NEXUS Project Solutions Junior Structural Engineer Interview Questions and Answers

Q1. What is ph value of bentonite
Ans. 
The pH value of bentonite typically ranges from 8 to 10.
• Bentonite is a clay material commonly used in construction and engineering projects.

• The pH value of bentonite can vary depending on its source and composition.

• A pH value of 7 is considered neutral, so bentonite is slightly alkaline.

• The pH value of bentonite is important in determining its suitability for various applications.
Answered by AI
Add your answer
Q2. What is mean fe500
Ans. 
FE500 is a grade of steel used in construction, indicating its yield strength in megapascals.
• FE500 is a designation for a type of steel reinforcement used in construction

• The 'FE' stands for 'iron', while '500' indicates the minimum yield strength in megapascals

• FE500 steel is commonly used in reinforced concrete structures for its high strength and durability
Answered by AI
Add your answer

Q1. About your self
Add your answer
Q2. What is the difference between Fixed and Pinned connection in base plate?
Ans. 
Fixed connection does not allow rotation at the base plate, while pinned connection allows rotation.
• Fixed connection is rigid and does not allow rotation at the base plate.

• Pinned connection allows rotation at the base plate.

• Fixed connection provides more stability and resistance to lateral forces.

• Pinned connection is more flexible and allows for some movement.

• Examples: Fixed connection is commonly used in high-rise bui...read more
Answered by AI
Add your answer
Q3. What is the rise and trade in stair?
Ans. 
The rise is the vertical distance between two consecutive steps, while the tread is the horizontal distance.
• The rise is typically around 7-8 inches, while the tread is usually around 10-11 inches.

• The rise and tread dimensions are important for ensuring safe and comfortable stair design.

• Building codes often dictate the minimum and maximum rise and tread dimensions for safety reasons.
Answered by AI
Add your answer
Q4. What is the pitch distance in bolt?
Ans. 
Pitch distance in bolt refers to the distance between the centers of adjacent bolts in a bolted connection.
• Pitch distance is typically measured from the center of one bolt to the center of the next bolt in a row.

• It is important to maintain consistent pitch distances to ensure proper load distribution and structural integrity.

• For example, in a bolted connection with a pitch distance of 2 inches, the centers of adjacent
Answered by AI
Add your answer
Q5. Make pipe rack section on both direction
Ans. 
To create a pipe rack section on both directions.
• Identify the location and dimensions for the pipe rack section

• Consider the load requirements and support structures

• Design the pipe rack section using appropriate materials and connections

• Ensure proper spacing and alignment for pipes in both directions
Answered by AI
Add your answer
Q6. Make equipment foundation, Pump Foundation
Add your answer

Q1. Do you have experience with basements and below ground structures
Ans. 
Yes, I have extensive experience with basements and below ground structures.
• I have designed and analyzed numerous basements for residential and commercial buildings.

• I am familiar with waterproofing techniques and soil mechanics related to below ground structures.

• I have experience with retaining walls, foundations, and underground parking structures.

• I have worked on projects involving deep excavations and shoring system...read more
Answered by AI
Add your answer

Q1. Design of one way slab
Ans. 
One way slab is a type of reinforced concrete slab where the main reinforcement is provided in only one direction.
• Main reinforcement is provided in the shorter span direction

• Distribution bars are provided in the longer span direction

• Commonly used in buildings with rectangular floor plans
Answered by AI
Add your answer
Q2. Difference between short column and long column
Ans. 
Short columns fail due to crushing of material, while long columns fail due to buckling.
• Short columns have a slenderness ratio less than a certain critical value, while long columns have a slenderness ratio greater than that value.

• Short columns are more likely to fail in compression, while long columns are more likely to fail in buckling.

• Examples of short columns include columns in buildings, while examples of long col
Answered by AI
Add your answer
Q3. Design of two way slab
Ans. 
Two way slab is a type of reinforced concrete slab that is supported by beams in both directions.
• Two way slab is designed to carry loads in both directions, typically used in buildings with square or rectangular floor plans.

• The design of two way slab involves determining the thickness, reinforcement layout, and spacing of bars to ensure structural integrity.

• The slab is supported by beams on all four sides, allowing for...read more
Answered by AI
Add your answer
Q4. Design of staircase
Ans. 
Designing a staircase involves considering factors such as building codes, safety regulations, space constraints, and aesthetic appeal.
• Consider the height and width of each step to ensure comfortable and safe use.

• Calculate the rise and run of the staircase to determine the number of steps needed.

• Choose a suitable material for the staircase based on the design requirements and budget.

• Ensure proper handrails and guardrai...read more
Answered by AI
Add your answer
Q5. Wind load calculations
Add your answer

Q1. What is copy monitor in Autodesk Revit?
Ans. 
Copy monitor in Autodesk Revit is a tool used to monitor changes in linked models and synchronize them with the current model.
• Copy monitor allows users to track changes in linked models and update them in the current model.

• It helps maintain consistency between different models in a project.

• Users can easily identify and resolve conflicts or discrepancies between linked models.

• Copy monitor can be used for elements like g
Answered by AI
Add your answer
Q2. What is shared parameter?
Ans. 
Shared parameter is a parameter that can be used across multiple elements in a project.
• Shared parameters allow for consistent data across different elements in a project.

• They can be created and managed in software like Revit for BIM projects.

• Examples include shared parameters for material types, cost estimates, or project phases.
Answered by AI
Add your answer
Q3. What is the difference between import cad & link cad?
Ans. 
Import CAD brings a copy of the CAD file into the current project, while Link CAD creates a reference to the original CAD file.
• Import CAD creates a duplicate of the CAD file within the project, increasing file size.

• Link CAD maintains a connection to the original CAD file, allowing for real-time updates.

• Changes made to the original CAD file will reflect in the linked CAD file, but not in the imported CAD file.

• Import CAD...read more
Answered by AI
Add your answer
Q4. What is Building Information Modelling?
Ans. 
Building Information Modelling (BIM) is a digital representation of the physical and functional characteristics of a building.
• BIM is a collaborative process that allows multiple stakeholders to work together on a building project.

• It involves creating and managing digital representations of the physical and functional characteristics of a building.

• BIM helps in improving coordination, efficiency, and accuracy in the desi...read more
Answered by AI
Add your answer

Q1. General question about me.
Add your answer

Q1. Bending moment & Shear force diagram, lateral pressure from soil & water, reinforcement provision, Tension & compression in retaining walls etc.
Add your answer

Aptitude+ Technical MCQ test

Q1. BMD and SFD diagram of continuous beam and portal frames.
Ans. 
BMD and SFD diagrams show internal forces in a structure, like bending moment and shear force.
• BMD diagram displays variation of bending moment along the length of a beam or frame.

• SFD diagram shows variation of shear force along the length of a beam or frame.

• In continuous beams, BMD and SFD diagrams help in analyzing internal forces at different supports and sections.

• Portal frames have different loading conditions which...read more
Answered by AI
Add your answer
Q2. Basics of geotechnical engineering
Add your answer
Q3. Basics of Steel Structure
Add your answer
Q4. Plastic method of design
Ans. 
Plastic method of design is a structural engineering approach that considers the redistribution of internal forces to achieve a more efficient design.
• Plastic method allows for redistribution of internal forces beyond the elastic limit of the material.

• It is based on the concept of plastic hinges forming in the structure to dissipate energy.

• Design is based on achieving a collapse mechanism that is ductile and predictable...read more
Answered by AI
Add your answer
Q5. Basics of IS456 RCC
Add your answer

Q1. Tell me about About yourself
Add your answer
Q2. About Salary details
Add your answer