Filter interviews by
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 2 interview rounds.
Selection of a cable involves considering factors like voltage rating, current carrying capacity, insulation material, and environmental conditions.
Determine the voltage rating required for the application.
Calculate the current carrying capacity needed based on the load.
Select the appropriate size and type of cable based on the current rating.
Consider the insulation material suitable for the environment (e.g. PVC, XLPE...
Load factor is the ratio of the average load to the maximum load that a system can handle.
Load factor is calculated by dividing the average load by the maximum load capacity.
It is used to measure the efficiency of a system or equipment in handling varying loads.
For example, a power plant with a load factor of 0.8 means it is operating at 80% of its maximum capacity.
The tertiary winding in a power transformer is important for providing a path for zero-sequence currents and reducing harmonics.
Provides a path for zero-sequence currents, which helps in balancing the three-phase system
Reduces harmonics in the system, improving power quality
Helps in limiting fault currents and improving the overall efficiency of the transformer
To check if a lightning arrestor is working fine, you can perform visual inspections, check for physical damage, test for continuity, and monitor surge protection levels.
Perform visual inspections for any signs of physical damage or wear
Check for loose connections or corrosion on the lightning arrestor
Test for continuity using a multimeter to ensure proper electrical connection
Monitor surge protection levels to ensure ...
I applied via Company Website and was interviewed in Oct 2022. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before Oct 2021. There were 4 interview rounds.
posted on 15 Apr 2022
I applied via Approached by Company and was interviewed before Apr 2021. There were 2 interview rounds.
posted on 20 Aug 2024
Welding symbols are used to communicate welding information on engineering drawings.
Welding symbols are used to indicate the type of weld, dimensions, and other important information related to the welding process.
They are typically composed of a reference line, arrow, and various symbols and letters.
Examples of welding symbols include fillet weld, groove weld, plug weld, and spot weld symbols.
Understanding welding sym...
Types of welding include MIG, TIG, stick, and flux-cored welding.
MIG welding uses a wire electrode and shielding gas to join metals.
TIG welding uses a tungsten electrode and inert gas to create a strong weld.
Stick welding, also known as shielded metal arc welding, uses a flux-coated electrode.
Flux-cored welding uses a tubular wire filled with flux to protect the weld.
Other types include spot welding, laser welding, and
Design engineers use a variety of tools to create and analyze designs.
Design software like AutoCAD, SolidWorks, or CATIA is commonly used for creating 2D and 3D models.
Simulation tools like ANSYS or COMSOL are used to analyze the performance of designs under different conditions.
Prototyping tools like 3D printers or CNC machines are used to create physical prototypes for testing.
Collaboration tools like Slack or Trello...
To create 3D models from 2D drawings, use CAD software to extrude, revolve, and loft shapes based on the dimensions and features shown in the drawings.
Import the 2D drawing into CAD software such as AutoCAD or SolidWorks
Identify key dimensions and features from the drawing
Use extrude, revolve, and loft commands to create 3D shapes based on the 2D geometry
Add details such as fillets, chamfers, and holes to complete the ...
posted on 25 Nov 2024
I applied via Campus Placement and was interviewed in Oct 2024. There was 1 interview round.
I joined the company because of its innovative projects and collaborative work environment.
Opportunity to work on cutting-edge projects
Collaborative work environment
Company's reputation in the industry
Career growth opportunities
I applied via Naukri.com and was interviewed in May 2024. There were 3 interview rounds.
Good learning and Teaching and growing
Good base knowledge and experience
Good base background and growth and knowledgeable
I applied via Approached by Company and was interviewed before Dec 2023. There were 2 interview rounds.
A treatment plant is a facility where wastewater is treated to remove contaminants before being discharged back into the environment.
Treatment plants use a combination of physical, chemical, and biological processes to remove pollutants from wastewater.
Common processes in treatment plants include screening, sedimentation, filtration, and disinfection.
Examples of treatment plants include sewage treatment plants, water t...
posted on 26 Dec 2022
I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.
Planning in construction involves creating a detailed roadmap for the project from start to finish.
It involves identifying the scope of work and setting project goals
Creating a timeline and schedule for the project
Allocating resources and determining budget
Identifying potential risks and developing contingency plans
Coordinating with stakeholders and ensuring compliance with regulations
Examples include creating a constr...
posted on 12 Sep 2024
I applied via Approached by Company and was interviewed in Aug 2024. There were 2 interview rounds.
Side member & cross member are structural components in a car's Body in White (BIW) that provide strength and support to the vehicle.
Side member: Longitudinal structural component that runs along the sides of the vehicle, providing support and rigidity.
Cross member: Horizontal structural component that connects the side members, adding strength and stability to the vehicle.
Examples: Side members can be found on the sid...
Annotations, PMI & GD&T are tools used in engineering to communicate design and manufacturing requirements.
Annotations are notes or labels added to a drawing to provide additional information.
PMI (Product Manufacturing Information) includes dimensions, tolerances, materials, and other specifications needed for manufacturing.
GD&T (Geometric Dimensioning and Tolerancing) is a system for defining and communicating enginee...
Beads and darts are decided based on design requirements, manufacturing constraints, and structural considerations in BIW members.
Consider design requirements such as stiffness, strength, and crashworthiness.
Take into account manufacturing constraints like tooling limitations and cost.
Evaluate structural considerations such as load distribution and stress concentrations.
Use simulation software to optimize bead and dart...
Various methods are used for making BIW (Body in White) including hydroforming, stamping, welding, and bonding.
Hydroforming: shaping metal using fluid pressure
Stamping: pressing metal into a desired shape
Welding: joining metal pieces together using heat
Bonding: using adhesives to attach metal components
Hydroforming uses fluid pressure to shape metal while forming uses mechanical force.
Hydroforming uses fluid pressure to shape metal while forming uses mechanical force
Hydroforming allows for complex shapes with uniform wall thickness, while forming may result in uneven thickness
Hydroforming is more cost-effective for large production runs, while forming is better for smaller quantities
Examples of hydroforming include a...
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of part features.
It helps ensure that parts fit together properly and function as intended.
GD&T uses symbols, such as position, concentricity, and flatness, to communicate tolerance requirements.
It is commonly used in...
Benchmarking is the process of comparing one's business processes and performance metrics to industry bests or best practices from other companies.
Benchmarking helps identify areas for improvement and opportunities for innovation.
It involves analyzing data and metrics to understand how well a company is performing compared to others in the industry.
Master section refers to a standardized set of criteria or best practic...
LMC & MMC refer to the conditions in which a part has the least or maximum amount of material respectively.
LMC is the condition where a part has the least amount of material, ensuring the smallest size of the feature.
MMC is the condition where a part has the maximum amount of material, ensuring the largest size of the feature.
These conditions are important in engineering design to ensure proper fit and function of part...
Sheet metal thickness is decided based on factors like material type, part geometry, function, and cost.
Consider material type and its properties (e.g. strength, ductility)
Analyze part geometry and required structural integrity
Evaluate function of the part and potential stresses it will endure
Factor in cost implications of different thickness options
Consult industry standards and guidelines for recommended thickness ra
based on 55 reviews
Rating in categories
Assistant Manager
1.1k
salaries
| ₹6 L/yr - ₹17 L/yr |
Senior Engineer
700
salaries
| ₹3 L/yr - ₹12 L/yr |
Assistant Construction Manager
532
salaries
| ₹5.5 L/yr - ₹17.5 L/yr |
Civil Site Engineer
382
salaries
| ₹1.2 L/yr - ₹8.4 L/yr |
Civil Engineer
339
salaries
| ₹1.8 L/yr - ₹9.4 L/yr |
Tata Projects
Shapoorji Pallonji Group
Hindustan Construction Company
GAMMON INDIA