Upload Button Icon Add office photos

Bureau Veritas

Compare button icon Compare button icon Compare

Filter interviews by

Bureau Veritas Scaffolding Inspector Interview Questions, Process, and Tips

Updated 6 Dec 2022

Bureau Veritas Scaffolding Inspector Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed in Nov 2022. There was 1 interview round.

Round 1 - Technical 

(17 Questions)

  • Q1. How many tipe of scaffold.
  • Ans. 

    There are several types of scaffolds used in construction.

    • Supported scaffolds

    • Suspended scaffolds

    • Rolling scaffolds

    • Cantilever scaffolds

    • Mobile scaffolds

    • Trestle scaffolds

    • Tower scaffolds

    • Patented scaffolds

  • Answered by AI
  • Q2. How many people going on genaral duty scaffold.
  • Q3. How many people going on Liteduty scaffold.
  • Ans. 

    The number of people going on Liteduty scaffold depends on its load capacity and safety regulations.

    • The number of people allowed on a Liteduty scaffold is determined by its load capacity.

    • Safety regulations also play a role in determining the number of people allowed on the scaffold.

    • Consulting the manufacturer's guidelines and local safety regulations is essential to determine the maximum number of people.

    • Factors such a...

  • Answered by AI
  • Q4. How many bord use it hanging scaffold.
  • Ans. 

    The number of boards used in a hanging scaffold depends on the specific requirements of the project.

    • The number of boards used will vary based on the length and width of the scaffold.

    • The weight capacity of the scaffold will also determine the number of boards needed.

    • Additional boards may be required for safety measures, such as toe boards or guardrails.

    • The specific regulations and guidelines of the construction industry...

  • Answered by AI
  • Q5. How many times inspaction the scaffold.
  • Ans. 

    The scaffold should be inspected multiple times during its lifespan to ensure safety and compliance.

    • Scaffolds should be inspected before initial use to ensure proper assembly and stability.

    • Regular inspections should be conducted during the lifespan of the scaffold, especially after any modifications or adverse weather conditions.

    • Inspections should also be carried out after any incidents or accidents involving the scaff...

  • Answered by AI
  • Q6. How many capacity have special duty scaffold.
  • Ans. 

    The capacity of special duty scaffolds varies depending on their design and purpose.

    • Special duty scaffolds are designed to support heavy loads or provide access to difficult areas.

    • The capacity of special duty scaffolds can range from a few hundred pounds to several thousand pounds.

    • Factors that determine the capacity include the type of scaffold, its materials, and the configuration.

    • For example, a heavy-duty steel scaff...

  • Answered by AI
  • Q7. How many days remove the scaffold.
  • Ans. 

    The number of days to remove a scaffold depends on various factors such as the size and complexity of the scaffold, weather conditions, and safety regulations.

    • The duration to remove a scaffold can range from a few hours to several days.

    • Factors like the height and size of the scaffold, the number of workers involved, and the complexity of the structure can affect the time required for removal.

    • Weather conditions, such as...

  • Answered by AI
  • Q8. Scaffolding eraction time which tag fixing.
  • Ans. 

    The time required for scaffolding erection and tag fixing.

    • The scaffolding erection time depends on various factors such as the size and complexity of the structure, the number of workers involved, and their experience.

    • Tag fixing refers to the process of attaching identification tags or labels to the scaffolding components for safety and compliance purposes.

    • The time taken for tag fixing can vary depending on the number ...

  • Answered by AI
  • Q9. Scaffolding tube iner daya how much.
  • Ans. 

    The inner diameter of a scaffolding tube varies depending on the specific type and manufacturer.

    • The inner diameter of a scaffolding tube can range from 26mm to 40mm.

    • Different countries may have different standards for scaffolding tube inner diameter.

    • The inner diameter of a scaffolding tube affects its load-bearing capacity and stability.

    • It is important to consult the manufacturer's specifications or industry standards ...

  • Answered by AI
  • Q10. How much thignes tub use in scaffold
  • Ans. 

    The amount of things to use in a scaffold depends on the specific requirements of the project.

    • The number of things to use in a scaffold will vary depending on the height and size of the scaffold.

    • The weight capacity of the scaffold should also be considered when determining the number of things to use.

    • Local regulations and safety standards may dictate the minimum number of things required for a scaffold.

    • Examples of thin...

  • Answered by AI
  • Q11. How many tips tie used in scaffolding
  • Ans. 

    The number of tie used in scaffolding varies depending on the height and complexity of the structure.

    • The number of ties used in scaffolding is determined by the height and complexity of the structure.

    • Ties are used to provide stability and prevent the scaffolding from swaying or collapsing.

    • The general rule is to have a minimum of one tie for every 4 meters of scaffolding height.

    • Additional ties may be required at corners...

  • Answered by AI
  • Q12. How much people going on mobile scaffold
  • Ans. 

    The number of people allowed on a mobile scaffold depends on its design and load capacity.

    • The maximum number of people allowed on a mobile scaffold should be specified by the manufacturer or in the scaffold's design documentation.

    • Factors such as the scaffold's dimensions, materials used, and load capacity determine the number of people it can safely accommodate.

    • It is important to follow the manufacturer's guidelines an...

  • Answered by AI
  • Q13. Mobile scaffold has been used for
  • Ans. 

    Mobile scaffold has been used for various purposes in construction and maintenance work.

    • Providing a safe working platform at elevated heights

    • Facilitating access to hard-to-reach areas

    • Supporting workers and materials during construction or maintenance tasks

    • Allowing for easy movement and repositioning on site

    • Enhancing productivity and efficiency in work processes

  • Answered by AI
  • Q14. How many lenth the scaffold tub
  • Ans. 

    The length of the scaffold tub varies depending on the specific requirements of the construction project.

    • The length of the scaffold tub can range from a few feet to several meters.

    • It is important to consider the height and width of the structure being built when determining the length of the scaffold tub.

    • The length of the scaffold tub may also be influenced by safety regulations and guidelines.

    • For example, if a scaffol...

  • Answered by AI
  • Q15. How many degrees used the ladder
  • Ans. 

    The ladder used for scaffolding typically has an angle of 75 degrees.

    • The ladder used for scaffolding is usually set at a specific angle to ensure stability and safety.

    • The most common angle for a scaffolding ladder is 75 degrees.

    • This angle provides a good balance between ease of climbing and stability.

    • Using a ladder with the correct angle is important to prevent accidents and ensure the safety of workers.

  • Answered by AI
  • Q16. 6miter ladder how much place tie
  • Ans. 

    The 6-meter ladder requires a certain amount of space to be tied securely.

    • The amount of space required to tie a 6-meter ladder depends on the specific regulations and guidelines of the scaffolding industry.

    • Generally, a 6-meter ladder should be tied at a distance of 1 meter from the top support point.

    • The ladder should also be tied at a distance of 4 meters from the bottom support point.

    • These distances ensure stability a...

  • Answered by AI
  • Q17. How much capacity the right-angle coupler B stander
  • Ans. 

    The right-angle coupler B stander has a capacity of X units.

    • The capacity of the right-angle coupler B stander is determined by its design and material.

    • The specific capacity of the right-angle coupler B stander should be provided by the manufacturer or supplier.

    • It is important to ensure that the right-angle coupler B stander is used within its specified capacity to maintain safety and structural integrity.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Very good experience and good behavior to clients 👍 👏 👌

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Normal questions regarding civil engineering subjects

Interview Preparation Tips

Interview preparation tips for other job seekers - Dont be too nervous. Be normal and answer the questions. If not know any answer just say no.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Electrical and Electronic test

Round 2 - Technical 

(1 Question)

  • Q1. All technical questions do the basic theory properly

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare very well for the interview
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Dissuasion for past company work
  • Q2. Asking qualification
Round 2 - Technical 

(2 Questions)

  • Q1. Types of brick and how to check brick quality, Cement IS code and how to check quality, Pipe IS code
  • Ans. 

    Types of brick, how to check brick quality, Cement IS code and quality check, Pipe IS code

    • Types of bricks include clay bricks, concrete bricks, fly ash bricks, etc.

    • To check brick quality, look for uniform shape, size, color, sound when struck, and absence of cracks.

    • Cement quality is checked using IS code 12269:1987. Quality can be checked by conducting tests like fineness, setting time, compressive strength, etc.

    • Pipe q...

  • Answered by AI
  • Q2. Asking, BBS Over had tank , Pipe jointing , and other questions
Round 3 - HR 

(1 Question)

  • Q1. Salary dissuasion,
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Dec 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Work experience
  • Q2. Last company details and qualifications
Round 2 - Technical 

(2 Questions)

  • Q1. Brick test compressive strength, Over hand tank like columns dom zik etc.
  • Q2. Quality test cement test , cube test , slump , temperature test curing HDPE pipe IS code life , Manhole , Pipe laying etc
Round 3 - HR 

(1 Question)

  • Q1. Salary dissuasion

Interview Questionnaire 

3 Questions

  • Q1. Introduce yourself?
  • Q2. How will you test about leakage of oil in Transformer?
  • Ans. 

    Testing for oil leakage in transformers involves visual inspection, oil analysis, and pressure testing.

    • Visual inspection of the transformer for any signs of oil leakage

    • Oil analysis to check for any abnormal levels of dissolved gases or contaminants

    • Pressure testing to check for any leaks in the transformer's oil-filled compartments

    • Use of ultrasonic testing to detect any leaks in the transformer's tank

    • Regular maintenance

  • Answered by AI
  • Q3. How will you find out an error after completing the work of any Feeder?
  • Ans. 

    I will conduct a thorough testing and inspection process to identify any errors in the Feeder.

    • Perform visual inspection of the Feeder

    • Conduct electrical testing to ensure proper functioning

    • Check for any loose connections or damaged components

    • Compare the Feeder's performance to the expected results

    • Review any error logs or system alerts

    • Consult with colleagues or experts for additional input

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview should be in previous work experience.
Also related to B.Tech. stream.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

General SSC level aptitude

Round 3 - Technical 

(1 Question)

  • Q1. Online test is hard, post that interview is mediocre

Interview Preparation Tips

Topics to prepare for Medhaj Techno Concept Senior Engineer interview:
  • Jal jivan mission projects
Interview preparation tips for other job seekers - Be confident and show intent to work.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Brief knowledge of civil engineering and building construction

I applied via Recruitment Consultant and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical and management

Interview Preparation Tips

Interview preparation tips for other job seekers - You can do interview without any hesitation.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. IS ans IEC standard testing process and methods.

Bureau Veritas Interview FAQs

How many rounds are there in Bureau Veritas Scaffolding Inspector interview?
Bureau Veritas interview process usually has 2 rounds. The most common rounds in the Bureau Veritas interview process are Resume Shortlist and Technical.
What are the top questions asked in Bureau Veritas Scaffolding Inspector interview?

Some of the top questions asked at the Bureau Veritas Scaffolding Inspector interview -

  1. How much capacity the right-angle coupler B stan...read more
  2. How many people going on Liteduty scaffo...read more
  3. How many tipe of scaffo...read more

Tell us how to improve this page.

Bureau Veritas Scaffolding Inspector Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

SGS Interview Questions
3.9
 • 93 Interviews
TÜV NORD Interview Questions
3.8
 • 63 Interviews
TÜV SÜD Interview Questions
3.9
 • 63 Interviews
CMS Infosystems Interview Questions
3.6
 • 54 Interviews
Intertek Interview Questions
3.8
 • 51 Interviews
Cashify Interview Questions
3.8
 • 40 Interviews
Titan Eye Plus Interview Questions
4.3
 • 30 Interviews
Reliance Group Interview Questions
4.1
 • 20 Interviews
View all
Bureau Veritas Scaffolding Inspector Salary
based on 7 salaries
₹5.5 L/yr - ₹6.6 L/yr
At par with the average Scaffolding Inspector Salary in India
View more details

Bureau Veritas Scaffolding Inspector Reviews and Ratings

based on 4 reviews

4.0/5

Rating in categories

4.3

Skill development

3.1

Work-life balance

4.4

Salary

2.7

Job security

4.4

Company culture

3.0

Promotions

3.7

Work satisfaction

Explore 4 Reviews and Ratings
Surveyor
221 salaries
unlock blur

₹2.5 L/yr - ₹10.4 L/yr

Project Coordinator
177 salaries
unlock blur

₹2 L/yr - ₹8 L/yr

Quality Inspector
177 salaries
unlock blur

₹1.6 L/yr - ₹9.7 L/yr

Chemist
150 salaries
unlock blur

₹1.7 L/yr - ₹5.2 L/yr

Senior Surveyor
125 salaries
unlock blur

₹4.8 L/yr - ₹15 L/yr

Explore more salaries
Compare Bureau Veritas with

SGS

3.9
Compare

CMS Infosystems

3.6
Compare

Intertek

3.7
Compare

Medhaj Techno Concept

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview