i
Maruti Suzuki
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Clear (1)
I applied via Approached by Company and was interviewed before Apr 2021. There was 1 interview round.
The engine starting process involves several steps to ignite the fuel and air mixture in the engine cylinders.
The ignition key is turned to the 'on' position, which activates the fuel pump and other electrical components.
The starter motor engages the flywheel, which turns the engine over.
Fuel is injected into the cylinders and mixed with air.
The spark plugs ignite the fuel and air mixture, causing combustion and starti...
Top trending discussions
I was interviewed in Nov 2016.
The carcass in tyres provides structural integrity and supports the weight of the vehicle.
The carcass is the framework of the tyre that holds the rubber components together.
It is typically made of layers of fabric or steel cords embedded in rubber.
The carcass provides strength and stability to the tyre, allowing it to withstand the forces and pressures encountered during driving.
It also helps in distributing the weight...
I applied via Campus Placement and was interviewed before Jan 2019. There was 1 interview round.
The question is asking for the candidate's name and address.
Provide your full name and complete address.
Include your street name, city, state, and zip code.
Ensure the address is accurate and up to date.
I applied via Campus Placement
I applied via Walk-in and was interviewed before Nov 2020. There was 1 interview round.
A circuit breaker is an electrical switch that automatically interrupts the flow of current when it exceeds a certain limit.
It is used to protect electrical circuits from damage caused by overloading or short circuits.
It works by detecting the excess current and tripping the switch to break the circuit.
It can be reset manually or automatically depending on the type of circuit breaker.
Examples include thermal circuit br...
A contactor is an electrical switch used for switching an electrical circuit on or off.
It is used to control electric motors, lighting, heating, and other electrical loads.
It consists of a coil, contacts, and an enclosure.
The coil generates a magnetic field that pulls the contacts together to close the circuit.
Examples include HVAC systems, elevators, and industrial machinery.
Contactor ratings are based on the amount o...
MCB stands for Miniature Circuit Breaker. It is an electrical switch that automatically shuts off the electrical circuit during an overload or short circuit.
MCB is a type of circuit breaker that is commonly used in residential and commercial buildings.
It is designed to protect electrical circuits from damage caused by overloading or short circuits.
MCBs are available in different current ratings and can be easily replac...
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors are used in various applications such as electric vehicles, industrial machinery, and household appliances.
There are different types of motors such as DC motors, AC motors, stepper motors, and servo motors.
The basic principle of a motor is the interaction between a magnetic field and an electric current.
Examples of motor...
A current transformer is a device that measures the current flowing in a circuit by producing a proportional current in its secondary winding.
Consists of a primary winding and a secondary winding
Primary winding is connected in series with the circuit carrying the current to be measured
Secondary winding is connected to a measuring instrument or protective relay
Produces a current in the secondary winding that is proporti...
I applied via Campus Placement and was interviewed in Nov 2020. There were 3 interview rounds.
posted on 2 Sep 2017
A diesel generator works by converting diesel fuel into mechanical energy which is then converted into electrical energy.
Diesel fuel is injected into the combustion chamber where it ignites and creates high pressure gases that push the piston down, creating mechanical energy.
The mechanical energy is then converted into electrical energy through the use of an alternator.
The alternator uses a magnetic field and a conduct...
A diesel engine works by compressing air in the cylinder, which heats up and ignites the fuel injected into the cylinder.
Air is drawn into the cylinder and compressed by the piston
The compressed air heats up and ignites the fuel injected into the cylinder
The explosion pushes the piston down, which turns the crankshaft and powers the engine
Diesel engines are more efficient than gasoline engines because they compress the...
A train doesn't need a differential because its wheels are fixed to the same axle and rotate at the same speed.
Train wheels are fixed to the same axle
Wheels rotate at the same speed
Differential is used in vehicles with wheels that rotate at different speeds
Differential allows for smooth turning
Petrol engines have lower compression ratios compared to diesel engines.
Petrol engines have lower compression ratios to prevent knocking or detonation.
Diesel engines have higher compression ratios to ignite the fuel without spark plugs.
Higher compression ratios in diesel engines result in better fuel efficiency and torque.
Petrol engines require lower compression ratios to accommodate the lower octane rating of petrol f...
posted on 15 Jul 2017
I was interviewed before Jul 2016.
I applied via Walk-in and was interviewed in Aug 2020. There was 1 interview round.
based on 1 interview
Interview experience
based on 19 reviews
Rating in categories
Deputy Manager
2.1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
1.9k
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
1.9k
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
432
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
374
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Motors
Mahindra & Mahindra
Hero MotoCorp
Bajaj Auto