the noted point
Ans. 
The noted point refers to a specific point or detail that has been highlighted or emphasized.
• The noted point is usually mentioned or marked for easy reference.

• It can be a key piece of information or a significant aspect that requires attention.

• For example, in a construction project, the noted point could be a safety guideline that must be strictly followed.

• In a meeting, the noted point could be a critical decision or a...read more
Answered by AI
View 3 more answers
Q2. Hanging scaffolding how make the work more capacity
Ans. 
To increase the capacity of hanging scaffolding, additional support systems can be used.
• Use outriggers or counterweights to provide stability and balance.

• Install diagonal braces to enhance the structural integrity.

• Ensure proper anchoring and tie-backs to prevent movement.

• Use stronger and thicker materials for the scaffold components.

• Regularly inspect and maintain the scaffolding to identify any weaknesses or defects.
Answered by AI
View 6 more answers
Q3. How many years experience in GCC and which of the client I you working.
Add your answer
Q4. How many degree ladder fixed
Ans. 
The number of degree ladder fixed depends on the specific requirements of the scaffolding project.
• The number of degree ladder fixed can vary depending on the height and configuration of the scaffolding.

• It is important to follow safety regulations and guidelines when determining the number of degree ladder fixed.

• The scaffolding supervisor should assess the project requirements and consult with engineers or safety expert...read more
Answered by AI
View 6 more answers
Q5. How many degree bracings
Ans. 
The number of degree bracings depends on the specific scaffolding design and requirements.
• The number of degree bracings can vary based on the height and width of the scaffolding structure.

• Degree bracings are used to provide stability and support to the scaffolding system.

• The specific number of degree bracings needed will be determined by a qualified scaffolding engineer or supervisor.

• Examples of degree bracings include...read more
Answered by AI
View 4 more answers

Q1. What is the hevey tower
Ans. 
The heavy tower is a structure used in construction projects to support heavy loads and provide stability.
• Heavy towers are typically made of steel or concrete to withstand the weight of equipment and materials.

• They are often used in conjunction with cranes to lift and move heavy objects.

• Heavy towers play a crucial role in ensuring the safety of workers and the success of construction projects.
Answered by AI
Add your answer
Q2. What is the TPI
Ans. 
TPI stands for Threads Per Inch, a measurement used in manufacturing and engineering to determine the number of threads on a screw or bolt.
• TPI is calculated by counting the number of threads within a one-inch length on a screw or bolt.

• Higher TPI values indicate finer threads, while lower TPI values indicate coarser threads.

• TPI is an important factor in determining the compatibility of nuts and bolts in mechanical assem
Answered by AI
Add your answer
Q3. What is the work parmit system
Ans. 
A work permit system is a formal written system used to control certain types of work that are potentially hazardous.
• Work permit systems ensure that proper precautions are taken before high-risk work is carried out.

• They typically involve a written permit that must be obtained before work begins.

• Examples of work permit systems include hot work permits, confined space entry permits, and excavation permits.
Answered by AI
Add your answer
Q4. What is the lifting work system
Ans. 
The lifting work system refers to the process and procedures in place for safely lifting and moving heavy objects in the workplace.
• Involves assessing the weight and size of the object to be lifted

• Determining the appropriate lifting equipment to use

• Ensuring proper lifting techniques are followed to prevent injuries

• Training employees on safe lifting practices

• Implementing protocols for team lifts when necessary
Answered by AI
Add your answer
Q5. What is the welding work hazard s
Ans. 
Welding work hazards include exposure to fumes, gases, radiation, and electrical hazards.
• Exposure to welding fumes can lead to respiratory issues and metal fume fever.

• Gases produced during welding, such as carbon monoxide and nitrogen oxides, can be harmful if inhaled.

• Radiation from welding arcs can cause eye damage and skin burns.

• Electrical hazards can result from faulty equipment or improper grounding, leading to sho
Answered by AI
Add your answer