AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Larsen & Toubro Limited
Compare
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Larsen & Toubro Limited Foreman Interview Questions and Answers
Larsen & Toubro Limited Foreman Interview Experiences
1 interview found
I applied via Walk-in and was interviewed in Jul 2023. There were 3 interview rounds.
(1 Question)
- Q1. Shuttering releted
(6 Questions)
- Q1. Shuttering for foundation & slab
- Ans.
Shuttering is a temporary structure used to support concrete while it sets for foundation & slab construction.
Shuttering is also known as formwork and is typically made of wood, steel, or plastic.
It is essential for creating the desired shape and structure of the foundation and slab.
Properly installed shuttering ensures the concrete is poured and cured correctly.
Examples of shuttering materials include plywood, timber
- Q2. Wooden shuttering
- Q3. Column shuttering & suporting
- Q4. Supervision & technically guide
- Q5. One day target completion
- Ans.
The one day target completion refers to completing a specific task within a 24-hour period.
Set clear and achievable goals for the day
Prioritize tasks based on urgency and importance
Delegate tasks if necessary to meet the deadline
Monitor progress throughout the day and make adjustments as needed
- Q6. Site management
Interview questions from similar companies
Engineer Interview Questions & Answers
Kalpataru Projects International
Abhay Jain
posted on 8 Jul 2017
I appeared for an interview before Jul 2016.
Interview Questionnaire
2 Questions
- Q1. Non technical as a math Gk and about me
- Q2. Introduction
Interview Preparation Tips
Experience: My test scores is totall 57 number
Total Questions: 70
Round: HR Interview
Experience: My test scores is totall 57 number
Tips: At this must required your Confident
Interview Questionnaire
1 Question
- Q1. Questions were from bending moment and shear force diagrams;
Interview Preparation Tips
Experience: Technical (Structural engineering questions only) and aptitude test
Round: Technical Interview
Tips: Questions on Earthquake engineering, structural dynamics,Design of RC and steel structures can also be asked.
Round: HR Interview
Experience: HR interview is trivial if you are selected through technical interview.
General Tips: Technical/aptitude test and technical interview had maximum weightage. If you crack it the best way, you are in!
Skill Tips: CGPA does not help much. Internship, project etc. questions were not asked.
Skills: Aptitude skills, Technical skills, Designing skills
College Name: IIT MADRAS
I applied via Walk-in and was interviewed before Nov 2019. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Tower cranes erection,batching plant maintenance and electrical safety
- Q2. Ok normal
Interview Preparation Tips
Engineer Interview Questions & Answers
Kalpataru Projects International
Anonymous
posted on 19 Jun 2021
I applied via LinkedIn and was interviewed before Jun 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Technical
Interview Preparation Tips
Engineer Interview Questions & Answers
Megha Engineering & Infrastructures
Anonymous
posted on 3 Feb 2022
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
(4 Questions)
- Q1. What are the common welding process?
- Ans.
Common welding processes include MIG, TIG, Stick, and Flux-Cored welding.
MIG (Metal Inert Gas) welding uses a wire electrode and shielding gas to join metal.
TIG (Tungsten Inert Gas) welding uses a tungsten electrode and filler metal to join metal.
Stick welding uses a consumable electrode coated in flux to join metal.
Flux-Cored welding uses a wire electrode with a flux core to join metal.
Other common welding processes i...
- Q2. What are the tests conducted on welding joints?
- Ans.
Tests conducted on welding joints
Visual inspection
Dye penetrant testing
Radiographic testing
Ultrasonic testing
Magnetic particle testing
Tensile testing
Bend testing
- Q3. What is submerged arc welding process?
- Ans.
Submerged arc welding is a process where an arc is maintained between a consumable electrode and the workpiece under a blanket of granular flux.
The process is used for welding thick sections of steel.
The granular flux shields the weld from atmospheric contamination.
The consumable electrode is continuously fed into the weld pool.
The process is commonly used in shipbuilding, pipeline construction, and pressure vessel fab
- Q4. Procedure of rectification for defected welding joints?
- Ans.
Defected welding joints can be rectified through a process of cutting, grinding, and rewelding.
Identify the type and extent of the defect
Cut out the defected portion of the joint
Grind the edges of the remaining joint to prepare for rewelding
Reweld the joint using appropriate welding techniques and materials
Perform non-destructive testing to ensure the quality of the repaired joint
Interview Preparation Tips
Engineer Interview Questions & Answers
Megha Engineering & Infrastructures
Anonymous
posted on 16 Aug 2020
I applied via Walk-in and was interviewed before Aug 2019. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Tell daily maintenance schedules of machineries
- Ans.
Daily maintenance schedules of machineries
Check oil levels and top up if necessary
Inspect and clean filters
Check for any signs of wear and tear
Lubricate moving parts
Check for any leaks or unusual noises
Perform any necessary repairs or replacements
Keep a record of maintenance performed
- Q2. Tell how many types of oils uses in construction machinery
- Ans.
Construction machinery uses various types of oils depending on their functions.
There are different types of oils used in construction machinery such as engine oil, hydraulic oil, gear oil, transmission oil, and brake oil.
Engine oil is used to lubricate the engine and prevent wear and tear.
Hydraulic oil is used to transfer power in hydraulic systems.
Gear oil is used to lubricate gears and bearings in gearboxes.
Transmiss...
- Q3. How to repair hydraulic pump?
- Ans.
To repair a hydraulic pump, first identify the problem and then disassemble the pump to replace or repair the faulty parts.
Identify the problem by checking for leaks, unusual noises, or loss of pressure.
Disassemble the pump carefully, taking note of the order of parts and any seals or gaskets.
Inspect the parts for damage or wear, and replace any faulty components.
Reassemble the pump, making sure all parts are properly ...
- Q4. What is the reason of engine failure ?
- Ans.
Engine failure can be caused by various factors such as overheating, lack of maintenance, wear and tear, and manufacturing defects.
Overheating due to lack of coolant or oil
Lack of maintenance such as not changing oil or air filters
Wear and tear of engine components such as pistons, bearings, and valves
Manufacturing defects such as faulty parts or poor assembly
Fuel contamination or incorrect fuel usage
Improper installat...
Interview Preparation Tips
After the shortlisting of CVs, list was sent for those who were eligible for the OT. The online test included aptitude + technical. There were pretty easy to moderate questions but time was less.
(1 Question)
- Q1. It was the technical round interview. Ours was online. It went up to 50 mins.
(1 Question)
- Q1. The portal will be open for 1 hr and within that time some questions are to be answered by making a video and uploading it.
(1 Question)
- Q1. Questions related to HR
(1 Question)
- Q1. Selected candidates would be asked to visit the mentioned hospital for this round.
I applied via Company Website and was interviewed in Jan 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. How is lapping of beam done.
- Ans.
Lapping of beam is done by grinding the surface of the beam to achieve a smooth and flat finish.
The beam is placed on a lapping machine with an abrasive surface.
The machine moves the beam back and forth while the abrasive surface grinds away any imperfections.
The process is repeated with finer and finer abrasives until the desired finish is achieved.
Lapping can improve the strength and durability of the beam.
It is comm...
- Q2. How much cube samples are taken for 60 cum of concrete.
- Ans.
The number of cube samples taken for 60 cum of concrete depends on the specifications and requirements of the project.
The number of cube samples may vary depending on the project specifications and requirements.
Typically, 3 to 5 cube samples are taken for every 100 cubic meters of concrete.
The cube samples are taken to test the compressive strength of the concrete.
The number of cube samples may also depend on the locat...
Interview Preparation Tips
sumit tyagi
Selected
I applied via Naukri.com and was interviewed before Mar 2023. There were 2 interview rounds.
(1 Question)
- Q1. Personal family background
(1 Question)
- Q1. Technical questions regarding machine maintenance
Larsen & Toubro Limited Interview FAQs
Tell us how to improve this page.
Larsen & Toubro Limited Interviews By Designations
- Larsen & Toubro Limited Graduate Engineer Trainee (Get) Interview Questions
- Larsen & Toubro Limited Assistant Manager Interview Questions
- Larsen & Toubro Limited Civil Site Engineer Interview Questions
- Larsen & Toubro Limited Senior Engineer Interview Questions
- Larsen & Toubro Limited Civil Engineer Interview Questions
- Larsen & Toubro Limited Site Engineer Interview Questions
- Larsen & Toubro Limited Assistant Construction Manager Interview Questions
- Larsen & Toubro Limited Electrical Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Electrical Foreman Interview Questions
- Mechanical Foreman Interview Questions
- Civil Foreman Interview Questions
- Hvac Foreman Interview Questions
- Mechanical Maintenance Foreman Interview Questions
- Senior Foreman Interview Questions
- Senior Civil Foreman Interview Questions
- Mines Foreman Interview Questions
- Show more
Larsen & Toubro Limited Foreman Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Larsen & Toubro Limited Foreman Reviews and Ratings
based on 17 reviews
Rating in categories
|
Assistant Manager
3.9k
salaries
|  ₹5 L/yr - ₹18.5 L/yr |
|
Senior Engineer
3.5k
salaries
| ₹4.5 L/yr - ₹12.5 L/yr |
|
Engineer
1.2k
salaries
| ₹1.6 L/yr - ₹9.3 L/yr |
|
Manager
1.1k
salaries
| ₹9.5 L/yr - ₹30 L/yr |
|
Assistant Construction Manager
1k
salaries
| ₹6 L/yr - ₹21.5 L/yr |
Tata Projects
Megha Engineering & Infrastructures
Shapoorji Pallonji Group
Kalpataru Projects International
- Home >
- Interviews >
- Larsen & Toubro Limited Interview Questions >
- Larsen & Toubro Limited Foreman Interview Questions
