Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Atlas Copco Team. If you also belong to the team, you can get access from here

Atlas Copco Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Atlas Copco Service Engineer Interview Questions, Process, and Tips

Updated 28 Nov 2023

Top Atlas Copco Service Engineer Interview Questions and Answers

  • Q1. What is the basic hydraulic system? What are the function of various valves? What are the function of various Pumps? Hydraulic schematics? What is the Engine? What are th ...read more
  • Q2. compare conductor insulator semiconductor
  • Q3. what id diode ?

Atlas Copco Service Engineer Interview Experiences

4 interviews found

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in May 2023. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

It is along with technical written

Round 3 - Group Discussion 

A topic they will given to us and we should talk it about 1 min

Round 4 - Psychometric Test 

(1 Question)

  • Q1. There two students sit each other back to back. One diagram will given one have to describe and another one have to draw hearing the describe & vice versa
Round 5 - Technical 

(3 Questions)

  • Q1. What id diode ?
  • Ans. 

    A diode is an electronic component that allows current to flow in one direction and blocks it in the opposite direction.

    • Diodes are made of semiconductor materials, such as silicon or germanium.

    • They have two terminals: an anode (positive terminal) and a cathode (negative terminal).

    • When a diode is forward-biased, it allows current to flow through it.

    • When a diode is reverse-biased, it blocks the current.

    • Diodes are commonl...

  • Answered by AI
  • Q2. Draw the diagram of diode
  • Ans. 

    A diode is a two-terminal electronic component that allows current to flow in one direction and blocks it in the opposite direction.

    • A diode has an anode and a cathode terminal.

    • It is represented by a triangle with a line at the base.

    • The arrowhead of the triangle points towards the cathode terminal.

    • The line at the base represents the anode terminal.

    • The symbol of a diode is often accompanied by its part number or label.

  • Answered by AI
  • Q3. Compare conductor insulator semiconductor
  • Ans. 

    Conductor, insulator, and semiconductor are materials with different electrical conductivity properties.

    • Conductor: Materials that allow the flow of electric current easily. Examples: copper, aluminum.

    • Insulator: Materials that do not allow the flow of electric current. Examples: rubber, glass.

    • Semiconductor: Materials with intermediate conductivity. Examples: silicon, germanium.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study the basic things respect to your department
Round 1 - Aptitude Test 

Basic

Round 2 - Group Discussion 

Current hot topics

Round 3 - Technical 

(1 Question)

  • Q1. Technical questions related to your stream

Interview Preparation Tips

Interview preparation tips for other job seekers - Be transparent "Don't try to show off ..

Service Engineer Interview Questions Asked at Other Companies

asked in Tata AIG
Q1. What are the compulsory policy excess in four wheeler private veh ... read more
asked in Voltas
Q2. How much sallery you want? And you know about the term and condit ... read more
asked in Atlas Copco
Q3. What is the basic hydraulic system? What are the function of vari ... read more
asked in FANUC
Q4. •        Coordinate with other ... read more
Q5. If we want to increase engine torque, how?

I applied via Campus Placement and was interviewed before Jan 2021. There were 6 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Description of boomer
  • Ans. 

    Boomer is a hydraulic drilling rig used in mining and construction industries.

    • Boomer is a versatile drilling rig that can be used for drilling holes of different sizes and depths.

    • It is equipped with a hydraulic system that powers the drilling mechanism.

    • Boomer is commonly used in mining and construction industries for drilling tunnels, shafts, and blast holes.

    • It can be operated by a single person or a team of operators ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just relux nd stay calm revise ur basic

I applied via Recruitment Consultant and was interviewed before Oct 2017. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is the basic hydraulic system? What are the function of various valves? What are the function of various Pumps? Hydraulic schematics? What is the Engine? What are the four strokes of an engine? Explai...
  • Ans. 

    The basic hydraulic system consists of various valves and pumps that work together to control fluid flow and pressure.

    • Valves in a hydraulic system control the direction, flow rate, and pressure of the fluid.

    • Examples of valves include check valves, relief valves, and control valves.

    • Pumps in a hydraulic system generate the flow and pressure of the fluid.

    • Examples of pumps include gear pumps, vane pumps, and piston pumps.

    • H...

  • Answered by AI

Interview Preparation Tips

General Tips: NA
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: <1 week

Atlas Copco interview questions for designations

 Field Service Engineer

 (1)

 Senior Electrical Service Engineer

 (1)

 Service Planner

 (2)

 Quality Engineer

 (1)

 Manufacturing Engineer

 (1)

 Senior Service Specialist

 (1)

 Junior Mechanical Engineer

 (1)

 Diploma Trainee Engineer

 (1)

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Jul 2017. There were 5 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. About previous company eqipment and hydrolic related quetion like circuit , symbol
  • Q2. What type of your eqipment like electricelly base or hyd base
  • Ans. 

    Our equipment includes both electrically and hydraulically based systems.

    • We have a range of electrically powered equipment such as motors, pumps, and control panels.

    • We also have hydraulically based systems including hydraulic pumps, cylinders, and valves.

    • Our service engineers are trained to work with both types of equipment and are proficient in troubleshooting and maintenance.

    • For example, we have electrically powered ...

  • Answered by AI
  • Q3. Decuse about sellery

Interview Preparation Tips

Round: Test
Experience: Techanical

General Tips: firest impration is your personalty then depend on your techanical knowlege
Skills: Communication, Problem Solving
Duration: 1-4 weeks
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

Interview Questionnaire 

1 Question

  • Q1. EHS related questions and HIRA related questions ask. And incident management and investigation related questions ask.

Interview Questionnaire 

5 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a Service Engineer with expertise in troubleshooting and repairing complex machinery.

    • Experienced in diagnosing and resolving technical issues in industrial equipment

    • Proficient in using diagnostic tools and software to identify problems

    • Skilled in performing maintenance and repairs on various types of machinery

    • Strong problem-solving and communication skills

    • Ability to work independently and under pressure

    • Example: Suc...

  • Answered by AI
  • Q2. Why hydraulics Ram has different speed in head side and rod Side?
  • Ans. 

    The speed difference in a hydraulic ram is due to the difference in effective areas on the head side and rod side.

    • The head side of the ram has a larger effective area, resulting in slower speed.

    • The rod side of the ram has a smaller effective area, resulting in faster speed.

    • This speed difference is a result of the hydraulic pressure acting on different areas.

    • The speed ratio between the head side and rod side can be calc...

  • Answered by AI
  • Q3. What is the purpose of pressure relief valve?
  • Ans. 

    A pressure relief valve is used to protect equipment and systems from excessive pressure by releasing the pressure when it exceeds a certain limit.

    • Prevents damage to equipment and systems

    • Ensures safety of personnel

    • Maintains system integrity

    • Prevents explosions or ruptures

    • Relieves excess pressure by opening and releasing fluid or gas

    • Commonly used in boilers, pressure vessels, pipelines, and hydraulic systems

  • Answered by AI
  • Q4. What is orifice?
  • Ans. 

    An orifice is a small opening or hole through which fluid or gas can flow.

    • Orifices are commonly used in various industries, such as plumbing, engineering, and manufacturing.

    • They are often used to control the flow rate of fluids or gases.

    • Orifices can be found in devices like nozzles, valves, and flow meters.

    • The size of an orifice determines the flow rate and pressure drop across it.

    • Examples of orifices include the tiny ...

  • Answered by AI
  • Q5. Why you looking for a job change?
  • Ans. 

    I am looking for a job change to explore new opportunities and challenges.

    • Seeking career growth and advancement

    • Wanting to work in a different industry or with different technologies

    • Desire for a better work-life balance

    • Relocation or proximity to family

    • Unsatisfactory current job situation

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just give your introduction very simple short and sweet it's not to be so lengthy.
And the technical round is very simple as always. It consists of mainly Basics.
So don't worry...!!

Best of Luck...!!

I applied via Naukri.com

Interview Questionnaire 

2 Questions

  • Q1. Basics hydraulics, Basic electricals, Hydraulic Schematic. Basics in engine.
  • Q2. Every question was on basics things.

Interview Preparation Tips

Interview preparation tips for other job seekers - They are looking for strong basics from hydraulic and electrics. Also communication skills need to be good as well you have to handle customer lik

I applied via Naukri.com and was interviewed before May 2018. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Explain about open loop & close loop operation in hydraulic system.
  • Ans. 

    Open loop and closed loop are two modes of operation in hydraulic systems.

    • Open loop operation: The hydraulic system operates without feedback control. The output is not adjusted based on the system's performance.

    • Closed loop operation: The hydraulic system uses feedback control to adjust the output based on the system's performance.

    • Open loop systems are simpler and less expensive, but they lack precision and accuracy.

    • Cl...

  • Answered by AI
  • Q2. Explain about Starting circuit.
  • Ans. 

    The starting circuit is responsible for initiating the engine's operation.

    • The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.

    • When the ignition switch is turned on, it sends a signal to the solenoid, which then engages the starter motor.

    • The starter motor uses electrical energy from the battery to turn the engine's crankshaft, starting the combustion process.

    • Once...

  • Answered by AI
  • Q3. Why should we hire you ?
  • Ans. 

    I am a highly skilled and experienced service engineer with a proven track record of successfully troubleshooting and resolving complex technical issues.

    • I have a strong technical background and extensive experience in diagnosing and repairing equipment.

    • I am a quick learner and can adapt to new technologies and processes easily.

    • I have excellent communication skills and can effectively communicate with customers and team...

  • Answered by AI
  • Q4. What is your core values ?
  • Ans. 

    My core values include integrity, accountability, and continuous learning.

    • Integrity: I believe in always doing the right thing, even when no one is watching.

    • Accountability: I take ownership of my actions and responsibilities.

    • Continuous learning: I strive to constantly improve my skills and knowledge.

    • Example: I once discovered a mistake in a project I was working on, and instead of ignoring it, I took responsibility and...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Questions based upon technical knowledge like engine, basic electrical & basic hydraulics.

General Tips: You should have deep knowledge about hydraulics system & DC electrics.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-3 Months

I applied via Recruitment Consultant and was interviewed in Nov 2020. There were 6 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Jgtwhnhwgw

Interview Preparation Tips

Interview preparation tips for other job seekers - Sound knowledge of hydraulics and electrical,diagrams theory as well as practical
Contribute & help others!
anonymous
You can choose to be anonymous

Atlas Copco Interview FAQs

How many rounds are there in Atlas Copco Service Engineer interview?
Atlas Copco interview process usually has 4 rounds. The most common rounds in the Atlas Copco interview process are Aptitude Test, Group Discussion and Technical.
How to prepare for Atlas Copco Service Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Atlas Copco. The most common topics and skills that interviewers at Atlas Copco expect are Spare Parts, Renewable Energy, Customer Satisfaction, Technical Support and IMS.
What are the top questions asked in Atlas Copco Service Engineer interview?

Some of the top questions asked at the Atlas Copco Service Engineer interview -

  1. What is the basic hydraulic system? What are the function of various valves? Wh...read more
  2. compare conductor insulator semiconduc...read more
  3. what id diod...read more

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

DESIGNATION

JOBS

Eurofins Scientific

No Jobs

SALARIES

Timken

JOBS

Arbelos Solutions

No Jobs

JOBS

Steelman Telecom

No Jobs

Tell us how to improve this page.

Atlas Copco Service Engineer Interview Process

based on 3 interviews

Interview experience

4
  
Good
View more
Atlas Copco Service Engineer Salary
based on 231 salaries
₹1.8 L/yr - ₹10 L/yr
22% more than the average Service Engineer Salary in India
View more details

Atlas Copco Service Engineer Reviews and Ratings

based on 79 reviews

4.6/5

Rating in categories

4.5

Skill development

4.1

Work-life balance

4.0

Salary

4.3

Job security

4.4

Company culture

3.5

Promotions

4.2

Work satisfaction

Explore 79 Reviews and Ratings
Design Engineer
291 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Service Engineer
231 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Engineer
169 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
168 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Service Engineer
97 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Atlas Copco with

Ingersoll Rand

4.0
Compare

Sandvik Asia

4.3
Compare

Caterpillar Inc

4.3
Compare

Epiroc

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview