Upload Button Icon Add office photos

Bureau Veritas

Compare button icon Compare button icon Compare

Filter interviews by

Bureau Veritas Inspection Engineer Interview Questions, Process, and Tips

Updated 27 Apr 2024

Top Bureau Veritas Inspection Engineer Interview Questions and Answers

  • Q1. Which code is to be used as per ASME for transportation of Hydro carbon Fluids as per ASME Sec VIII Div.1?
  • Q2. Which NDT is used to measure sub surface defects below 12mm?
  • Q3. What is the hydrotest pressure of vessel, as MAWP=1MPa?
View all 10 questions

Bureau Veritas Inspection Engineer Interview Experiences

3 interviews found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Mechanical Inspection related question
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How much gap required in fit-up of pipes.?
  • Ans. 

    The gap required in fit-up of pipes depends on the welding process and material being used.

    • The gap for TIG welding is typically 1/16 to 1/8 inch.

    • For MIG welding, the gap can be slightly larger, around 3/32 to 1/8 inch.

    • The gap should be uniform along the entire length of the joint for proper welding.

    • The material being welded also influences the gap size, with thicker materials requiring larger gaps.

  • Answered by AI
  • Q2. What is IQI in radiography testing
  • Ans. 

    IQI stands for Image Quality Indicator, used in radiography testing to ensure the quality of the radiographic image.

    • IQI is a tool used to determine the quality of radiographic images by measuring the image quality parameters such as contrast, resolution, and sensitivity.

    • It consists of a series of patterns or objects with specific details that are placed on the radiographic film along with the test object.

    • The IQI is the...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Go through codes and standards before going for interview such as ASME SECTION 8, SECTIONS 9, SECTION 5, SECTION 2

Inspection Engineer Interview Questions Asked at Other Companies

asked in RITES
Q1. What is least count of any measuring instrument?
asked in Adani Gas
Q2. WHAT YOUR MDPE PIPE TOP COVER OF GROUND LEVEL
Q3. What is full process of Diaphragm wall construction?
asked in RITES
Q4. Why tractors have larger rear wheels?
Q5. What is difference between Top bottom construction and Bottom Top ... read more

Inspection Engineer Interview Questions & Answers

user image NIDAMARTHI. SAIKIRAN

posted on 15 Mar 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(8 Questions)

  • Q1. Which instrument used for Surface preparation?
  • Ans. 

    The instrument used for surface preparation is a sandblaster.

    • Sandblaster is commonly used for surface preparation in industries like construction, automotive, and shipbuilding.

    • It uses compressed air to propel abrasive material at high velocity to smooth out rough surfaces or remove contaminants.

    • Examples of abrasive materials used in sandblasters include sand, garnet, and glass beads.

  • Answered by AI
  • Q2. What are the types of welding?
  • Ans. 

    Types of welding include arc welding, gas welding, resistance welding, and laser welding.

    • Arc welding: uses an electric arc to melt and join metals, such as MIG welding and TIG welding

    • Gas welding: uses a gas flame to melt and join metals, such as oxyacetylene welding

    • Resistance welding: uses electric resistance to generate heat and join metals, such as spot welding

    • Laser welding: uses a high-powered laser beam to melt and

  • Answered by AI
  • Q3. Which NDT is used to measure sub surface defects below 12mm?
  • Ans. 

    Ultrasonic Testing (UT) is used to measure sub surface defects below 12mm.

    • Ultrasonic Testing (UT) is a non-destructive testing method that uses high frequency sound waves to detect internal flaws in materials.

    • UT is commonly used in industries such as aerospace, automotive, and manufacturing to inspect for defects like cracks, voids, and inclusions.

    • The technique is effective for detecting sub surface defects as it can p...

  • Answered by AI
  • Q4. Which Film is used for radiography testing?
  • Ans. 

    X-ray film is commonly used for radiography testing.

    • X-ray film is sensitive to X-ray radiation and produces an image when exposed.

    • The film is placed behind the object being tested and exposed to X-rays.

    • After exposure, the film is developed to reveal any defects or abnormalities.

    • Common types of X-ray film include industrial radiographic film and medical radiographic film.

  • Answered by AI
  • Q5. What is difference between pipe and tube?
  • Ans. 

    Pipe is measured by its inner diameter, while tube is measured by its outer diameter.

    • Pipe is used to transport fluids or gases, while tube is often used for structural applications.

    • Pipe is typically manufactured to specific industry standards, while tube may have more varied dimensions and tolerances.

    • Examples: PVC pipe for plumbing, steel tube for construction.

  • Answered by AI
  • Q6. Tell any five IS codes
  • Ans. 

    Five important IS codes related to inspection engineering

    • IS 456: Code of practice for plain and reinforced concrete

    • IS 3370: Code of practice for concrete structures for storage of liquids

    • IS 800: Code of practice for general construction in steel

    • IS 1893: Criteria for earthquake resistant design of structures

    • IS 875: Code of practice for design loads for buildings and structures

  • Answered by AI
  • Q7. What is the hydrotest pressure of vessel, as MAWP=1MPa?
  • Ans. 

    The hydrotest pressure of a vessel with MAWP=1MPa is typically 1.5 times the MAWP.

    • Hydrotest pressure is usually 1.5 times the MAWP (Maximum Allowable Working Pressure)

    • For MAWP=1MPa, the hydrotest pressure would be 1.5 MPa

    • Hydrotest pressure ensures the vessel's structural integrity under pressure

  • Answered by AI
  • Q8. Which code is to be used as per ASME for transportation of Hydro carbon Fluids as per ASME Sec VIII Div.1?
  • Ans. 

    ASME B31.3 is the code used for transportation of Hydrocarbon Fluids as per ASME Sec VIII Div.1.

    • ASME B31.3 code is used for transportation of Hydrocarbon Fluids

    • ASME Sec VIII Div.1 is for pressure vessels, not transportation

    • Examples: ASME B31.3 code is used for pipelines carrying hydrocarbon fluids

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good and worthy, growth and prospects.

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What's your last experience
  • Q2. What's your current ctc
  • Q3. Are you married

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and ans all question confidently

Interview Questionnaire 

3 Questions

  • Q1. Roles and responsibilities of an inspection engineer.
  • Ans. 

    An inspection engineer is responsible for ensuring the safety, quality, and compliance of equipment, structures, or systems.

    • Conducting inspections to identify defects or non-compliance

    • Developing inspection procedures and protocols

    • Analyzing inspection data and preparing reports

    • Collaborating with other engineers and stakeholders

    • Ensuring compliance with regulations and standards

    • Implementing corrective actions to address i...

  • Answered by AI
  • Q2. If you have worked with consistency as an inspection engineer, I believe you may have no issues answering the question.
  • Q3. Your experience and your attitude towards your work speaks.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to your knowledge and present the same.

Interview Questionnaire 

2 Questions

  • Q1. This is how everyone tests MDPE how RFC do and later asked anything else.
  • Q2. Etc.

I applied via Naukri.com and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Written test about technical details covered ASME CODE

Round 2 - Technical 

(1 Question)

  • Q1. Personal interview for technical discussion and personal details

Interview Preparation Tips

Topics to prepare for TÜV NORD Inspection Engineer interview:
  • ASME Codes
Interview preparation tips for other job seekers - Be well prepared and then taken an interview
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Technical Questions regarding fabrication, welding, ASME codes and various standards.

Round 3 - Technical 

(1 Question)

  • Q1. Welding and fabrication.
Round 4 - HR 

(1 Question)

  • Q1. Family background and salary negotiation.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About your technical experience
Round 3 - One-on-one 

(1 Question)

  • Q1. Not so special just for knowing yourself

I applied via Walk-in and was interviewed in Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. NORMAL BAK GROUND CHECK & SALARY RELATED
  • Ans. GIVE YOUR DETAILS AND SALARY EXPECTATIONS
  • Answered Anonymously
Round 3 - Technical 

(1 Question)

  • Q1. REGARDING PRIVIOUS WORK, CODES, STANDARDS AND MANY OTHER TECHNICAL QUESTIONS RELATED TO JOB
  • Ans. PRAPARE WELL IN ADVANCE BEFORE FACING INTERVIEW
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - IF YOUR CURRENT COMPANY GIVE YOU HIKE IN SALARY AND TIME TO SPEND THEN THERE IS NO NEED TO JOIN ANY THIRD PARTY ANGIES IF NOT THEN YOU CAN GO FOR THIS JOB BUT THIS IS TOTALLY DIFFERENT WHAT YOU DO IN YOUR PREVIOUS JOB YOU HAVE TO VARIOUS JOBS AND TRAVEL A LOT MORE THAN YOU THOUGHT OF IT EVER.

Bureau Veritas Interview FAQs

How many rounds are there in Bureau Veritas Inspection Engineer interview?
Bureau Veritas interview process usually has 1-2 rounds. The most common rounds in the Bureau Veritas interview process are Technical and Resume Shortlist.
How to prepare for Bureau Veritas Inspection Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Bureau Veritas. The most common topics and skills that interviewers at Bureau Veritas expect are Quality Control, Quality Assurance, Inspection, Inspection Engineering and QC.
What are the top questions asked in Bureau Veritas Inspection Engineer interview?

Some of the top questions asked at the Bureau Veritas Inspection Engineer interview -

  1. Which code is to be used as per ASME for transportation of Hydro carbon Fluids...read more
  2. Which NDT is used to measure sub surface defects below 12...read more
  3. What is the hydrotest pressure of vessel, as MAWP=1M...read more

Tell us how to improve this page.

Bureau Veritas Inspection Engineer Interview Process

based on 3 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

SGS Interview Questions
3.9
 • 92 Interviews
TÜV NORD Interview Questions
3.7
 • 63 Interviews
TÜV SÜD Interview Questions
3.9
 • 61 Interviews
CMS Infosystems Interview Questions
3.6
 • 54 Interviews
Intertek Interview Questions
3.8
 • 50 Interviews
Cashify Interview Questions
3.8
 • 39 Interviews
Titan Eye Plus Interview Questions
4.3
 • 30 Interviews
View all
Bureau Veritas Inspection Engineer Salary
based on 111 salaries
₹3 L/yr - ₹12 L/yr
42% more than the average Inspection Engineer Salary in India
View more details

Bureau Veritas Inspection Engineer Reviews and Ratings

based on 34 reviews

4.3/5

Rating in categories

4.1

Skill development

4.0

Work-life balance

4.0

Salary

3.5

Job security

4.0

Company culture

3.4

Promotions

3.9

Work satisfaction

Explore 34 Reviews and Ratings
Surveyor
215 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Coordinator
180 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Inspector
162 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Chemist
151 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Surveyor
127 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bureau Veritas with

SGS

3.9
Compare

Intertek

3.8
Compare

TÜV NORD

3.8
Compare

DNV

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview