Nesma & Partners Senior Civil Engineer Interview Questions and Answers

Bar bending schedule is a document that provides details of reinforcement steel bars used in construction projects.

• It includes details such as bar mark, bar size, quantity, shape, and bending dimensions.

• Helps in estimating the quantity of steel required for construction.

• Ensures proper placement and bending of reinforcement bars as per design specifications.

• Used by contractors, engineers, and construction workers for re...read more

28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing.

• 28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing

• It is important for assessing the quality of concrete and its ability to support structural loads

• The strength of concrete typically continues to increase beyond 28 days, but 28 days is the standard testing

Mivan is a modern construction technique using aluminum formwork, while conventional construction involves traditional methods like brick and mortar.

• Mivan is faster and more efficient than conventional construction methods.

• Mivan requires skilled labor for installation of aluminum formwork.

• Conventional construction is more labor-intensive and time-consuming.

• Mivan provides better quality finishes compared to conventional...read more

Self leveling concrete is a type of concrete that has a high flow consistency and is used to create smooth and level surfaces.

• Self leveling concrete is designed to flow easily and settle into place without the need for troweling or leveling.

• It is commonly used to level uneven floors before installing flooring materials such as tile or carpet.

• Self leveling concrete can be applied in thicknesses ranging from a featheredg...read more

The 1st Aluform mockup concreting typically takes 1-2 days to complete.

• 1-2 days is the usual timeframe for 1st Aluform mockup concreting

• Factors such as weather conditions, size of the mockup, and availability of resources can affect the duration

• Proper planning and coordination can help expedite the process

Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.

• To prepare for further construction on top of the piles

• To ensure proper load transfer to the foundation

• To facilitate the installation of pile caps or beams

• To adjust the pile length if necessary

There are four deductions of 90 degree angles.

• A 90 degree angle is formed when two lines intersect at a right angle.

• In a square, all four angles are 90 degrees.

• In a rectangle, opposite angles are 90 degrees.

• In a right triangle, one angle is always 90 degrees.

Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.

• Static load test involves applying a constant load to a structure and measuring its response over time.

• Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.

• Static load test helps determine the maxi...read more

The number of tolerance of pile load test depends on the specific project requirements and standards.

• The number of tolerance of pile load test can vary based on the project specifications and standards.

• Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.

• Some projects may have more stringent tolerance requirements depending on the criticality of the structure.

• It is important to refer...read more

Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.

• Range density of bentonite is typically between 17-22 lb/gal.

• Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.

• The range density of bentonite is important for determining its effectiveness in different applications.

• Higher range density ...read more

I am unable to provide my previous salary as it is confidential. However, I am expecting a competitive salary based on my qualifications and experience.

• My previous salary is confidential and I am unable to disclose it.

• I am expecting a salary that is commensurate with my qualifications and experience.

• I am open to discussing salary expectations during the negotiation process.

• I believe that a competitive salary is importa...read more