AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Megha Engineering & Infrastructures Civil GET Interview Questions, Process, and Tips
Megha Engineering & Infrastructures Civil GET Interview Experiences
1 interview found
Abdul Syed
Interview Questionnaire
4 Questions
- Q1. How tunnel lining is done?
- Ans.
Tunnel lining is the process of constructing a protective layer inside a tunnel to provide stability and prevent water ingress.
Tunnel lining can be done using various methods such as shotcrete, precast concrete segments, and cast-in-place concrete.
Shotcrete involves spraying a mixture of cement, sand, and water onto the tunnel walls using a high-pressure hose.
Precast concrete segments are manufactured off-site and then...
- Q2. How gantry lining works?
- Ans.
Gantry lining is a construction technique used to reinforce and stabilize tunnels or underground structures.
Gantry lining involves the installation of precast concrete segments or steel plates along the tunnel walls.
These segments or plates are carefully positioned and secured to form a continuous lining.
The lining provides structural support, prevents soil or water ingress, and enhances the overall stability of the tu...
- Q3. What is the use of vibrators in gantry?
- Ans.
Vibrators are used in gantries for compacting concrete and ensuring its strength and durability.
Vibrators are used to remove air bubbles and excess water from freshly poured concrete.
They help in achieving proper compaction and density of the concrete.
Vibrators are commonly used in the construction of bridges, dams, and other large structures.
They can be handheld or attached to the gantry for larger-scale operations.
Ex...
- Q4. Density of concrete?
- Ans.
The density of concrete is a measure of its mass per unit volume.
Density of concrete typically ranges from 2200 to 2500 kg/m³.
The density can vary depending on the composition and aggregates used.
Lightweight concrete has lower density, around 1600 to 2000 kg/m³.
High-density concrete, used for radiation shielding, can have density up to 6000 kg/m³.
Interview Preparation Tips
Experience: They asked civil engineering related questions
Tips: Prepare civil basic knowledge only for this test
Duration: 30 minutes
Total Questions: 34
Round: Resume Shortlist
Experience: They shortlisted the resumes according to test marks .
Tips: If u have good grades in high school & college then no matter for worry for u
Round: HR Interview
Tips: Just be confident
Round: Resume Shortlist
Experience: They shortlisted the resume & said that they will call me
College Name: Priyatam institute of technology & management
Top trending discussions
Interview questions from similar companies
(1 Question)
- Q1. What is your fav subjet
- Ans.
My favorite subject is mathematics because I enjoy solving complex problems and using logic to find solutions.
I love working with numbers and equations
I find joy in solving challenging math problems
I appreciate the logical reasoning involved in mathematics
Senior Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 10 Sep 2017
I appeared for an interview before Sep 2016.
Interview Questionnaire
1 Question
- Q1. Ocampo, basic electronics and C
Interview Preparation Tips
Duration: 1 hour
Total Questions: 50
Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering
Senior Engineer Interview Questions & Answers
Larsen & Toubro Limited
Shveta Gupta
posted on 10 Sep 2015
I applied via PLACEMENT
Interview Preparation Tips
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course
General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)
Senior Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 12 May 2018
Interview Questionnaire
5 Questions
- Q1. Pertaining to the mentioned roles and responsibilities in your resume
- Q2. Planning and work order creation
- Q3. Piling activities
- Q4. Introduction
- Q5. Cross checking of documents
Interview Preparation Tips
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.
Senior Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 1 Jun 2021
I applied via Walk-in and was interviewed in Feb 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Salary discussion and some professional questions.
- Q2. Technical realated your stream
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 3 interview rounds.
(2 Questions)
- Q1. What is your name
- Q2. Explain your self
(3 Questions)
- Q1. Explain your self
- Q2. Are you know about wood governing
- Ans.
Wood governing refers to the regulations and standards that govern the use of wood in construction and engineering projects.
Wood governing includes codes, standards, and regulations related to the design, construction, and maintenance of wooden structures.
Knowledge of wood governing is important for ensuring compliance with safety and quality standards in engineering projects.
Examples of wood governing organizations in...
- Q3. How maintain furnace draft
- Ans.
Maintaining furnace draft involves controlling air flow to ensure proper combustion and heat transfer.
Regularly clean and inspect the furnace and chimney to prevent blockages
Adjust the damper to control the amount of air entering the furnace
Use a draft gauge to monitor and adjust draft pressure
Install a barometric damper to automatically regulate draft pressure
Consider installing a draft inducer to improve draft in low
(2 Questions)
- Q1. Why leave your previous company
- Q2. What's your expectation salary
Interview Preparation Tips
(2 Questions)
- Q1. Whate are different bus bar schemes?
- Ans.
Bus bar schemes are different ways of connecting bus bars in power systems.
Single bus bar scheme
Double bus bar scheme
Main and transfer bus bar scheme
Ring bus bar scheme
Breaker and a half scheme
Mesh bus bar scheme
- Q2. What are the equipment sequence for any line bay?
- Ans.
The equipment sequence for any line bay starts with the circuit breaker and ends with the transformer.
The circuit breaker is the first equipment in the sequence.
Next comes the isolator switch.
After that, the earth switch is operated.
Then the line disconnector is opened.
Finally, the transformer is disconnected from the line.
The sequence is reversed when the line bay is put back into service.
(2 Questions)
- Q1. What you want to leave your current organization?
- Q2. Are you comfortable to relocate to another city?
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed before Jan 2022. There were 3 interview rounds.
(1 Question)
- Q1. About your self. About casting yard. About Methodology of casting of different structures. About site progress planning and time cycle of progress. This process is for 30-40 minutes.
(1 Question)
- Q1. Details of my Education and experience. Salary negotiation and finalization of joining.
Interview Preparation Tips
- Civil Construction
- IS Code
- Your expertise area
Senior Engineer Interview Questions & Answers
Shapoorji Pallonji Group
Anonymous
posted on 31 Jan 2022
I applied via Naukri.com and was interviewed in Sep 2021. There were 4 interview rounds.
Technical and Aptitude Questions
(2 Questions)
- Q1. Work done in Previous organisation
- Q2. Quality Assurance and Control Process
(1 Question)
- Q1. What are your salary expectations?
Interview Preparation Tips
Megha Engineering & Infrastructures Interview FAQs
Tell us how to improve this page.
Megha Engineering & Infrastructures Interviews By Designations
- Megha Engineering & Infrastructures Senior Engineer Interview Questions
- Megha Engineering & Infrastructures Civil Site Engineer Interview Questions
- Megha Engineering & Infrastructures Civil Engineer Interview Questions
- Megha Engineering & Infrastructures QA QC Engineer Interview Questions
- Megha Engineering & Infrastructures Store Executive Interview Questions
- Megha Engineering & Infrastructures Graduate Engineer Trainee (Get) Interview Questions
- Megha Engineering & Infrastructures Senior Civil Engineer Interview Questions
- Megha Engineering & Infrastructures Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Civil Site Engineer Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Project Engineer - Civil Interview Questions
- Assistant Engineer - Civil Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
|
Senior Engineer
908
salaries
|  ₹3.5 L/yr - ₹11.5 L/yr |
|
Engineer
897
salaries
| ₹2.2 L/yr - ₹7 L/yr |
|
Associate Manager
510
salaries
| ₹5 L/yr - ₹15.8 L/yr |
|
Mechanical Engineer
392
salaries
| ₹2 L/yr - ₹9 L/yr |
|
Civil Engineer
336
salaries
| ₹2.2 L/yr - ₹7.5 L/yr |
Larsen & Toubro Limited
Shapoorji Pallonji Group
Alstom Transportation
Tata Technologies
- Home >
- Interviews >
- Megha Engineering & Infrastructures Interview Questions >
- Megha Engineering & Infrastructures Civil GET Interview Questions
