AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Intercontinental Consultants & Technocrats Senior Highway Engineer Interview Questions, Process, and Tips
Intercontinental Consultants & Technocrats Senior Highway Engineer Interview Experiences
1 interview found
(15 Questions)
- Q1. Two types of road 1 Flexible pavement 2 Rigid pavement Road working process Surveying, NGL, Encroachment, OGL
- Q2. 1:- FLEXIBLE PAVEMENT 1 Embankment :- taking thickness about 3M, large size of soil particles 75mm lumps and cloud. 95% compaction Liquid limit <50%, Plasticity limits <25% Swelling and shrinkage <...
- Q3. WMM:- It is total thickness 300mm compacted by two layer 150mm and 150mm vibratery roller. It is mixture of aggregate 4.75mm to 20mm and binding material stone dust and morum..
- Q4. Emulsion:- Prime coat :- low viscous cut back bitumen On wmm surfaces area filled by pores.and Void. Tackcoat:- light application bitumen asphalt , emulsion and dilute water on prime Coat
- Q5. DBM:- Total thicknesses 150mm compacted.by two layer 75mm and 75mm by vibration roller. It is mixture of aggregate 20mm to 28mm. Bitumen VG30 grade.
- Q6. Tack coat:' light application bitumen, asphalt, emulsion and diluted water on BC surfaces. BC :- TOTAL THICKNESSES 50MM COMPACTED , It is mixture of aggregate 13.1 mm to bitumen VG30 GRADE ue...
- Q7. Premix carpeting :' toal thicknesses 6 to 8mm , it is mixture of aggregate and gravel spreading and rolling
- Ans.
Premix carpeting is a mixture of aggregate and gravel spread and rolled to a total thickness of 6 to 8mm.
Premix carpeting is a type of road surface that is commonly used for low-traffic roads and driveways.
It is made by mixing together aggregate and gravel, which are then spread and rolled to create a smooth surface.
The total thickness of the premix carpeting is typically between 6 and 8mm.
This type of road surface is ...
- Q8. Laying of bitumen. and aggregate temperature 130 degree celceious to 150 degree celceious Rollins of bitumen and aggregate temperature 80 degree celceious to 100 degree celceious.
- Ans.
Bitumen and aggregate are laid at high temperatures for better bonding and compaction.
High temperature improves the workability of bitumen and aggregate.
It helps in achieving better bonding and compaction.
Rolling at lower temperature ensures that the mixture is not damaged.
The temperature range may vary depending on the type of bitumen and aggregate used.
- Q9. RIGID PAVEMENT 1:- DLC 150MM THICKNESSES COMPACTED , TOLERANCE +_6MM 2:-PQC:' 300MM THICKNESSES COMPACTED ,TOLERANCE +_ 6MM
- Q10. DLC:- Material sutabilitey 1:- Aggregate size 26.5mm 2:- Max water absorption 2% 3 :- Soundness test:- Naso4=12% Mgso4 =18% 4:- An...
- Q11. Design procedure:-1: use M15 grade concrete, aggregate and cement ratio 12:2 1 :- The minimum cement content 150kg percum, if fly ash is more than 20% Minimum cement content 120 kg percum 2:- Compressi...
- Ans.
The design procedure for M15 grade concrete using specified ratios and minimum cement content, along with proper handling and curing techniques.
Use M15 grade concrete with aggregate and cement ratio of 12:2
Minimum cement content of 150kg percum, or 120kg percum if fly ash is more than 20%
Compressive strength testing of 5no sample cube concrete after 7 days curing
Ensure DLC mix is homogeneous and uniform in premix batch...
- Q12. PQC:- Material sutabilitey 1:- aggregate size 31.5mm DLC and pqc material suitability is same Water absorption to aggregate shall not be reative.
- Q13. DESISGN PROCEDURE:- 1;- use. M40 GRADE CONCRETE 2:-Minimum cement content 360kg percum If fly ash is more than 20% the minimum cement contents 310kg percum. 3:- The flexuar strength cement co...
- Ans.
Explanation of design procedure for M40 grade concrete with dowel bars and tie bars.
Minimum cement content of 360kg percum for M40 grade concrete
Dowel bars of size 32mm S240 length 300mmC/C and PVC dowel sheet size 34mm×100 micron
Tie bars of size 12mm dia tor bar length of tie bar 1m and spacing 300mmc/c
Premix batching plant material is homogeneous and uniform with workability of less than 25mm+-10mm
Separation membrane...
- Q14. CBR:- Developed by the California divisions State of highway to classify 1- Soil sub grade 2:- GSB Thicknesses of pavement T= (1.75P/CBR- A/3.14) A= p(1 + r)^m+n Supper elevation e + f =v...
- Q15. National highway 2 to 4 lane Express Way 6 to 8 lane Express Way many smart intelligent features HTMS =high trafic management system VIDS= visual incident deductions system Express Way man...
Interview Preparation Tips
Single lane=3.75 Km
Multiple lane 3.50 km
Intermediate lane = 5.50m
Double lane= 7.5 m
Three lane = 10.50 m
Four lane =7.5 m + 7.5m
Shoulder 2m to 3.5m
Flexible pavement minimum age 15 year and operating periods whichever more
Rigid pavement minimum age 30year and operating periods whichever more.
4 to 6 lane ROW =60 m
Max widh of vechile as per IRC 2.44m
Longitudinal friction .35 to .40 cofficent
Transverse friction .15 cofficent
Top trending discussions
Interview questions from similar companies
Interview Questionnaire
1 Question
- Q1. Hard core techanical
Senior Engineer Interview Questions & Answers
L&T Energy Hydrocarbon
Anonymous
posted on 11 Apr 2021
I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.
Interview Questionnaire
6 Questions
- Q1. Can you explain Man day
- Q2. Can you explain manpower mobilization.
- Ans.
Manpower mobilization refers to the process of deploying and managing personnel for a specific project or task.
Identifying the required personnel for a project
Recruiting and hiring personnel
Training and orienting personnel to the project
Assigning roles and responsibilities to personnel
Managing personnel performance and productivity
Ensuring compliance with labor laws and regulations
Examples include mobilizing a construc...
- Q3. How to cost control in project
- Ans.
Cost control in project can be achieved through effective planning, monitoring and controlling of project expenses.
Create a detailed project budget and stick to it
Track expenses regularly and adjust budget as needed
Identify and eliminate unnecessary expenses
Negotiate with vendors for better pricing
Implement cost-saving measures without compromising quality
Use project management tools to monitor expenses and progress
Reg...
- Q4. Can you explain how to handle clinent
- Ans.
Handling clients requires effective communication, understanding their needs, and providing timely solutions.
Listen actively to their concerns and requirements
Communicate clearly and professionally
Provide timely updates and solutions
Build a strong relationship based on trust and respect
Be proactive in identifying and addressing potential issues
Ensure customer satisfaction by going above and beyond expectations
- Q5. Flow chart for manpower mobilization
- Ans.
Manpower mobilization flow chart involves identifying needs, planning, recruitment, training, and deployment.
Identify the need for manpower
Plan the recruitment process
Source and screen candidates
Conduct interviews and assessments
Select and hire candidates
Provide training and orientation
Deploy manpower to required locations
- Q6. Prepared organisation chat for project handling
Interview Preparation Tips
Selected
I applied via Job Portal and was interviewed before Dec 2021. There were 3 interview rounds.
(1 Question)
- Q1. Control valves on-off valves
(1 Question)
- Q1. PSV pressure regulators
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed before Nov 2022. There were 3 interview rounds.
(2 Questions)
- Q1. Basics of what ur past experience
- Q2. Basic of shuttering and concreting
(1 Question)
- Q1. What u r past experience
Interview Preparation Tips
No fixed timing of work. Only top management is supportive down the line everyone is of cheap mentality. Not recommend to join the company as u will regret later. Not even cable to achieve 1 star
dilipkumar sharma
(2 Questions)
- Q1. Field related building materials
- Q2. Building materials
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.
(1 Question)
- Q1. Civil engineering related Questions
(1 Question)
- Q1. Salary related discussion
Selected
I appeared for an interview in Sep 2024, where I was asked the following questions.
- Q1. What a IS Code of Design Mix ?
- Ans.
IS Code of Design Mix refers to Indian Standards for concrete mix design, ensuring quality and performance in construction.
IS 456:2000 provides guidelines for plain and reinforced concrete design.
IS 10262:2019 outlines the procedure for concrete mix design.
Mix design considers factors like workability, strength, and durability.
Example: A mix design for M25 concrete specifies a ratio of 1:1:2 (Cement:Sand:Aggregate).
The...
- Q2. What are the Welding method of steel?
- Ans.
Welding methods for steel include various techniques like MIG, TIG, and Stick welding, each suited for different applications.
MIG Welding (Gas Metal Arc Welding) - Uses a continuous wire feed and is ideal for thin to medium thickness steel.
TIG Welding (Gas Tungsten Arc Welding) - Provides high precision and is suitable for thin materials and stainless steel.
Stick Welding (Shielded Metal Arc Welding) - Versatile and com...
- Q3. What are the advantage of steel shuttering?
- Ans.
Steel shuttering offers durability, reusability, and precision in construction, enhancing project efficiency and quality.
Durability: Steel shuttering can withstand harsh weather conditions and heavy loads, making it suitable for large-scale projects.
Reusability: Unlike timber, steel can be reused multiple times, reducing material costs over time.
Precision: Steel shuttering provides a high level of accuracy in dimension...
- Q4. What are the benefits of using Composite Plate?
- Ans.
Composite plates offer enhanced strength, lightweight properties, and design flexibility for various applications.
High strength-to-weight ratio: Composite plates are significantly lighter than metals, making them ideal for aerospace applications.
Corrosion resistance: They resist environmental degradation, suitable for marine and chemical industries.
Design flexibility: Can be molded into complex shapes, allowing for inn...
- Q5. How do you lay blocks in block work
- Ans.
Laying blocks involves precise techniques for alignment, mortar application, and ensuring structural integrity.
Prepare the foundation: Ensure the base is level and clean before starting.
Mix mortar: Use the right ratio of cement, sand, and water for optimal adhesion.
Lay the first block: Start at a corner, applying mortar to the bottom and sides.
Check alignment: Use a level to ensure blocks are straight and even.
Stagger ...
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
URC Construction
Prakash Swamiappan
posted on 31 Jan 2024
About site experience
(1 Question)
- Q1. Site execution technical
I applied via Referral and was interviewed in Dec 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Cube Compressive achieving Percentage time periods?
- Ans.
Cube compressive achieving percentage time periods
The question is asking about the percentage of time periods in which cube compressive strength is achieved
Cube compressive strength refers to the ability of a cube-shaped material to withstand compression
The answer may involve calculating the percentage of time periods in which the cube meets the required compressive strength
Examples of data points needed: time periods,
- Q2. M20 grade and M means and 20 means and unit
- Q3. 1:1.5:3 ,M-Mix,20 -Compresive strength,N/mm²
Interview Preparation Tips
Intercontinental Consultants & Technocrats Interview FAQs
Some of the top questions asked at the Intercontinental Consultants & Technocrats Senior Highway Engineer interview -
Tell us how to improve this page.
Intercontinental Consultants & Technocrats Interviews By Designations
- Intercontinental Consultants & Technocrats Deputy General Manager Interview Questions
- Intercontinental Consultants & Technocrats Assistant Manager Interview Questions
- Intercontinental Consultants & Technocrats Resident Engineer Interview Questions
- Intercontinental Consultants & Technocrats Assistant Engineer Interview Questions
- Intercontinental Consultants & Technocrats Highway Design Engineer Interview Questions
- Intercontinental Consultants & Technocrats Legal Manager Interview Questions
- Intercontinental Consultants & Technocrats Senior Highway Engineer Interview Questions
- Intercontinental Consultants & Technocrats Bridge Design Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Highway Engineer Interview Questions
- Assistant Highway Engineer Interview Questions
- Manager Highway Interview Questions
- Civil Engineer-Highway/Roadway Interview Questions
- Highway Design Engineer Interview Questions
- Highway Supervisor Interview Questions
- Highway Site Engineer Interview Questions
- Junior Highway Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
|
Assistant Manager
57
salaries
|  ₹2.9 L/yr - ₹7.2 L/yr |
|
Deputy Manager
57
salaries
| ₹4.4 L/yr - ₹10.5 L/yr |
|
Assistant Highway Engineer
36
salaries
| ₹3.6 L/yr - ₹6.1 L/yr |
|
Manager
34
salaries
| ₹6.2 L/yr - ₹10.8 L/yr |
|
Highway Design Engineer
30
salaries
| ₹4.2 L/yr - ₹5.8 L/yr |
AECOM
L&T Energy Hydrocarbon
Apco Infratech
Saipem
- Home >
- Interviews >
- Intercontinental Consultants & Technocrats Interview Questions >
- Intercontinental Consultants & Technocrats Senior Highway Engineer Interview Questions
