Upload Button Icon Add office photos

Filter interviews by

L&T Construction Assistant Engineering Manager Interview Questions, Process, and Tips

Updated 3 Nov 2023

Top L&T Construction Assistant Engineering Manager Interview Questions and Answers

L&T Construction Assistant Engineering Manager Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What are the steps for selection of a cable?
  • Ans. 

    Selection of a cable involves considering factors like voltage rating, current carrying capacity, insulation material, and environmental conditions.

    • Determine the voltage rating required for the application.

    • Calculate the current carrying capacity needed based on the load.

    • Select the appropriate size and type of cable based on the current rating.

    • Consider the insulation material suitable for the environment (e.g. PVC, XLPE...

  • Answered by AI
  • Q2. What is load factor?
  • Ans. 

    Load factor is the ratio of the average load to the maximum load that a system can handle.

    • Load factor is calculated by dividing the average load by the maximum load capacity.

    • It is used to measure the efficiency of a system or equipment in handling varying loads.

    • For example, a power plant with a load factor of 0.8 means it is operating at 80% of its maximum capacity.

  • Answered by AI
  • Q3. What is the importance of the tertiary winding in a power transformer?
  • Ans. 

    The tertiary winding in a power transformer is important for providing a path for zero-sequence currents and reducing harmonics.

    • Provides a path for zero-sequence currents, which helps in balancing the three-phase system

    • Reduces harmonics in the system, improving power quality

    • Helps in limiting fault currents and improving the overall efficiency of the transformer

  • Answered by AI
  • Q4. How to check a lightning arrestor is working fine or not?
  • Ans. 

    To check if a lightning arrestor is working fine, you can perform visual inspections, check for physical damage, test for continuity, and monitor surge protection levels.

    • Perform visual inspections for any signs of physical damage or wear

    • Check for loose connections or corrosion on the lightning arrestor

    • Test for continuity using a multimeter to ensure proper electrical connection

    • Monitor surge protection levels to ensure ...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for L&T Construction Assistant Engineering Manager interview:
  • Electrical Power System
  • Transformers
  • Motors
  • Switchgear
  • Electrical protection
  • Electrical distribution
Interview preparation tips for other job seekers - Have thorough knowledge of the field you have an experience on. Clear your basics and also go for some depth study.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell the current area in which you are working?
  • Q2. We need to explain about the list of projects in which we have contributed.
Round 3 - HR 

(2 Questions)

  • Q1. Available time for joining?
  • Q2. Salary expectation

Interview Preparation Tips

Interview preparation tips for other job seekers - See the company job postings in the career portal.

I applied via Naukri.com and was interviewed before Oct 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical details based on experience
Round 3 - Technical 

(1 Question)

  • Q1. Explain your roles & responsibility
Round 4 - HR 

(1 Question)

  • Q1. Why l&t and what is your goal.

Interview Preparation Tips

Interview preparation tips for other job seekers - Need strong knowledge on technical based on your experience and better communication will helps lot.

Interview questions from similar companies

I applied via Approached by Company and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(8 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. Where do you see yourself in 5 years?
  • Q7. What are your strengths and weaknesses?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always write what you know about in your CV. Don't mention here and there things because Recruiter may ask you about that and when you're not able to answer it impacts negatively.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. WELDING SYMBOLS EXPLAIN
  • Ans. 

    Welding symbols are used to communicate welding information on engineering drawings.

    • Welding symbols are used to indicate the type of weld, dimensions, and other important information related to the welding process.

    • They are typically composed of a reference line, arrow, and various symbols and letters.

    • Examples of welding symbols include fillet weld, groove weld, plug weld, and spot weld symbols.

    • Understanding welding sym...

  • Answered by AI
  • Q2. TYPES OF WELDING
  • Ans. 

    Types of welding include MIG, TIG, stick, and flux-cored welding.

    • MIG welding uses a wire electrode and shielding gas to join metals.

    • TIG welding uses a tungsten electrode and inert gas to create a strong weld.

    • Stick welding, also known as shielded metal arc welding, uses a flux-coated electrode.

    • Flux-cored welding uses a tubular wire filled with flux to protect the weld.

    • Other types include spot welding, laser welding, and

  • Answered by AI
  • Q3. GD & T SYMBOLS
Round 2 - AUTODESK INVENTOR TOOLS TEST 

(2 Questions)

  • Q1. TOOLS DETAIL & EXPLAIN
  • Ans. 

    Design engineers use a variety of tools to create and analyze designs.

    • Design software like AutoCAD, SolidWorks, or CATIA is commonly used for creating 2D and 3D models.

    • Simulation tools like ANSYS or COMSOL are used to analyze the performance of designs under different conditions.

    • Prototyping tools like 3D printers or CNC machines are used to create physical prototypes for testing.

    • Collaboration tools like Slack or Trello...

  • Answered by AI
  • Q2. GIVE THE 2D DRAWING CREATED THE 3D MODELS
  • Ans. 

    To create 3D models from 2D drawings, use CAD software to extrude, revolve, and loft shapes based on the dimensions and features shown in the drawings.

    • Import the 2D drawing into CAD software such as AutoCAD or SolidWorks

    • Identify key dimensions and features from the drawing

    • Use extrude, revolve, and loft commands to create 3D shapes based on the 2D geometry

    • Add details such as fillets, chamfers, and holes to complete the ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - GIVE ME THE 2D DRAWING CREATED THE 3D MODELS

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. Electrical engineers
  • Q2. Electrical digine eng
  • Q3. Why joined your company
  • Ans. 

    I joined the company because of its innovative projects and collaborative work environment.

    • Opportunity to work on cutting-edge projects

    • Collaborative work environment

    • Company's reputation in the industry

    • Career growth opportunities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good excuse
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Good learning and Teaching and growing

Round 2 - Group Discussion 

Good base knowledge and experience

Round 3 - Aptitude Test 

Good base background and growth and knowledgeable

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your head high and just focus
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Process description of treatment plant
  • Ans. 

    A treatment plant is a facility where wastewater is treated to remove contaminants before being discharged back into the environment.

    • Treatment plants use a combination of physical, chemical, and biological processes to remove pollutants from wastewater.

    • Common processes in treatment plants include screening, sedimentation, filtration, and disinfection.

    • Examples of treatment plants include sewage treatment plants, water t...

  • Answered by AI
  • Q2. About different concepts of pid
Round 2 - HR 

(2 Questions)

  • Q1. Salary discussion and negotiation
  • Q2. French language proficiency
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical interview is tough Ok. What's critical path.? How do you plan?
  • Q2. What's planning in construction
  • Ans. 

    Planning in construction involves creating a detailed roadmap for the project from start to finish.

    • It involves identifying the scope of work and setting project goals

    • Creating a timeline and schedule for the project

    • Allocating resources and determining budget

    • Identifying potential risks and developing contingency plans

    • Coordinating with stakeholders and ensuring compliance with regulations

    • Examples include creating a constr...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for interview good .you should be good in technical round.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Approached by Company and was interviewed in Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Location replacement
Round 3 - Technical 

(1 Question)

  • Q1. Regarding resume point
Round 4 - Technical 

(1 Question)

  • Q1. Basics regarding technical

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, active to your interviewer and also be subjectual. Technically perfect isn’t everything, just becoming a good person at that time is everything.

L&T Construction Interview FAQs

How many rounds are there in L&T Construction Assistant Engineering Manager interview?
L&T Construction interview process usually has 3 rounds. The most common rounds in the L&T Construction interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in L&T Construction Assistant Engineering Manager interview?

Some of the top questions asked at the L&T Construction Assistant Engineering Manager interview -

  1. What is the importance of the tertiary winding in a power transform...read more
  2. How to check a lightning arrestor is working fine or n...read more
  3. What are the steps for selection of a cab...read more

Tell us how to improve this page.

People are getting interviews through

based on 3 L&T Construction interviews
Company Website
Job Portal
33%
33%
34% candidates got the interview through other sources.
Moderate Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.3
 • 396 Interviews
Dilip Buildcon Interview Questions
4.0
 • 138 Interviews
G R Infraprojects Interview Questions
4.1
 • 126 Interviews
AtkinsRealis Interview Questions
4.0
 • 83 Interviews
GMR Group Interview Questions
4.1
 • 72 Interviews
View all
L&T Construction Assistant Engineering Manager Salary
based on 328 salaries
₹5.7 L/yr - ₹17 L/yr
At par with the average Assistant Engineering Manager Salary in India
View more details

L&T Construction Assistant Engineering Manager Reviews and Ratings

based on 55 reviews

3.3/5

Rating in categories

3.1

Skill development

2.7

Work-Life balance

3.1

Salary & Benefits

3.9

Job Security

2.7

Company culture

2.7

Promotions/Appraisal

2.9

Work Satisfaction

Explore 55 Reviews and Ratings
Assistant Manager
1.1k salaries
unlock blur

₹6 L/yr - ₹17 L/yr

Senior Engineer
700 salaries
unlock blur

₹3 L/yr - ₹12 L/yr

Assistant Construction Manager
532 salaries
unlock blur

₹5.5 L/yr - ₹17.5 L/yr

Civil Site Engineer
382 salaries
unlock blur

₹1.2 L/yr - ₹8.4 L/yr

Civil Engineer
339 salaries
unlock blur

₹1.8 L/yr - ₹9.4 L/yr

Explore more salaries
Compare L&T Construction with

Tata Projects

4.3
Compare

Shapoorji Pallonji Group

4.2
Compare

Hindustan Construction Company

4.2
Compare

GAMMON INDIA

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview