Intercontinental Consultants & Technocrats Interview Questions, Process, and Tips

Q1. Test of cement How many types of test
Ans. 
There are several types of tests for cement to ensure quality and strength.
• Compression test to measure the strength of cement

• Fineness test to determine the particle size of cement

• Setting time test to assess the time taken for cement to set

• Soundness test to check for any volume changes in cement

• Chemical analysis test to determine the chemical composition of cement
Answered by AI
Add your answer
Q2. What is M40 describe
Ans. 
M40 is a concrete mix design with a compressive strength of 40 MPa.
• M40 is a designation for a concrete mix with a specified compressive strength of 40 megapascals.

• It is commonly used in construction for structures that require high strength, such as bridges and high-rise buildings.

• The mix typically consists of cement, sand, aggregate, and water in specific proportions to achieve the desired strength.

• Proper curing and t...read more
Answered by AI
Add your answer

Q1. Two types of road 1 Flexible pavement 2 Rigid pavement Road working process Surveying, NGL, Encroachment, OGL
Add your answer
Q2. 1:- FLEXIBLE PAVEMENT 1 Embankment :- taking thickness about 3M, large size of soil particles 75mm lumps and cloud. 95% compaction Liquid limit <50%, Plasticity limits <25% Swelling and shrinkage <...read more
Add your answer
Q3. WMM:- It is total thickness 300mm compacted by two layer 150mm and 150mm vibratery roller. It is mixture of aggregate 4.75mm to 20mm and binding material stone dust and morum..
Add your answer
Q4. Emulsion:- Prime coat :- low viscous cut back bitumen On wmm surfaces area filled by pores.and Void. Tackcoat:- light application bitumen asphalt , emulsion and dilute water on prime Coat
Add your answer
Q5. DBM:- Total thicknesses 150mm compacted.by two layer 75mm and 75mm by vibration roller. It is mixture of aggregate 20mm to 28mm. Bitumen VG30 grade.
Add your answer
Q6. Tack coat:' light application bitumen, asphalt, emulsion and diluted water on BC surfaces. BC :- TOTAL THICKNESSES 50MM COMPACTED , It is mixture of aggregate 13.1 mm to bitumen VG30 GRADE ue...read more
Add your answer
Q7. Premix carpeting :' toal thicknesses 6 to 8mm , it is mixture of aggregate and gravel spreading and rolling
Ans. 
Premix carpeting is a mixture of aggregate and gravel spread and rolled to a total thickness of 6 to 8mm.
• Premix carpeting is a type of road surface that is commonly used for low-traffic roads and driveways.

• It is made by mixing together aggregate and gravel, which are then spread and rolled to create a smooth surface.

• The total thickness of the premix carpeting is typically between 6 and 8mm.

• This type of road surface is ...read more
Answered by AI
Add your answer
Q8. Laying of bitumen. and aggregate temperature 130 degree celceious to 150 degree celceious Rollins of bitumen and aggregate temperature 80 degree celceious to 100 degree celceious.
Ans. 
Bitumen and aggregate are laid at high temperatures for better bonding and compaction.
• High temperature improves the workability of bitumen and aggregate.

• It helps in achieving better bonding and compaction.

• Rolling at lower temperature ensures that the mixture is not damaged.

• The temperature range may vary depending on the type of bitumen and aggregate used.
Answered by AI
Add your answer
Q9. RIGID PAVEMENT 1:- DLC 150MM THICKNESSES COMPACTED , TOLERANCE +_6MM 2:-PQC:' 300MM THICKNESSES COMPACTED ,TOLERANCE +_ 6MM
Add your answer
Q10. DLC:- Material sutabilitey 1:- Aggregate size 26.5mm 2:- Max water absorption 2% 3 :- Soundness test:- Naso4=12% Mgso4 =18% 4:- An...read more
Add your answer
Q11. Design procedure:-1: use M15 grade concrete, aggregate and cement ratio 12:2 1 :- The minimum cement content 150kg percum, if fly ash is more than 20% Minimum cement content 120 kg percum 2:- Compressi...read more
Ans. 
The design procedure for M15 grade concrete using specified ratios and minimum cement content, along with proper handling and curing techniques.
• Use M15 grade concrete with aggregate and cement ratio of 12:2

• Minimum cement content of 150kg percum, or 120kg percum if fly ash is more than 20%

• Compressive strength testing of 5no sample cube concrete after 7 days curing

• Ensure DLC mix is homogeneous and uniform in premix batch...read more
Answered by AI
Add your answer
Q12. PQC:- Material sutabilitey 1:- aggregate size 31.5mm DLC and pqc material suitability is same Water absorption to aggregate shall not be reative.
Add your answer
Q13. DESISGN PROCEDURE:- 1;- use. M40 GRADE CONCRETE 2:-Minimum cement content 360kg percum If fly ash is more than 20% the minimum cement contents 310kg percum. 3:- The flexuar strength cement co...read more
Ans. 
Explanation of design procedure for M40 grade concrete with dowel bars and tie bars.
• Minimum cement content of 360kg percum for M40 grade concrete

• Dowel bars of size 32mm S240 length 300mmC/C and PVC dowel sheet size 34mm×100 micron

• Tie bars of size 12mm dia tor bar length of tie bar 1m and spacing 300mmc/c

• Premix batching plant material is homogeneous and uniform with workability of less than 25mm+-10mm

• Separation membrane...read more
Answered by AI
Add your answer
Q14. CBR:- Developed by the California divisions State of highway to classify 1- Soil sub grade 2:- GSB Thicknesses of pavement T= (1.75P/CBR- A/3.14) A= p(1 + r)^m+n Supper elevation e + f =v...read more
Add your answer
Q15. National highway 2 to 4 lane Express Way 6 to 8 lane Express Way many smart intelligent features HTMS =high trafic management system VIDS= visual incident deductions system Express Way man...read more
Add your answer

Q1. Assessing Technical Competence
Add your answer
Q2. Assessing Communication, analytical skills
Add your answer

Q1. Previous Job Experience
Ans. 
I have over 10 years of experience in various leadership roles, including managing teams, overseeing operations, and implementing strategic initiatives.
• Managed a team of 50+ employees in a retail setting, leading to a 20% increase in sales within the first year

• Implemented new processes and procedures to streamline operations and improve efficiency

• Developed and executed strategic plans to drive business growth and incre...read more
Answered by AI
Add your answer
Q2. Outlining achievements, certifications, etc.
Ans. 
I have achieved a Master's degree in Business Administration and obtained certifications in project management.
• Master's degree in Business Administration

• Certifications in project management

• Led successful projects resulting in cost savings and increased efficiency
Answered by AI
Add your answer

Q1. Basic knowledge is very important for any interview without basic knowledge you can't crack any interview
Add your answer

Group discussion with senior and ask your advise for your stream and your interest area

Q1. They will ask about your communication skills, representation skills,your body language and your attitude
Add your answer

Q1. What is Schedule-H
Ans. 
Schedule-H is a list of drugs in India that are subject to stricter regulations due to their potential for abuse or misuse.
• Schedule-H drugs can only be sold with a prescription from a registered medical practitioner.

• These drugs are often narcotics, psychotropic substances, or other highly potent medications.

• The sale of Schedule-H drugs is closely monitored to prevent misuse and abuse.

• Examples of Schedule-H drugs includ
Answered by AI
Add your answer
Q2. Highway costing
Add your answer